| Description | | |
| Weight |
1.12 lbs |
| Dimensions |
9.75 × 4.25 × 2.25 in |
| The JT-10 is precision CNC-machined from solid aerospace billet aluminum. It is not a cheap forging. This is a top-tier DPMS 308 lower receiver perfect for any high quality 308 build. |
Billet .308 lower receiver manufactured by Quentin Defense, made in Gilbert, Arizona.
| Black Anodized 80% DPMS 308 lower with Lower Parts Kit |
| Content | 80% Lowers are NOT a firearm and CAN ship directly to your home.
Additional machining will be required to complete the firearm. Purchasing a Jig and having access to a router or mill is required to manufacture this into a firearm.
80% Arms manufactures billet lowers using US sourced aerospace grade 6061 aluminum which is more resistant to corrosion and is much easier to mill than any other alloy used to make lower receivers. Their lowers carry a lifetime warranty.
Features:
- DPMS Gen 1 Pattern Compatibility
- Type III Hard Anodized Black to Milspec
- Compatible with both DPMS and SR-25 Magazines.
- 5 axis CNC machined from billet to extremely tight tolerances
- Integral trigger guard
- Semi / Safe selector marking engraved on both sides
- Ultra-tough reinforced billet design
- Broached magwell
- CMMG Mk3 lower Parts Kit is recommended for 80% Arms 308 lowers
- Rear takedown lug area comes already milled out
*Operations left to complete are as follows: fire control group, trigger pin, hammer pin, trigger slot and safety selector.
THIS IS NOT A FIREARM "NO FFL REQUIRED" CAN SHIP DIRECTLY TO YOUR HOME!!
All GCA and NFA rules apply when you complete this project. Please ensure you fully understand your local and federal laws before completing this 80% blank into a functioning receiver. |
308 80% Lower Receiver DPMS Platform
The 308 80% Lower Receiver is Patterned from DPMS Style LR-308 Lower. This Lower is manufactured from Hard Billet 7075 T6 Aluminum to exact tolerances for a precision fit and feel. The 308 Lower has a Broached Magwell and accepts DPMS 308/SR-25 magazines. Additionally, the Lower has a Integrated Semi drop Trigger guard with large area for almost all shooting even with gloves in cold environments. Upon Completion the 80% lower is designed to use a standard DPMS Pattern Lower Parts Kit along with the use of standard AR Platform Buffer tube extension and your stock of choice.
Specifications:
- Machined From 7075-T6 Aluminum
- DPMS Gen 1 Type 308 Lower Receiver
- Hardcoat Type III Anodizing
- Broached Magazine Well
- Integral Trigger Guard
- Fits Almost All 308 DPMS Style Upper Receivers
The operations left to be completed on our 80% 308 lower is as follows:
-
-
- fire control group
- trigger pin
- hammer pin
- trigger slot
- safety selector hole.
The 80% Lower Receiver is not an Federal Firearms License item. This receiver is machined to 80 percent and still requires machining to be completed. You can Find out more at The ATF Website about building your own Rifle from a Receiver Blank here.
| Weight |
2.5 lbs |
| Brand |
Daytona Tactical |
| Color |
Black |
| Platform |
AR-10 |
| 80% 308 CNC Lower Receiver FDE
- Matches with Aero Precision M5 upper receiver.
- Works with DPMS parts & magazines
- Flat Dark Earth Cerakote (Magpul H-267Q)
- Fully CNC machined from solid 6061 aircraft grade aluminum
- We ONLY purchase raw aluminum manufactured in USA
- Broached magwell
- Integrated trigger guard
- 6-32 threaded pin/screw, for the bolt catch. (replaces roll pin)
- Added nylon tipped torsion screw in rear of lower.
| The JT-10 is precision CNC-machined from solid aerospace billet aluminum. It is not a cheap forging. This is a top-tier DPMS 308 lower receiver perfect for any high quality 308 build.
- JUGGERNAUT TACTICAL applies its own Cerakote: ceramic-based thermoset epoxy finish in 4 color selections, which include Magpul FDE, Sniper Grey, Magpul OD Green, and Burnt Bronze.
- The non-Cerakote finish options include Black Anodized and Pink Anodized.
- T6 Heat-Treated 6061 Billet Aluminum
- Completed weight: 10 ounces
- Integral winter trigger-guard for added strength
- Flared magwell to improve mag changes.
- Laser engraved JTAC logo
- Broached magwell
- DPMS .308 AR-10
- Threaded bolt catch • Upper tensioning screw
- Bolt catch assembly screw
- No roll pins need for assembly
- Ambi Bolt Release/hardware
- Lifetime warranty against manufacture defects
- Threaded rear takedown pin detent hole
- Semi safe engraved on both sides
If you would like to finish your JT-10 80% Lower at home, we offer a jig-kit here. Because 80% Lowers are not considered firearms by ATF, we can ship them right to your front door with no FFL required... but finished rifles must meet all applicable laws and you must be able to legally own a firearm. Compliance with all laws is YOUR responsibility. | Quentin Defense Billet Lower Receiver. LR308 Style.
-Manufactured from a solid billet block of aerospace grade 6061-T6 aluminum.
-Accepts most upper receivers designed from the LR308 platform.
-Accepts all standard mil-spec AR15 internals.
-Will accept mil-spec or commercial receiver extension.
-Must ship to a licensed firearms dealer (FFL) in your state of residence.
-AZ residents are welcome to pick up at our facility in Gilbert, Arizona Select local pickup at check out.
This is a firearm purchase and all firearm purchases require an FFL to ship to. Please include your desired FFL for transfer in the comments section when making your purchase and we will contact the dealer on your behalf.
**We are a licensed firearms dealer (FFL Holder), all firearm sales require a federal background check. Local firearms transactions can be completed in person at our store in Gilbert, AZ or we can ship to your desired FFL holder for transfer. Buyer assumes all shipping costs, transfer fees may be incurred at time of transfer, check with your FFL Dealer for details. All State and Federal Laws apply to every firearm transaction. Check your local laws to ensure the legality of your purchase prior to making said purchase. All applicable taxes apply.**
Additional information
| Weight |
28 oz |
| MANUFACTURER: |
Quentin Defense |
| Color |
Black (BLK) |
| Material: |
6061 T6 Aluminum |
| Coating: |
Type III Class 2 Hard Coat Anodize |
| Specification: |
DPMS Style |
|
80% Black DPMS AR-10/308 Lower Receiver with Lower Parts Kit
The 80% Black Anodized DPMS 308 Lower receiver and LPK Value Buy has been put together with 7075-T6 Hardcoat Anodized Lower. Along with our AR-10/308 Lower comes with a complete AR-10 LPK ready to complete the internal workings of your lower once it has been machined to completion.
The operations left to be completed on our 80% lower is as follows:
- fire control group
- trigger pin
- hammer pin
- trigger slot
- safety selector hole.
Features of the 308 Lower and LPK value Pack:
- DPMS 80% Lower and Lower Parts Kit
- Lower Hardcoat Type III Anodized
- Complete LPK including fire control Group
- Savings of Approx. 10% off buying separately
The 80% Lower Receiver is not a Federal Firearms License item. This receiver is machined to 80 percent and still requires machining to be completed.
| Weight |
6 lbs |
| Color |
Black |
| Platform |
AR-10 |
| Lower Material |
7075 T6 Aluminum |
|
| Additional information |
| Add an 80% Lower Completion Jig |
NO Jig Provided, Include 80% Arms Easy Jig Gen 2 Multiplatform (AR-15 / AR-9 / LR308) [Add $234.95]
|
| Add Router Jig Tool Kit*: |
None, 80% Arms Easy Jig Gen 2 Toolkit (Gen 2 Jig Only) [Add $47.99]
|
| | |
| Type of Finish |
None, Raw, Black Anodized (+$5.00), Cerakote Burnt Bronze (+$30.00), Cerakote Magpul OD Green (+$30.00), Cerakote Magpul FDE (+$30.00), Cerakote Sniper Grey (+$30.00)
|
| | |
Reviews
There are no reviews yet.