| Content | (1) Black Fire/Safe Marked AR15 Forged 80% Lower Receiver:
- For AR-15 builds (5.56/.223/300 BLK/6.5 Grendel)
- Color: Anodized Black
- Type III Hard Anodized
- 100% Mil-Spec
- Quantity: 1
- Fire/Safe Marked: Yes
- Forged 7075-T6 Aluminum
- Broached Magwell
- 100% Made in the USA
- NO FFL REQUIRED
No FFL is required to purchase this lower receiver. This forged 7075 aluminum 80% lower receiver is not considered a firearm and is compliant with the gun control act of 1968 not classified as a firearm as defined in 18 U.S.C. 921(a)(3) | Description
(1) Raw 80% Lower Billet Receiver:
- Color: Raw - no anodization
- 100% Mil-Spec
- Quantity: 1
- Fire/Safe Marked: Yes
- Oversized built-in trigger guard
- Rear takedown lug is pre-milled
- Billet 6061-T6 Aluminum
- 100% Made in the USA
- NO FFL REQUIRED
No FFL is required to purchase this lower receiver. This Billet 6061-T6 Aluminum 80% lower receiver is not considered a firearm and is compliant with the gun control act of 1968 and not classified as a firearm as defined in 18 U.S.C. 921(a)(3).
Shipping Restrictions
AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.
| Description
Polymer80 has attacked the AR-10 80% lower with a new, ultralight approach! Introducing the Warrhogg .308 AR-10 Polymer 80% lower, the world’s lightest DPMS-platform .308 lower on the market. This new contender addresses a big problem for AR-15s chambered in .308, and that’s weight.
Lightweight and maneuvrability have always plagued the AR-10 and .308 AR-15 platform, until now. Weighing less than half a pound, the Warrhogg .308 80% lower promises to change the game – but is it strong enough?
Made from weapons-grade polymer!
The Warrhogg AR-10 80% lower is constructed from the same reinforced material that all current-production, off-the-shelf polymer firearms are built from. Polymer80 took the same to repeatedly test and re-develop their polymer lowers until they achieved a unit capable of handling thousands of rounds without failure.
The Warrhogg comes reinforced, ready for battle!
The Warrhogg .308 lower features plenty of reinforcements based on real testing to guarantee reliability. Polymer80 beefed up the buffer tube ring, reinforced the receiver with a solid core, added ribbing across the entire top surface, and developed a no-thread pistol grip mount. Lastly, the mag well has been stiffened, all while retaining a featherweight profile.
For instructions on the Warrhogg, click here.
Warrhogg .308 AR-10 Polymer 80% Lower features:
- Weighs less than half a pound!
- Includes 80% lower jig
- Includes all necessary tooling
- Includes pistol grip nut and screw
- Reinforced Polymer Construction
- Integrated trigger guard
- Gripped mag well for ergonomics
- Compatible with all 80% lower Jigs
- Compatible with DPM Gen 1 Lower Parts Kit
| What is an Anodized 80% Lower Receiver?
You can rest assured of quality with this Anodized 80% Lower Receiver. All of our products are made in Greer, SC in our precision machine shop.
With an 80% lower, it is often referred to as a “paperweight” or a “ghost gun”. Until you complete your build, the 80% lower is not considered a firearm or a complete receiver. Because it’s not a firearm, no FFL is necessary to buy, ship, or receive the product.
When the lower comes anodized, as ours does here, it has had a protective coat created by oxidizing the aluminum. This is sometimes also referred to as a hard coat. The anodization helps to protect the lower from wear and tear, as well as any potential corrosion.
If you are considering building out an AR-15, buy the made in the USA Anodized 80% Forged Lower from Palmetto State. We stand behind the quality of our products and don’t let anything leave our shop without meeting our quality and precision standards.
We guarantee the accuracy and alignment of our lowers. Your 80% lower is built with the strongest aluminum (7075) and provides a slightly lighter feel compared to a billet option.
With an 80% forged lower, there is no serial or registration required since it is not a firearm. If you live in a not-so-friendly gun state, be sure you are well aware of the laws before purchasing.
Please note: We are not able to legally ship to NY, NJ, CT, RI, or DC. If you place an order with a shipping address for one of these states, the order will be canceled. | This AR-15 Skeleton 80% lower is to the same standard of quality and performance, skeletonized in an appealing geometric design.
- The product specs:
- Full mil-spec part compatibility ensures maximum rifle customization
- Forged from 7075-T6 aluminum
- Black anodized finish
- This is NOT a complete receiver and therefore not an FFL item
- The Magwell on this 80 percent lower receiver is is skeletonized for appearance, but does not hinder performance at all!
- Withstands harsh punishment from any situation using tough design, precision machined from aircraft-grade aluminum for optimal strength
- Made in the USA
Where Can’t we ship? : Shipping to New Jersey, New York, Hawaii, Connecticut, Rhode Island and Washington D.C. is not possible due to state regulations against 80% lowers.
NOTE: If you have any questions or concerns our world-class customer support is here for you. Please give us a call, email us or message our live support chat.
If you are looking to purchase more than one. The bulk option is available at: 80% Lower Bulk Receivers (5-Pack) – Black
No FFL Required! This product listing is an 80% lower, meaning that it is not a firearm, and therefore requires no FFL transfer in order to be shipped.
If no “Add to Cart” button is visible, it means we do not have any stock of this product. Keep checking back to see if the item is in stock, or join the waiting list for this product and be notified via email when the product comes back in stock! This option is only available for members with valid emails!
Here at AR-15 Site, strive to give our customers the highest quality 80% lower AR-15 and polymer 80 parts on the market! Give us a call or visit our support with any products you might be having trouble with. Any reviews we receive on our 80% Lower products will be taken into account with great care. | DESCRIPTION
- Manufactured in our own precision machine shop right here in Greer, South Carolina.
- Raw (Non-Anodized)
- Forged in 7075-T6 Aluminum
- Broached and Flared Magwell
- Tumbled and Hand De-Burred
- ATF Approved
ALL PAID ORDERS WILL BE SHIPPED ASAP! FORGINGS ON HAND AND MACHINING 24/7!
What is an 80% Lower Receiver?
This 80% lower receiver is manufactured in the USA in our precision machine shop in Greer, South Carolina. Sometimes referred to as a “paperweight”, the 80% lower is not considered a firearm or a complete receiver until you finish it. Therefore, no FFL is required in order to buy or ship the product.
When you are looking to build out your AR, buy the American-made 80% forged lower from Palmetto State. Nothing leaves our machine shop that doesn’t meet our precision standards for quality. You can be assured of a highly accurate and aligned lower. Made with forged 7075 aluminum, your 80% lower is built with the strongest aluminum and provides a slight advantage in weight compared to a billet option.
Some manufacturers use cheaper aluminum and are not as concerned with precision machining, leaving you dissatisfied with an inferior product. At Palmetto State Defense, we stand behind the quality of our 80% lowers.
With an 80% forged lower, there is no serial or registration required since it is not a firearm. If you live in a not-so-friendly gun state, be sure you are well aware of the laws before purchasing.
|
Reviews
There are no reviews yet.