Sale!
In Stock

P80 PF940C 80 Percent Compact Pistol Frame Kit – FDE

$119.99

Category: Tag:

Description

Shipment Not Available to: California, Connecticut, District of Columbia, Hawaii, Maryland, Massachusetts, New Jersey, New York, Pennsylvania, Rhode Island, Washington

PF940C™ Compact Frame

PLEASE NOTE WHEN USING LONE WOLF DIST. COMPLETION PARTS, NOT ALL PARTS MAY BE GEN 3, YOU MUST USE GEN 3 ONLY, ANY OTHER PARTS INSTALLED MAY CAUSE DAMAGE AND WILL IMMEDIATELY VOID THE LIFETIME WARRANTY OF YOUR POLYMER80 PRODUCT. CHECK ALL COMPONENTS PRIOR TO INSTALLATION. POLYMER80, INC. IS NOT RESPONSIBLE FOR DAMAGES CAUSED BY INCORRECT PARTS INSTALLATION.

Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. The frame comes with an aggressive texture that emulates a stippled pattern.  Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation.

Product Overview:

  • Enhanced Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Aggressive and Adaptable Grip Texture
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Rear Rail Module (RRM™)
  • Hardened Pins for LBRS ™ and RRM™
  • Complete Finishing Jig, Drill bits
  • Compatible with Glock® 19/23 Gen3 Components

Reviews

There are no reviews yet.

Be the first to review “P80 PF940C 80 Percent Compact Pistol Frame Kit – FDE”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsP80 PF940C 80 Percent Compact Pistol Frame Kit – FDE removePolymer 80 PF940c removePolymer 80 Glock 19 PF940C 80% Compact Pistol Frame Kit removePistol Build Parts Kit w/ Front & Rear Serrated Slide (Glock® 17 Compatible) removePolymer 80 PF940C Build Kit w/ Skeletonized Slide – Tiffany Blue removeGlock 19 4″ Replacement Barrel – Parkerized remove
ImageP80 PF940C 80 Percent Compact Pistol Frame Kit – FDEPolymer 80 PF940CGlock-19 Barrel
SKUPF940C-BLK
Rating
Price $119.99 $489.99$109.99$209.97$449.99 $449.99 $69.99
Stock
Availability
Add to cart

Add to cart

Select options

Select options

Select options

Add to cart

Add to cart

Description
Content
Shipment Not Available to: California, Connecticut, District of Columbia, Hawaii, Maryland, Massachusetts, New Jersey, New York, Pennsylvania, Rhode Island, Washington

PF940C™ Compact Frame

PLEASE NOTE WHEN USING LONE WOLF DIST. COMPLETION PARTS, NOT ALL PARTS MAY BE GEN 3, YOU MUST USE GEN 3 ONLY, ANY OTHER PARTS INSTALLED MAY CAUSE DAMAGE AND WILL IMMEDIATELY VOID THE LIFETIME WARRANTY OF YOUR POLYMER80 PRODUCT. CHECK ALL COMPONENTS PRIOR TO INSTALLATION. POLYMER80, INC. IS NOT RESPONSIBLE FOR DAMAGES CAUSED BY INCORRECT PARTS INSTALLATION. Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. The frame comes with an aggressive texture that emulates a stippled pattern.  Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation. Product Overview:
  • Enhanced Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Aggressive and Adaptable Grip Texture
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Rear Rail Module (RRM™)
  • Hardened Pins for LBRS ™ and RRM™
  • Complete Finishing Jig, Drill bits
  • Compatible with Glock® 19/23 Gen3 Components

Description

Polymer 80 PF940c Completion Kit

The polymer 80 compact pistol polymer 80 PF940c kit is designed to replace the frame of a compact size Glock 19 or Glock 23. This 80% frame is compatible with Glock Gen 3 G19 & G23 components. We guarantee you will find the parts you need in our diverse product inventory. Whether you need a polymer 80 PF940c frame kit or a single jig tool, JSD Supply can help. We’ll walk you through the process of building a handgun in your garage that looks, feels, and operates just like one from the manufacturer.

We Make Your Build Easy

Our polymer 80 PF940c kit is easy to complete and we’ve even included the jig and bits. A drill and files will be needed, however, your personal build can be made even easier with the use of a Dremel, C-clamps, and end snips. Each frame kit includes the following:
  • Polymer 80 PF940c Compact Frame
  • Jig
  • Custom locking block with side rail
  • Rear Slide Rail
  • Drill bits
PLEASE ORDER ALL 80% RECEIVERS AS THEIR OWN ORDER TO ENSURE YOU RECEIVE IT BEFORE ANY *POTENTIAL* LEGISLATIOIN CHANGES. You can complement your PF940c completion kit with our PF940c Full Build Kit. This is the other parts kit needed to complete a polymer 80 PF940c frame. We provide all the tools and advice necessary to help make your build an enjoyable project.

We Provide The Parts And Guide You Through The Process

For handguns without the hassle, JSD Supply has been your go-to DIY parts supplier since 2013. Bypass the inconvenience of buying firearms through a retail supplier and have them delivered to your doorstep, as long as it’s legal where you live. Our dedicated team inspects every part before shipping it. Not only will you know you are getting the best components available on the market, but they are also backed by our excellent customer support. Shop by brand for other great products just like the PF940c completion kit.

The Polymer 80 Compact Pistol Frame PF940C kit is designed to replace the frame of a compact size Glock pistol such as the Glock 19 or 23. It can be built for either 9mm luger or 40 S&W caliber with only a few parts difference. The kit is easy to complete with the jig and bits included. The only required tools are a drill and files. However, this process is made easier with the use of a few extra tools: dremel, end snips and C-Clamps. See the video in the picture section above for more details.

Works with Generation 1 - 3 Glock Compatible Parts. Product Overview:
  • Enhanced Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Aggressive Grip Texture
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Rear Rail Module (RRM™)
  • Hardened Pins for LBRS ™ and RRM™
  • Complete Finishing Jig and Drill bits Included
  • Compatible with Glock® 19/23 Gen3 Components

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Rockeybrass.com is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H. DISCLAIMER: We do not provide legal advice or legal counsel. It is your responsibility to understand the respective State laws and Federal laws. This product is to be installed by a competent gunsmith. No liability is expressed or implied for damage or injury which may result from installation or use of this product. These frames require milling and possibly fitment of the various parts included. We do not provide build and/or gunsmithing advice. All issues and warranty for the Polymer 80 frames are handled by Polymer 80 directly. Due to the legal nature of these kits, we do not accept returns or exchanges on these frame kits for any reason. Please note that we cannot ship these to the state of New Jersey or DC. Washington state residents will need to provide a copy or photo of their Drivers License and Concealed Pistol License prior to shipping.

Description

Got your own Glock® 17 frame or Polymer80 mid-size frame but need to revamp, restore, or just give it a fresh look? Then check out this slide and parts kit. This sucker's like our Glock® 17 (gen 3)-compatible build kit but without the 80% frame and necessary jig and tooling. If you've got a fabricated frame, here's your final assembly kit. Breathe some life into your gen 3 Glock® 17 or completed G17-compatible 80% frame with this slide, barrel and parts kit.

Front and Rear Serration Slide:

The included front- and rear-cut slide allows for quick and easy completion of your 80% full-sized pistol build with a serrated, customized, high-quality slide. Wrap-around serrations allow for easy handling and control, while a 416 stainless steel billet construction features machining to factory specifications.
  • Front- and rear-cut slide serrations
  • Heat treated to 41-44 on the Rockwell C scale
  • Matte black nitride finish
  • OEM internal dimensions
  • OEM Glock®-compatible sight cuts
  • For Gen3 pistols

Choose Your Barrel:

Made with proper US craftsmanship, these Gen3 barrel boasts the highest level of quality and accuracy you’ll ever find in any full-sized pistol. Manufactured from heat-treated 416R stainless, these Gen3 barrels will guarantee consistent shop shot groups and accuracy when it counts most.
  •         Rifled with 1:10 rate of twist
  •         Includes 11-degree target crown
  •         Features nitride-treated finish (black option)

Barrel Options:

  • Option 1: Black Nitride
  • Option 2: Stainless Steel Fluted

Includes Top-of-the-line Accessories

This kit includes the accessories and components you need to complete a frame and hit the range. This kit is compatible with Gen3 Glock® 17 components for further customization. These are the accessories included:
  •         OEM-spec slide parts kit
  •         OEM-spec frame parts kit
  •         OEM-spec Gen3 Spring and guide rod
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
Shipment Not Available to: California, Connecticut, District of Columbia, Hawaii, Maryland, Massachusetts, New Jersey, New York, Pennsylvania, Rhode Island, Washington

Description

This is a Polymer 80 Build Kit. Looking to build an awesome 9MM handgun? This is a Polymer 80 Complete Build Kit w Glock  Compatable Slide with RMR cut is a great self defense or range handgun. Highly customizable and comfortable. This kit includes: UPPER:
  • Glock 19 Compatible Slide w/ RMR cut
  • Glock Compatible 19 Upper Parts Kit
  • Glock Compatible 19 Guide Rod
  • 9MM 4″ Glock Compatible barrel
LOWER:
  • Polymer 80 PF940C™ 80% COMPACT PISTOL FRAME KIT
  • Polymer 80 PF940C Jig Kit + Drill Bits
  • Glock Compatible 19 Lower Parts Kit

Description

Introducing the Glock 19  Barrel. This barrel is a drop-in fit for the factory Glock 19.
  • 4150 Black Parkerized Barrel
  • 1:16 Twist
  • 9 MM Caliber
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Color

Black, FDE, Gray, OD Green

Color *

Black, FDE, Grey, OD Green, Blue Titanium, Cobalt

Add Frame Parts Kit

None, Rockey Brass Frame Parts Kit (+$49.99)

Add Holster

None, Adaptive IWB Holster for PF940C Right Handed (+$49.99), Adaptive IWB Holster for PF940C Left Handed (+$49.99)

Choose Barrel Finish:

Black Nitride, Stainless Steel