In Stock

SS80 80% LOWER

$129.99

Now is your best time to purchase the SS80 lower.

Federal law states that you can build a firearm for personal use. This law has been in effect for years, but one knows when, or if, it will be changed or repealed.

This do-it-yourself frame accepts Glock 43 factory parts.

The SS80 is the best lower available. In fact, at this time, it is the only 80% lower available that accept G43 parts. It is a very high quality polymer frame.

There are a lot of reasons to purchase an 80% lower. We are here to support your choice with the information and parts you need to make it a reality.

Return Policy: Due to the unique nature of this item, the SS80 lower is non-refundable once it has been modified in any way.

SKU: N/A Categories: ,

Description

Pending U.S Legislation seeks to effectively outlaw the building of 80% Lowers. For more information, click HERE to read the proposed bill. —

PLEASE NOTE: We can no longer ship 80% Lowers to California, Connecticut, New Jersey, Washington State, New York State, or Hawaii.

The SS80 80% Lower is sold as a separate item. To complete the lower you will also need the purchase the SS80 Builders Tool Set found here.

Here’s the brand new 80% Lower that you’ve been waiting for… the build-your-own Single Stack 80% Lower that you complete with Glock 43 parts.

The NEW SS80 Single Stack 80% Lower is now the best 80% lower on the market. This new version is not only new but improved in design and materials!

Based on the customer feedback and months of research and development, the SS80 is made with a much stronger and more durable nylon/polymer blend that is similar to the original 43 but actually dampens felt recoil and provides even better reliability.

You’ll notice the grip texture immediately. It provides a rock solid grip that feels good and is strikingly attractive. The frame is shaped with a double trigger undercut that allows you to get a higher grip on the gun, which reduces felt recoil and improves speed and accuracy.

As with all 80% Lowers, at this time there is no serial number, however a serial plate is embedded in the polymer to allow you to serialize it once completed.

The SS80 is compatible with parts designed for the Glock 43.

Click HERE to read the ATF Determination Letter.

Please Note: This is the SS80 Single Stack Frame Blank (aka 80% Lower) ONLY. It does not include any of the parts or tools required to complete the lower. We carry an SS80 Builders Tool Set found here which includes the tools necessary to finish the lower. The SS80 Single Stack 80% Lower is ONLY compatible with factory and aftermarket Glock 43 parts.

Also Note: For your convenience, the SS80 Builder’s Tool Set now comes with a pre-drilled Locking Block. The product shown in the video is an earlier version that required additional drilling, however you can skip this step with current and future versions of the SS80 Locking Block.

Return Policy: Due to the unique nature of this item, the SS80 lower is non-refundable once it has been modified in any way.

Looking for a Complete Upper to finish your build?
Click Here

Need a Lower Parts Kit for your frame?
Click Here

Want to spruce up your Build with Stainless Steel Pins?
Click Here

Additional information

SELECT COLOR:

FLAT DARK EARTH, MAHOGANY, SAND, TACTICAL GREY

Reviews

There are no reviews yet.

Be the first to review “SS80 80% LOWER”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSS80 80% LOWER removePF940SC™ 80% SUBCOMPACT FRAME KIT - BLACK removeG43 Zaffiri Precision Black Ported Cut Slide Built Stainless Steel Slide - OEM Sights - Tin Gold TB removePF940C™ 80% COMPACT PISTOL FRAME KIT - GRAY removeG43 Zaffiri Precision Black Ported Cut Slide Built Stainless Steel Slide - OEM Sights - Black Barrel removePF9SS 80% SINGLE STACK PISTOL FRAME KIT-BLACK remove
ImagePlaceholderPlaceholderPlaceholder
SKUP80-PF940SC-BLK-Kit-DNUP80-PF940Cv1-GRY-Kit-DNUP80-PF9SS-BLK-Kit-DNU
Rating
Price$129.99$160.00$734.99$160.00$734.99$149.99
Stock

Out of stock

AvailabilityOut of stock
Add to cart

Select options

Add to cart

Add to cart

Add to cart

Add to cart

Read more

DescriptionNow is your best time to purchase the SS80 lower. Federal law states that you can build a firearm for personal use. This law has been in effect for years, but one knows when, or if, it will be changed or repealed. This do-it-yourself frame accepts Glock 43 factory parts. The SS80 is the best lower available. In fact, at this time, it is the only 80% lower available that accept G43 parts. It is a very high quality polymer frame. There are a lot of reasons to purchase an 80% lower. We are here to support your choice with the information and parts you need to make it a reality. Return Policy: Due to the unique nature of this item, the SS80 lower is non-refundable once it has been modified in any way.
ContentPending U.S Legislation seeks to effectively outlaw the building of 80% Lowers. For more information, click HERE to read the proposed bill. — PLEASE NOTE: We can no longer ship 80% Lowers to California, Connecticut, New Jersey, Washington State, New York State, or Hawaii. The SS80 80% Lower is sold as a separate item. To complete the lower you will also need the purchase the SS80 Builders Tool Set found here. Here's the brand new 80% Lower that you've been waiting for… the build-your-own Single Stack 80% Lower that you complete with Glock 43 parts. The NEW SS80 Single Stack 80% Lower is now the best 80% lower on the market. This new version is not only new but improved in design and materials! Based on the customer feedback and months of research and development, the SS80 is made with a much stronger and more durable nylon/polymer blend that is similar to the original 43 but actually dampens felt recoil and provides even better reliability. You'll notice the grip texture immediately. It provides a rock solid grip that feels good and is strikingly attractive. The frame is shaped with a double trigger undercut that allows you to get a higher grip on the gun, which reduces felt recoil and improves speed and accuracy. As with all 80% Lowers, at this time there is no serial number, however a serial plate is embedded in the polymer to allow you to serialize it once completed. The SS80 is compatible with parts designed for the Glock 43. Click HERE to read the ATF Determination Letter. Please Note: This is the SS80 Single Stack Frame Blank (aka 80% Lower) ONLY. It does not include any of the parts or tools required to complete the lower. We carry an SS80 Builders Tool Set found here which includes the tools necessary to finish the lower. The SS80 Single Stack 80% Lower is ONLY compatible with factory and aftermarket Glock 43 parts. Also Note: For your convenience, the SS80 Builder's Tool Set now comes with a pre-drilled Locking Block. The product shown in the video is an earlier version that required additional drilling, however you can skip this step with current and future versions of the SS80 Locking Block. Return Policy: Due to the unique nature of this item, the SS80 lower is non-refundable once it has been modified in any way. Looking for a Complete Upper to finish your build? Click Here Need a Lower Parts Kit for your frame? Click Here Want to spruce up your Build with Stainless Steel Pins? Click HerePLEASE NOTE WHEN USING LONE WOLF DIST. COMPLETION PARTS, NOT ALL PARTS MAY BE GEN 3, YOU MUST USE GEN 3 ONLY, ANY OTHER PARTS INSTALLED MAY CAUSE DAMAGE AND WILL IMMEDIATELY VOID THE LIFETIME WARRANTY OF YOUR POLYMER80 PRODUCT. CHECK ALL COMPONENTS PRIOR TO INSTALLATION. POLYMER80, INC. IS NOT RESPONSIBLE FOR DAMAGES CAUSED BY INCORRECT PARTS INSTALLATION.   The next installment in the PF-Series™ has arrived. The industry’s only 80% Subcompact Polymer Pistol Frame offers a new generation of ergonomics and features. Built with high-strength reinforced polymer construction, the PF940SC™ It is available with our aggressive standard grip texture The kit includes:
  • 80% Polymer Pistol Frame
  • Polymer Jig
  • Locking Block Rail System and Rear Rail Module
  • Drill Bits
Available colors: Black, Flat Dark Earth, OD Green, Gray, Cobalt
Product Details
G43 Zaffiri Precision Ported Cut Slide Built Stainless Steel Slide - OEM Sights - Tin Gold TB Zaffiri Precision Ported Cut Stainless Steel Slides were designed with tight tolerances to increase accuracy and performance. These are among the best aftermarket slides available for Glock. Built around the Glock 43 and 43X frame. Easy to install and machined from Billet Stainless Steel then coated Black, these slides are a great addition to anyone’s Glock collection.
  • Ported Cut Slide
  • Machined from 17-4 Stainless Steel
  • OEM Sights
  • Slide Build Kit
  • Tin Gold TB
  • Slide Come Built
  • G43 Lower Parts Kit

PF940C™ Compact Frame

  PLEASE NOTE WHEN USING LONE WOLF DIST. COMPLETION PARTS, NOT ALL PARTS MAY BE GEN 3, YOU MUST USE GEN 3 ONLY, ANY OTHER PARTS INSTALLED MAY CAUSE DAMAGE AND WILL IMMEDIATELY VOID THE LIFETIME WARRANTY OF YOUR POLYMER80 PRODUCT. CHECK ALL COMPONENTS PRIOR TO INSTALLATION. POLYMER80, INC. IS NOT RESPONSIBLE FOR DAMAGES CAUSED BY INCORRECT PARTS INSTALLATION.   Polymer80 is pleased to present the PF940C™ 80% Compact Pistol Frame. Offering compatibility with Glock® 19/23 Gen3 components, the PF940C™ is an industry first. The frame comes with an aggressive texture that emulates a stippled pattern.  Features like the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation. Product Overview:
  • Enhanced Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Aggressive and Adaptable Grip Texture
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Rear Rail Module (RRM™)
  • Hardened Pins for LBRS ™ and RRM™
  • Complete Finishing Jig, Drill bits
  • Compatible with Glock® 19/23 Gen3 Components
  • Patent Available
Product Details
G43 Zaffiri Precision Ported Cut Slide Built Stainless Steel Slide - OEM Sights - Black TB Zaffiri Precision Ported Cut Stainless Steel Slides were designed with tight tolerances to increase accuracy and performance. These are among the best aftermarket slides available for Glock. Built around the Glock 43 and 43X frame. Easy to install and machined from Billet Stainless Steel then coated Black, these slides are a great addition to anyone’s Glock collection.
  • Ported Cut Slide
  • Machined from 17-4 Stainless Steel
  • OEM Sights
  • Slide Build Kit
  • Black TB
  • Built Slide
  • G43 Lower Parts Kit
PF9SS™ Single Stack Frame Polymer80 is pleased to present the PF9SS™ 80% Subcompact Single Stack Frame. Offering compatibility with Glock® 43 Gen4 components, the PF9SS™ frame comes with an aggressive texture that emulates a stippled pattern, an extended beaver tail, double undercut trigger guard, and a thumb ledge.  These features considerably enhance the ergonomics allowing for an effective grip and improved recoil mitigation. The PF9SS™ is a perfect build for “Everyday Carry” and comes with an embedded metal plate for those that wish to serialize their completed pistols. Product Overview:
  • Enhanced Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Aggressive and Adaptable Grip Texture
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Rear Rail Module (RRM™)
  • Hardened Pins for LBRS ™ and RRM™
  • Complete Finishing Jig and Drill Bits are included
  • Compatible with Gen 4 Glock® G43 Slide Assemblies
  • Compatible with Glock® G43 Magazines
  • Available in Black, with other colors arriving soon.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
SELECT COLOR:

FLAT DARK EARTH, MAHOGANY, SAND, TACTICAL GREY