Sale!
In Stock

P80 PF940C 80 Percent Compact Pistol Frame Kit – Black

$129.99

Category: Tag:

Description

Shipment Not Available to: California, Connecticut, District of Columbia, Hawaii, Maryland, Massachusetts, New Jersey, New York, Pennsylvania, Rhode Island, Washington

PF940C™ Compact Frame

PLEASE NOTE WHEN USING LONE WOLF DIST. COMPLETION PARTS, NOT ALL PARTS MAY BE GEN 3, YOU MUST USE GEN 3 ONLY, ANY OTHER PARTS INSTALLED MAY CAUSE DAMAGE AND WILL IMMEDIATELY VOID THE LIFETIME WARRANTY OF YOUR POLYMER80 PRODUCT. CHECK ALL COMPONENTS PRIOR TO INSTALLATION. POLYMER80, INC. IS NOT RESPONSIBLE FOR DAMAGES CAUSED BY INCORRECT PARTS INSTALLATION.

Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. The frame comes with an aggressive texture that emulates a stippled pattern.  Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation.

Product Overview:

  • Enhanced Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Aggressive and Adaptable Grip Texture
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Rear Rail Module (RRM™)
  • Hardened Pins for LBRS ™ and RRM™
  • Complete Finishing Jig, Drill bits
  • Compatible with Glock® 19/23 Gen3 Components

Reviews

There are no reviews yet.

Be the first to review “P80 PF940C 80 Percent Compact Pistol Frame Kit – Black”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsP80 PF940C 80 Percent Compact Pistol Frame Kit – Black removeGlock® 17 Compatible Lower Parts Kit removeALPHAWOLF SLIDE G19 9MM GEN3, FEATURELESS removePolymer 80 PF940C Build Kit w/ Skeletonized Slide – Tungsten Gray removePolymer 80 PF940C Build Kit w/ Skeletonized Slide – Blue Titanium removePolymer 80 PF940C Build Kit w/ Skeletonized Slide – Black remove
ImageP80 PF940C 80 Percent Compact Pistol Frame KitPolymer 80Polymer-80-Build-Kit-w-Skeletonized-Slide-Blue-TitaniumPolymer 80
SKUG17LPKAW-SLIDE19-G3-Blank
Rating
Price $129.99$99.99$179.95 $449.99 $449.99 $449.99
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
Shipment Not Available to: California, Connecticut, District of Columbia, Hawaii, Maryland, Massachusetts, New Jersey, New York, Pennsylvania, Rhode Island, Washington

PF940C™ Compact Frame

PLEASE NOTE WHEN USING LONE WOLF DIST. COMPLETION PARTS, NOT ALL PARTS MAY BE GEN 3, YOU MUST USE GEN 3 ONLY, ANY OTHER PARTS INSTALLED MAY CAUSE DAMAGE AND WILL IMMEDIATELY VOID THE LIFETIME WARRANTY OF YOUR POLYMER80 PRODUCT. CHECK ALL COMPONENTS PRIOR TO INSTALLATION. POLYMER80, INC. IS NOT RESPONSIBLE FOR DAMAGES CAUSED BY INCORRECT PARTS INSTALLATION. Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. The frame comes with an aggressive texture that emulates a stippled pattern.  Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation. Product Overview:
  • Enhanced Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Aggressive and Adaptable Grip Texture
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Rear Rail Module (RRM™)
  • Hardened Pins for LBRS ™ and RRM™
  • Complete Finishing Jig, Drill bits
  • Compatible with Glock® 19/23 Gen3 Components

Description

So you wanna build a 3rd gen Glock® 17 compatible full-sized pistol. You got your Glock® 17 compatible 3rd gen full-sized frame, and now you need the guts to put in it to make it work. No need to scour every corner of the internet to Frankenstein something together. You can stop looking here and grab an entire OEM lower parts kit from us. Each part is easy to install, so you can get the bottom half of your creation up and running in no time. See below for more details.

What's Included:

  • Connector
  • Slide Stop Release with Spring
  • Locking Block Pin
  • Magazine Release (May be extended depending on inventory)
  • Magazine Release Spring
  • Slide Lock
  • Slide Lock Spring
  • Trigger Housing Pin
  • Trigger Housing with Ejector (may be from P80 depending on inventory)
  • Trigger Pin
  • Trigger Spring
  • Trigger with Trigger Bar (May be from P80 depending on inventory)
Please note: this kit does not include a frame, locking block, or magazine. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
Have you ever wondered what kind of paper Leonardo da Vinci used when he painted the Mona Lisa? No, of course not, it was simply in the background, providing a foundation for one of the greatest works of art of all time. Just like our AlphaWolf featureless slides. You can’t have a one of of a kind custom build without a starting point, and that’s where our slides form the canvas for your own Tactical Mona Lisa.  Features:
  • No profiling, serrations, or sight cuts. 
  • All internal machining complete
  • Shipped in the white
  • Made from 17-4 PH1150 stainless steel 
  • Made in the USA

Finishing Info:

  • Internal parts not included.
  • Barrel not included.
  • Sights not included.
Shipment Not Available to: California, Connecticut, District of Columbia, Hawaii, Maryland, Massachusetts, New Jersey, New York, Pennsylvania, Rhode Island, Washington

Description

This is a Polymer 80 Build Kit. Looking to build an awesome 9MM handgun? This is a Polymer 80 Complete Build Kit w Glock  Compatable Slide with RMR cut is a great self defense or range handgun. Highly customizable and comfortable. This kit includes: UPPER:
  • Glock 19 Compatible Slide w/ RMR cut
  • Glock Compatible 19 Upper Parts Kit
  • Glock Compatible 19 Guide Rod
  • 9MM 4″ Glock Compatible barrel
LOWER:
  • Polymer 80 PF940C™ 80% COMPACT PISTOL FRAME KIT
  • Polymer 80 PF940C Jig Kit + Drill Bits
  • Glock Compatible 19 Lower Parts Kit
Shipment Not Available to: California, Connecticut, District of Columbia, Hawaii, Maryland, Massachusetts, New Jersey, New York, Pennsylvania, Rhode Island, Washington

Description

This is a Polymer 80 Build Kit. Looking to build an awesome 9MM handgun? This is a Polymer 80 Complete Build Kit w Glock  Compatable Slide with RMR cut is a great self defense or range handgun. Highly customizable and comfortable. This kit includes: UPPER:
  • Glock 19 Compatible Slide w/ RMR cut
  • Glock Compatible 19 Upper Parts Kit
  • Glock Compatible 19 Guide Rod
  • 9MM 4″ Glock Compatible barrel
LOWER:
  • Polymer 80 PF940C™ 80% COMPACT PISTOL FRAME KIT
  • Polymer 80 PF940C Jig Kit + Drill Bits
  • Glock Compatible 19 Lower Parts Kit
Shipment Not Available to: California, Connecticut, District of Columbia, Hawaii, Maryland, Massachusetts, New Jersey, New York, Pennsylvania, Rhode Island, Washington

Description

This is a Polymer 80 Build Kit. Looking to build an awesome 9MM handgun? This is a Polymer 80 Complete Build Kit w Glock  Compatable Slide with RMR cut is a great self defense or range handgun. Highly customizable and comfortable. This kit includes: UPPER:
  • Glock 19 Compatible Slide w/ RMR cut
  • Glock Compatible 19 Upper Parts Kit
  • Glock Compatible 19 Guide Rod
  • 9MM 4″ Glock Compatible barrel
LOWER:
  • Polymer 80 PF940C™ 80% COMPACT PISTOL FRAME KIT
  • Polymer 80 PF940C Jig Kit + Drill Bits
  • Glock Compatible 19 Lower Parts Kit
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information