| Content | For our customers who want it all - this is your kit! Purchase everything you'll need from us to quickly and easily finish AR-15 and AR-308 80% Lower Receivers.
A complete breakdown of what's included in the Freedom Kit:
The Router Jig PRO
(1)Ā Universal AR-15, AR-9, .308 and AR-10 Multiplatform Jig
AR-15 Billet 6061-T6 80% Lower Receiver:
(1) 5D Tactical BilletĀ AR-15 80% Lower ReceiverĀ - FIRE/SAFE Engraved - Type III Black Anodized Finish
AR-308 Billet 6061-T6 80% Lower Receiver:
(1) 5D TacticalĀ AR-308 Lower 80% ReceiverĀ - FIRE/SAFE Engraved - Type III Black Anodized Finish
Pro Jig Tool KitĀ (Select the ReadyMILLā¢ sizeĀ required for your router by referencing the chart below):
(1) 5D Tactical ReadyMILLā¢
(1) 3/8" HSS Black and Gold Drill Bit
(1) 21/64" HSS Black and Gold Drill Bit
(1) 5/32" HSS Black and Gold Drill Bit
DĀ (Requires Full-Size Router Plate -Ā Buy Here)
United States Patent #9,982,958
Other Patents Pending | NOTE: This 80% Lower Jig comes with the regular router plate as seen in the picture.
The patented Easy JigĀ® Gen 2Ā is the world's easiest to use,Ā fully universal, 80% lowerĀ jig capable of finishing AR-15, AR-9, and AR-45 lowers. Easy JigĀ® Gen 2 is the culmination of our years of experience gained from manufacturing the worldās first router jig and the best selling 80% lower jig in history, the Easy JigĀ® Gen 1.
We thought through every possible detail to improve the user experience with Easy JigĀ® Gen 2 and took into account hundreds of suggestions from our customers. No detail was too small to be overlooked. The result is quite simply the finest 80% lower jig ever produced. This may not be the absolute cheapest jig on the market, but it is arguably theĀ very best. We invite side by side comparison to any other 80% lower jig on the market, nothing else compares.
Our AR-15 / AR-9 only version of Easy JigĀ® Gen 2 hasĀ all the amazing features of theĀ Easy JigĀ® Gen 2 Multi-Platform, except it does notĀ fit .308 lowers. If you want to complete AR-15, AR-9, and .308 in the same jig, Easy JigĀ® Gen 2 Multi-Platform is the best choice. The AR-15 / AR-9 only jig cannot be retrofitted to accommodate .308 lowers.
Click here to viewĀ Easy JigĀ® Gen 2 Multi-Platform,Ā our combined AR-15 / AR-9 / .308 jig.
New!Ā Optional Hardened Steel Hand Drill Stabilizersā¢Ā provide extra stability when using a hand drill instead of a drill press. Hand Drill Stabilizersā¢Ā are recommended although not required when using a hand drill. You can watch a short video about this exclusive feature and purchase them byĀ clicking here.
Universal
- Fits all known AR-15, AR-9, andĀ AR-45 Designs
- Self-centering mechanism ensures perfectionĀ even with exoticĀ billet lower designs
- Tested to work with over 23 of the most common handheld routers
- The only jig that works with full-size routers.
Click to viewĀ list of compatible routers.
Fast
- Less drilling, drill only 1 hole prior to milling
- Worldās fastest jig, can complete an 80% lower in under 30 min
- Jig requires no disassembly to insert or remove 80% lower
- 80% lowers can be inserted or removed in under 10 seconds
Easy
- Built-in measuring gauges. No measuring tools needed
- No drill press needed, only a hand drill and handheld router
- Included Shop Vac Attachment means less mess!
- Includes detailed manual, quick start guide, and video tutorial download
Durable
- End mill never makes contact with jig, no wear surfaces
- End mill supported by premium quality bearing with extended service life
- No reportedĀ bearing failures out of thousands of jigs sold
- Drill blockĀ made with hardened steel
- Solid Steel 3/4 inch thick side plates
- Jig weighs over 7 pounds
Note: Tool kit and 80% lower not included.
80% Lower ReplacementĀ Program: In the remote chance you make a mistake while using an 80% Arms Jig that damages your 80% Arms lower, we will replace your lower at a 50% discount off of the list price.
Made in USA | This Elite Builder 80% Lower Jig is compatible with ourĀ Forged 80% LowersĀ and ourĀ Premium Fire/Safe Marked Billet 80% Lowers!Other manufacturer's billet 80% lowers may be compatible with this 80% lower jig, provided their lower receiver design adheres to mil-spec specifications.
The fast, accurate, bombproof 80% Lower Jig from Elite Builder now ships with equally high-quality drill bits and end
mill bits. This gunsmithing combo kit allows you to confidently cut and drill multiple AR-15 and AR-9 80% lower receivers without losing speed or accuracy. Hardened steel template plates and a self-aligning design make machining quick and free of guesswork. Thanks to its reinforced design, the Elite Builder jig can reliably handle any polymer, billet, or forged 80% lower with a standard (mil-spec) configuration.
You can also now choose to include the enhanced drill plate to further make it easier for you to drill and hollow out your fire control group pocket.
PLEASE NOTE:Ā Tooling for this jig is optional. You'll need to select whether you would like accompanying tooling with your jig.
See the Elite Builder Jig's instructions here!
Drill Bits & End Mill Bits Included
To make cutting and drilling as quick and easy as possible, Elite Builder included HSS bits: High-speed steel bits designed specially for gunsmithing and machining aluminium firearm receivers. The tool kit includes:
- (1) ā
Drill Bit - 5ā
- (1) 5/32 Drill Bit - 3ā
- (1) ā
Short End Mill - 3ā
- (1) 5/16 Short End Mill - 4ā
- (1) ā
Long End Mill - 4ā
Jig Features & Specs:
- Self-aligning jig requires no special fitting during setup
- Compatible with any standard AR-15 or AR-9 80% lower
- Black anodized finish protects against rust and corrosion
- Pre-drilled holes for hammer, trigger, and safety pin holes
- Reinforced steel template plates for completing multiple lowers
*Important - This jig was designed with a drill press in mind for completing your 80% lower and is not designed to be used with a router/laminate trimmer.
Shipping Restrictions
AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etcā¦) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibilityĀ to be aware of your local firearms laws before purchasing from our website. We try our best to keep ourĀ shipping pageĀ current, but laws change daily. | This jig is compatible with ourĀ Forged 80% Lowers.Ā OurĀ Premium Fire/Safe Marked Billet 80% LowersĀ are not compatible with this 80% lower jig. Other manufacturer's billet 80% lowers may compatible with this 80% lower jig, provided their lower receiver design adheres to mil-spec specifications.
Looking for the perfect affordable alternative to the expensive and more complicated metal jigs? Youāve come to the right place! This low-cost 80 lower jig by Polymer80 is a perfect choice, especially if youāre just planning on finishing a few AR15 or AR9 80 lowers. Why pay more, right?
The Polymer80 RJ556U AR15/AR9 Universal Jig is an excellent addition to the very popularĀ Polymer80Ā line. This Polymer80 jig wasnāt only designed for polymer lowers in mind. This 80 lower jig was created for compatibility withĀ all mil-specĀ 80% AR15 lower receiversĀ andĀ AR9 80 lowers, whether they areĀ polymer OR metal. The Polymer80 AR15 Universal Jig is designed with a super rigid long-fiber nylon composite, which will allow you to utilize the 80% lower jig up to 3 times.
TheĀ Polymer80 RJ556U AR15/AR9 Universal Jig is designed to provide a stable platform for milling, and therefore encompasses the entire AR15 or AR9 lower receiver. Other competing 80 lower jigs are typically more expensive and difficult to secure the 80 lower in the vise and more likely to damage the 80 lower receiver while milling.
The Polymer80 P80RJ556U AR15/AR9 Universal Jig includes:
- 2 sided jig
- 3 trigger guides
- 9mm HSS end mill
- 5/16ths drill bit
- 3/8ths drill bit
- 5/32nd drill bit
Example Tools Needed:
Extremely expensive or high-end tools are not required to use this jig to finish your lower.Ā All of the suggested tools mentioned below can be utilized for other popularĀ Polymer80Ā receiver projects, including .308 80 lower receivers and 80% GlockĀ® compatible pistol frames, so itās easy to justify the expense!
- Vise For Drill Press - 6ā inch jaws
- Drill Press -1850-2250 RPM
- Digital Calipers
- Dremel Bit #9904
- Level
- Round Machinists File
- Non-marring vice jaws
- Lower Receiver Vice Block
- Upper Receiver Vice Block
The complete list of suggested tools can also be found in theĀ instruction guide
What are you waiting for?Ā Your build awaits! | The Easy JigĀ® Gen 1 is a patented AR-308 80% lower jig that makes machining your 80% lower receiver easier, faster, and safer.Ā Lower receivers finished with the .308 Easy Jig have a better finish and hold tolerances that could not be achieved using any other jig on the market today.Ā You do not need to own a drill press or mill to use the Easy JigĀ®. Ā It truly makes finishing your lower receiver a simple process. On top of all this, itās extremely durable and can be reused for dozens of lowers. This product is proudly made in USA.
Fully compatibleĀ with ourĀ Black Anodized,Ā Flat Dark Earth (FDE), orĀ Raw 308 lowers.Ā
TheĀ Easy Jig Gen 1 isĀ NOTĀ compatible with all other brands of .308Ā lowers. If you want full universal compatibility, please see ourĀ Gen 2 Easy Jig.Ā
Easy Jig highlights:
- Easier
- Built in drill/end-mill depth gauge for the trigger and rear-shelf pockets
- Eliminates the need for expensive measurement tools
- Quick verification of depth setting ā eliminates slippage issues that can ruin parts
- Eliminates constant measuring to determine depth while milling
- Safer
- End-mill downward force canāt separate the drill press taper chuck
- It is safer to move router by hand than to move the jig around on a drill press
- Uses Common Hand Tools
- The .308 Easy Jig is designed to hold tolerances using a common hand-drill
- No drill press is required, milling is done with a router
- Routers are much more portable than a drill press, easily borrowed from a friend
- Routers are made for cutting pockets using a template
- Routers are cheaper than a drill press.
- Faster
- Pocket drilling requires 10 holes drilled once ā Traditional jigs require 42 holes to be drilled once, precisely aligned and clamped, then re-drilled to a larger diameter
- Trigger pocket can be cut in 6 to 11 passes vs 25 passes required with a drill press
- Router cuts pockets 5-6x faster
- Hand-drilling the trigger group/safety selector holes is faster to setup
- Lower can be completed in 1 hour (instead of 3 to 8 hours for the old drill press method)
- Durable
- TheĀ Easy Jig can be used to make dozens of lowers
- Components are Type III hard anodized for extra wear resistance
80% Lower ReplacementĀ Program: In the remote chance you make a mistake while using an 80% Arms AR-308 80% Lower Jig that damages your 80% Arms lower, we will replace your lower at a 50% discount off the list price.
*Router and tool kit are NOT included.
Shipping Restrictions: This item is restricted from shipping to New Jersey, Hawaii,Ā Connecticut, Rhode Island and Washington D.C. | If you're looking for a one-stop shopping experience, this is for you. Packaged to be everything you need, and nothing you don't, this makes starting your own personal gun factory a breeze. No measuring spindle sizes or figuring out the optimum bit speed on your router, we have it all covered for you. Keeping in tradition with making the easiest router-jigs on the market, we've also made it as easy as possible to get started.
The threaded bolt catch screw that is required with our .308 lowers does not come with our lower. However, it does come standard in ourĀ .308 Lower Parts Kit.
This Kit Includes:
- TheĀ Easy JigĀ® Gen 3 Multiplatform
- ThreeĀ 80% LowersĀ of your choice
- Freedom Router
- Complete ToolkitĀ (withĀ optional upgrade)
What Makes the Easy JigĀ®Ā Gen 3 Special?
Universal
- The only jig known toĀ fit every known AR-15, AR-9, AR-45, and DPMS Gen 1 .308 lower
- Converts between AR-15 and .308 in seconds
- No adapter pieces are required to convert, adjustment is fast and easy.
- Self centering mechanism ensures perfectionĀ even with exoticĀ billet lower designs
- Tested to work with over 23 of the most common handheld routers
- Completely compatible with full size routers (adapter required).Ā Click to viewĀ list of compatible routers.
Fast
- Less drilling, drill only 1 hole prior to milling
- Worldās fastest jig, can complete an 80% lower inĀ under 30 minutes
- Jig requires no disassembly of side walls to insert or remove 80% lowers
- 80% lowers can be inserted or removed in under 10 seconds
Easy
- Built-in measuring gauges. No measuring tools needed
- No drill press needed, only a hand drill and handheld router
- Included Shop Vac AttachmentĀ means less mess!
Durable
- End mill never makes contact with jig, no wear surfaces
- End mill supported by premium quality bearing with extended service life
- Drill blockĀ made with hardened steel
- Hardened steel bushings in the sidewalls for durability
80% LOWER REPLACEMENTĀ PROGRAM: IN THE REMOTE CHANCE YOU MAKE A MISTAKE WHILE USING AN 80% ARMS JIG THAT CAUSES FUNCTIONAL DAMAGE TO YOUR 80% ARMS LOWER, WE WILL REPLACE YOUR LOWER AT A 50% DISCOUNT OFF OF THE LIST PRICE. PLEASE SEEĀ TERMS & CONDITIONS!
Made in USA
AppearanceĀ may vary based on availability
Shipping Restrictions: This item is restricted from shipping to New Jersey, New York, Hawaii,Ā Connecticut, Rhode Island and Washington D.C.
|
Reviews
There are no reviews yet.