In Stock

SS80 80% Single Stack Compact Pistol Frame Only (Glock® 43 Compatible) – Black

$124.99

Description

Ready to build a custom, upgraded pistol that’s compatible with the Glock 43? The SS80 80% Frame provides the perfect platform for piecing together a single-stack shooter that works with all OEM and aftermarket G43 components. It features some unique upgrades, too: A new polymer construction is tougher than the factory frame, yet it provides reduced felt recoil. Enhanced grip textures and an undercut trigger guard provide better comfort, too.

Making the frame ready for assembly is easy with the SS80 Jig and Tool Kit. The kit provides easy-to-follow instructions for first-time builders, and all machining operations can be completed with basic hand tools.

Features & Specs

  • Compatible with OEM and aftermarket G43 parts
  • Cut and drilled with simple hand tools for assembly
  • NO FFL required – ships directly to your front door
  • Upgraded polymer is tougher yet dampens recoil
  • New grip texture, double-undercut guard for comfort

Completing Your SS80 Frame

The Jig and Tool Kit includes the 80% jig for fabrication and the required drill bits. Also included is a factory-spec locking block rail system, extended trigger housing pin, and rear rail system. The new locking block also ships pre-drilled, requiring even less machining time.

NOTE: The SS80 Jig and Tool Kit is required for fabrication and assembly. ATF has determined the tool kit and 80% frame must be purchased and shipped separately. For additional details, you may read the ATF’sDetermination Letter.

Reviews

There are no reviews yet.

Be the first to review “SS80 80% Single Stack Compact Pistol Frame Only (Glock® 43 Compatible) – Black”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSS80 80% Single Stack Compact Pistol Frame Only (Glock® 43 Compatible) - Black removePolymer80 RL556v3™ 80% Lower Receiver and Jig Kit (AR-15) - Black removePACKAGED AM-15 80% LOWER RECEIVER, UNFINISHED, OPEN TRIGGER removeBlack .308 80% Lower Billet Fire/Safe Engraved (1-Count) removePolymer80 80% Lower Receiver and Jig Kit (LR-308) removePremium JTE 80% Lower Receiver - Black Anodized - No LOGO remove
Image
SKUP80-RL556v3-BLKD2-K067-U000-0PL308A-EP80-308KIT-BLK
Rating
Price$124.99$79.99$48.29$119.99$75.00 $69.99
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.
DISCLAIMER: At U.S. PATRIOT ARMORY, we by no means provide legal advice or legal counsel. Every builder needs to research their respective City, State and Federal laws in the area they are ordering from. We DO NOT provide gunsmithing advice. U.S. PATRIOT ARMORY is not responsible for improper builds, damage or injury due to user error. * Our products are not sold or shipped to residents of New Jersey WILL NOT SHIP 80% Lowers to the following areas: NAVADA, WASHINGTON DC, WASHINGTON, RHODE ISLAND, DELAWARE, NEW YORK, MASSACHUSETTS, CONNECTICUT, NEW JERSEY, HAWAII, MONTGOMERY COUNTY-MD, PHILADELPHIA-PA, SACRAMENTO-CA, SAN FRANSISCO-CA and LOS ANGELES-CA
ContentReady to build a custom, upgraded pistol that’s compatible with the Glock 43? The SS80 80% Frame provides the perfect platform for piecing together a single-stack shooter that works with all OEM and aftermarket G43 components. It features some unique upgrades, too: A new polymer construction is tougher than the factory frame, yet it provides reduced felt recoil. Enhanced grip textures and an undercut trigger guard provide better comfort, too. Making the frame ready for assembly is easy with the SS80 Jig and Tool Kit. The kit provides easy-to-follow instructions for first-time builders, and all machining operations can be completed with basic hand tools.

Features & Specs

  • Compatible with OEM and aftermarket G43 parts
  • Cut and drilled with simple hand tools for assembly
  • NO FFL required - ships directly to your front door
  • Upgraded polymer is tougher yet dampens recoil
  • New grip texture, double-undercut guard for comfort

Completing Your SS80 Frame

The Jig and Tool Kit includes the 80% jig for fabrication and the required drill bits. Also included is a factory-spec locking block rail system, extended trigger housing pin, and rear rail system. The new locking block also ships pre-drilled, requiring even less machining time. NOTE: The SS80 Jig and Tool Kit is required for fabrication and assembly. ATF has determined the tool kit and 80% frame must be purchased and shipped separately. For additional details, you may read the ATF’sDetermination Letter.

Description

Keep your AR build "light in the lower" while retaining its strength and integrity with the RL556v3 by Polymer80. This polymer made 80% lower receiver features a solid core design, flared magwell, and beefier mil-spec buffer tube housing to ensure your AR can take everyday wear and tear. For instructions on using the 80% Lower Receiver Jig, click here.

The RL556v3 Kit Includes:

  • 80% Polymer AR15 Lower Receiver (Mil-spec)
  • Polymer Jig
  • Trigger Hole Drill Guide
  • Drill Bits and End Mill

Why a Polymer AR-15 80% Lower?

Polymer 80% lowers have been well-tested and proven among the AR-15 and 80% lower community. This ultralight lower affords the same ruggedness as any aluminum lower, yet its construction also affords many unique benefits. If you’re nervous about machining an 80% lower, this polymer lower will be the perfect way to ease into the practice. Polymer is incredibly simple to drill and mill, and the material is forgiving.
Made in the USA Lifetime Warranty
AM-15 80% Lower Receiver, Unfinished, Open Trigger No FFL is required to purchase this item. California requires 80% Receivers to be serialized before fabrication. California residents must submit to a background before building. Other states have banned the sale, ownership, manufacture, and use of 80% Receivers. Because of changing firearm laws, this list may not be all-inclusive. The following are the states that have banned 80% receivers: NJ, NY, CT, HI, DC and RI.

Description

Grab this billet, .308-chambered 80 percent lower to complete your own LR-308 build at home! CNC-machined right here in the U.S.A and backed by a Lifetime Warranty. This lower's compatible with DPMS Gen 1 and CMMG Mk3 .308 components.

LR-308 80 Percent Lower Features:

  • Integrated, one-piece trigger guard
  • Broached magwell for faster reloads
  • 100% Made in the USA
  • Lifetime Warranty
  • No FFL required

Specifications:

  • Caliber: .308 Winchester/7.62x51mm NATO
  • Construction: Billet 6061 T6 aluminum
  • Magazine: DPMS Gen 1/SR-25
  • Finish: Type III Hardcoat anodized
  • Engraving: "FIRE", "SAFE"
  • Buffer: Mil-spec

Parts Compatibility:

  • Upper: DPMS Gen 1, CMMG Mk3
  • Parts Kit: DPMS Gen 1, CMMG Mk3
  • Magazine: DPMS Gen 1, SR-5

Jig Compatibility

This LR-308 80% lower is not compatible with .308 80% lowers jigs from other manufacturers. This lower is compatible with the Elite Builder 308 Jig and Router Jigs. No FFL is required to purchase this 80 percent lower. This .308 80% lower receiver is not considered a firearm and is compliant with the Gun Control Act of 1968. Not classified as a firearm as defined in 18 U.S.C. 921(a)(3).

Description

Polymer80 has attacked the AR-10 80% lower with a new, ultralight approach! Introducing the Warrhogg .308 AR-10 Polymer 80% lower, the world’s lightest DPMS-platform .308 lower on the market. This new contender addresses a big problem for AR-15s chambered in .308, and that’s weight. Lightweight and maneuvrability have always plagued the AR-10 and .308 AR-15 platform, until now. Weighing less than half a pound, the Warrhogg .308 80% lower promises to change the game – but is it strong enough? Made from weapons-grade polymer! The Warrhogg AR-10 80% lower is constructed from the same reinforced material that all current-production, off-the-shelf polymer firearms are built from. Polymer80 took the same to repeatedly test and re-develop their polymer lowers until they achieved a unit capable of handling thousands of rounds without failure. The Warrhogg comes reinforced, ready for battle! The Warrhogg .308 lower features plenty of reinforcements based on real testing to guarantee reliability. Polymer80 beefed up the buffer tube ring, reinforced the receiver with a solid core, added ribbing across the entire top surface, and developed a no-thread pistol grip mount. Lastly, the mag well has been stiffened, all while retaining a featherweight profile. For instructions on the Warrhogg, click here.

Warrhogg .308 AR-10 Polymer 80% Lower features:

  •         Weighs less than half a pound!
  •         Includes 80% lower jig
  •         Includes all necessary tooling
  •         Includes pistol grip nut and screw
  •         Reinforced Polymer Construction
  •         Integrated trigger guard
  •         Gripped mag well for ergonomics
  •         Compatible with all 80% lower Jigs
  •         Compatible with DPM Gen 1 Lower Parts Kit
Made in the USA Lifetime Warranty
AR-15 JTE 80% LOWER RECEIVER - BLACK ANODIZED - NO LOGO
  • Type 3 Black Anodized or raw finish.
  • T6 Heat-Treated 6061 Billet Aluminum
  • Completed weight: 8 ounces
  • Integral winter trigger-guard for added strength
  • Flared magwell to improve mag changes.
  • Broached magwell
  • Lifetime warranty against manufacture defects
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information