Sale!
In Stock

Anodized AR-15 80% Forged Lower Receiver

$49.99

Manufactured in our own precision machine shop right here in Greer, South Carolina.

  • Type III Anodized Hard Coat
  • Anodized Aluminum Provides Against Corrosion
  • Forged in 7075-T6 Aluminum
  • Broached and Flared Magwell
  • Tumbled and Hand De-Burred
  • ATF Approved

 

ALL PAID ORDERS WILL BE SHIPPED ASAP! FORGINGS ON HAND AND MACHINING 24/7!

Description

What is an Anodized 80% Lower Receiver?

You can rest assured of quality with this Anodized 80% Lower Receiver. All of our products are made in Greer, SC in our precision machine shop.

With an 80% lower, it is often referred to as a “paperweight” or a “ghost gun”. Until you complete your build, the 80% lower is not considered a firearm or a complete receiver. Because it’s not a firearm, no FFL is necessary to buy, ship, or receive the product.

When the lower comes anodized, as ours does here, it has had a protective coat created by oxidizing the aluminum. This is sometimes also referred to as a hard coat. The anodization helps to protect the lower from wear and tear, as well as any potential corrosion.

If you are considering building out an AR-15, buy the made in the USA Anodized 80% Forged Lower from Palmetto State. We stand behind the quality of our products and don’t let anything leave our shop without meeting our quality and precision standards.

We guarantee the accuracy and alignment of our lowers. Your 80% lower is built with the strongest aluminum (7075) and provides a slightly lighter feel compared to a billet option.

With an 80% forged lower, there is no serial or registration required since it is not a firearm. If you live in a not-so-friendly gun state, be sure you are well aware of the laws before purchasing.

Please note: We are not able to legally ship to NY, NJ, CT, RI, or DC. If you place an order with a shipping address for one of these states, the order will be canceled.

Reviews

There are no reviews yet.

Be the first to review “Anodized AR-15 80% Forged Lower Receiver”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsAnodized AR-15 80% Forged Lower Receiver removeAM-15 80% LOWER RECEIVER - RAW ALUMINUM removeType III Hard Anodized Billet AR-15 80% Lower Receiver remove308 80% LOWER RECEIVER AND JIG SYSTEM - OLIVE DRAB GREEN removeBlack Cerakoted 80% Lower Billet (1-pack) removeBlack .308 80% Lower Billet Fire/Safe Engraved (1-Count) remove
ImagePlaceholder
SKUSKU:D2-K067-U000P80-308KIT-ODG-kit-DNUAR15-BLT-LOW-CEROL308A-E
Rating
Price $49.99$48.29$99.99$100.00$89.99$119.99
Stock

Out of stock

AvailabilityOut of stock
Add to cart

Add to cart

Add to cart

Add to cart

Read more

Add to cart

Add to cart

DescriptionManufactured in our own precision machine shop right here in Greer, South Carolina.
  • Type III Anodized Hard Coat
  • Anodized Aluminum Provides Against Corrosion
  • Forged in 7075-T6 Aluminum
  • Broached and Flared Magwell
  • Tumbled and Hand De-Burred
  • ATF Approved
  ALL PAID ORDERS WILL BE SHIPPED ASAP! FORGINGS ON HAND AND MACHINING 24/7!

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.
Content

What is an Anodized 80% Lower Receiver?

You can rest assured of quality with this Anodized 80% Lower Receiver. All of our products are made in Greer, SC in our precision machine shop. With an 80% lower, it is often referred to as a “paperweight” or a “ghost gun”. Until you complete your build, the 80% lower is not considered a firearm or a complete receiver. Because it’s not a firearm, no FFL is necessary to buy, ship, or receive the product. When the lower comes anodized, as ours does here, it has had a protective coat created by oxidizing the aluminum. This is sometimes also referred to as a hard coat. The anodization helps to protect the lower from wear and tear, as well as any potential corrosion. If you are considering building out an AR-15, buy the made in the USA Anodized 80% Forged Lower from Palmetto State. We stand behind the quality of our products and don’t let anything leave our shop without meeting our quality and precision standards. We guarantee the accuracy and alignment of our lowers. Your 80% lower is built with the strongest aluminum (7075) and provides a slightly lighter feel compared to a billet option. With an 80% forged lower, there is no serial or registration required since it is not a firearm. If you live in a not-so-friendly gun state, be sure you are well aware of the laws before purchasing. Please note: We are not able to legally ship to NY, NJ, CT, RI, or DC. If you place an order with a shipping address for one of these states, the order will be canceled.
The 80% Machined Lower isn't finished and comes in raw aluminum ready for your coating of choice. Made from 7075-T6 and features a 3/4 inch grip screw. These 80% Lowers are Designed off the AR-15 Platform. No FFL is required to purchase this 80% Lower. Please note that the rear lug pocket for the upper must be finished in the machining process in order to seat an upper California requires 80% Receivers to be serialized before fabrication. California residents must submit to a background before building. Other states have banned the sale, ownership, manufacture, and use of 80% Receivers. Because of changing firearm laws, this list may not be all-inclusive. The following are the states that have banned 80% receivers: NJ, NY, CT, HI, DC and RI.
  • Full mil-spec part compatibility ensures maximum rifle customization
  • Withstands the harshest punishment from any situation using ultra-tough design, precision machined from aircraft-grade billet aluminum for superior strength
  • Broached, flared mag well aids with faster, easier magazine reloads
  • Heavy-duty, integral trigger guard enables winter use with gloves
  • Threaded Bolt Catch
  • Rear takedown lug pocket completed
Lifetime warranty against manufacturing defects guarantees impeccable quality. We can ship to your door because 80% lower receivers are not considered firearms by the ATF. No FFL required. Feel the rewarding satisfaction of creating your own lower receiver - secure yours today.

We manufacture Type III Hard Anodized AR-15 Lowers using US sourced aerospace grade 6061 aluminum which is more resistant to corrosion and is much easier to mill than any other alloy used to make lower receivers. Our 80% lower AR receivers carry a lifetime warranty.

Compatible with Gen 2 & Gen 3 Jig. Not compatible with Gen 1 AR-15 Easy Jig® & Drill Press Jig.

Shipping Restrictions: This item is restricted from shipping to New Jersey, New York, Hawaii, Connecticut, Rhode Island, and Washington D.C.

Product Description

.308 80% Lower Receiver & Jig Includes a jig and all the drill bits. After two years of planning, design, engineering, and testing, we're proud to introduce the industry's first reinforced polymer receiver designed for the DPMS styled .308 in an 80% format.
  • Industrial strength, finest reinforced polymer material....nothing held back.
  • Feel the difference the second you pick it up.
  • Rock solid frame, injection molded from a fully automated system that was two years in the making.
The .308 80% Lower Receiver  Design features:  
  • Unique reinforced polymer design with solid core design
  • ATF compliant design
  • Beefed up buffer tube ring and ribbing across the entire upper surface area.
  • No-thread design on pistol grip area.
  • Stiffened magwell, ultra-light design.
  • See product page for additional parts list
  Is it legal? YES! The 308 unit is well within the defined parameters of a "reciever blank" defined by the ATF and therefore has not yet reached a stage of manufacture that meets the definition of firearm frame or receiver found in the Gun Control Act of 1968 (GCA). http://www.atf.gov/content/contact-us/pressroom/receiver-blanks-Q%26As P80-308 Kit List: Each Lower and Jig Kit comes with the following:
Lower Description ITEM Qty per Lower
308 Lower Receiver W308 Lower 1
Pistol Grip Nut 3/8in 1
Pistol Grip Screw 1.5in 1
Jig Description ITEM Qty per Lower
Warrhogg .308 Jig J100 1
End-Mill Bit with Laser Etched Depth Mark 7/16" end mill bit 1
Drill Bit, Safety Selector Switch Hole 3/8" drill bit 1
Drill Bit, Pin Holes for Trigger & Hammer 5/32" drill bit 1
Drill Bit, for Trigger Hole 5/16" drill bit 1
Trigger Guide TG100 1

Description

Every AR build starts from the ground up with a good lower receiver. Start yours in style with this badass 80% lower receiver by Outdoor Ops. This beauty comes to you in graphite black, so you can make sure that aesthetically, your build will look as awesome as it performs. See below for additional details. Specs:
  • Machined from American-made Mil-Spec 6061 aluminum billet
  • Graphite Matte Black Cerakote finish
  • Threaded bolt catch hole (threaded pin not necessary for function)
  • Armalite™ style (standard, mil-spec) lower parts kit compatible
  • Accepts standard and PMAG™ magazines

Description

Grab this billet, .308-chambered 80 percent lower to complete your own LR-308 build at home! CNC-machined right here in the U.S.A and backed by a Lifetime Warranty. This lower's compatible with DPMS Gen 1 and CMMG Mk3 .308 components.

LR-308 80 Percent Lower Features:

  • Integrated, one-piece trigger guard
  • Broached magwell for faster reloads
  • 100% Made in the USA
  • Lifetime Warranty
  • No FFL required

Specifications:

  • Caliber: .308 Winchester/7.62x51mm NATO
  • Construction: Billet 6061 T6 aluminum
  • Magazine: DPMS Gen 1/SR-25
  • Finish: Type III Hardcoat anodized
  • Engraving: "FIRE", "SAFE"
  • Buffer: Mil-spec

Parts Compatibility:

  • Upper: DPMS Gen 1, CMMG Mk3
  • Parts Kit: DPMS Gen 1, CMMG Mk3
  • Magazine: DPMS Gen 1, SR-5

Jig Compatibility

This LR-308 80% lower is not compatible with .308 80% lowers jigs from other manufacturers. This lower is compatible with the Elite Builder 308 Jig and Router Jigs. No FFL is required to purchase this 80 percent lower. This .308 80% lower receiver is not considered a firearm and is compliant with the Gun Control Act of 1968. Not classified as a firearm as defined in 18 U.S.C. 921(a)(3).
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information