AR-10 .308 16" TACTICAL ALPHA CARBINE KIT W/15" MLOK RAIL - DPMS
AR-10 .308 16" Tactical Carbine Kit w/15" Mlok Rail- DPMS Compatible. This kit contains all components to complete your AR-10 project. The kit comes WITHOUT 80% lower receiver. All components are carefully chosen to fit DPMS style lo pro .308 pattern and made in the USA. DPMS compatible.
Standard kit includes all of the following high quality parts:
Barrel: 16″ CMV, SOCOM CMV (lightweight)
Chamber: .308 Win
Twist: 1 in 10”
.750” Gas Block Diameter
Mid Gas System
DPMS Style low profile billet upper receiver
Ejection Port Cover
A2 Style Flash Hider
308 light profile free float handguard
308 Bolt Carrier Group
308 Charging Handle
308 Mil Spec Lower Parts Kit
Alpha 6-Position Mil-Spec Stock Assembly
Barrel: 16″ .308 Win M4 Feed Ramp 4150 CMV, 1 in 10” twist, mid length gas system with .750 gas block diameter. Barrel is finished off with 15" thin profile monolitic Mlok free float handguard, A2 "birdcage" style flash hider and a crush washer.
Upper: Billet DPMS style upper is flat top, precision machined and hard coat anodized per MIL-8625 Type 3 Class 2. These upper receivers are precision machined from a solid block of aluminum, a true billet upper for added strength and rigidity. These uppers include integral shell deflector, forward assist housing, M-4 style feed ramps, and have flat top 1913 picatinny rail. Complete with forward assist and dust cover assemblies.
Bolt Carrier Group: .308/7.62x51 complete bolt carrier assembly, chrome lined, nitride finish. MPI Tested. Comes complete with cam pin, firing pin and firing pin retainer.
Lower Build Kit: DPMS style .308 lower parts kit w/Ergo grip, compatible with small hole pins.
Stock: Alpha 6-position .308 carbine stock kit in black. Designed specifically for DPMS style 308 rifles. Includes buffer tube, castle nut, end plate, .308 buffer and carbine spring.
Please Note: Comes unassembled. Does not come with sights or magazines. Standard kit is DPMS compatible.
DUE TO A HUGE INCREASE IN ORDERS - PLEASE EXPECT AT LEAST 2-4 WEEKS DELAY BEFORE YOUR ORDER SHIPS. YOU WILL RECEIVE A TRACKING NUMBER ONCE WE GET YOUR ORDER OUT THE DOOR.
This kit is not an FFL item. Approximate weight of the kit: 7lb
This AR-10 build kit includes everything you need for your next build, except for the stripped lower. It is crafted with quality materials and covered by our lifetime warranty, this rifle kit is an outstanding choice for any budget.
- 18″ Barrel
- Chambered in .308 WIN with a 1:10 twist rate
- Bolt carrier group
- Charging handle
- 15″ CBC Industries AR-10 Keymod Handguard
- AR-10 Lower parts kit
- Sopmod buttstock
- Ergo Grip
- Fits DPMS Gen 1 Type Lowers
PRODUCT DETAILS: AR-10 RIFLE KIT – 18″ / 308 WIN / 1:10 / 15″ KEYMOD HANDGUARD / BCG / CHARGING HANDLE / BUTTSTOCK KIT / ERGO GRIP / LOWER PARTS KIT / 205185
➲ Buffer Tube Assembly
This buffer tube assembly kit includes an impact extruded 7075-T6 aluminum receiver extension with a durable hardcoat anodized finish. Featuring an extended bottom lip reducing carrier tilt, the buffer tube is compatible with MIL-SPEC AR-15 stocks.
➲ Enhanced Ergonomic Grip
Designed for performance, this grip creates a better interface between the shooter and firearm. Made from a molded hard polymer, providing a more positive grip and better weapon control than a standard pistol grip. This style offers superior comfort and helps prevent fatigue with its ergonomically correct finger grooves, providing you with an ergonomic and shooter focused grip for your AR build.
➲ AR-10 Lower Parts
The lower parts are integral to a reliable AR firearm. Our AR-10 lower parts provide rock-solid performance in demanding conditions.
The barrel is one of the few components that directly affect the accuracy and weight of your build. This barrel has a nitride finish for increased strength and durability. Featuring a rigid barrel design, this barrel is a favorite among hunters. This barrel offers a 1:10 twist rate, that is excellent for accuracy with various bullets. It is corrosion resistant resulting in an extended barrel life that is longer than conventional chrome lining. Thus, being the perfect barrel for long distance shooting, hunting and practically any outdoor shooting application you’ll subject your AR-10 too.
➲ Buffer Tube Assembly
This AR-10 Buffer Tube Assembly comes with everything you need to get your next ar build ready. Assembly includes buffer tube, castle nut, endplate, spring & carbine buffer. The tube is extruded from 6061-T6 aluminum and has a matte black hardcoat anodized finish. This assembly features a snug fit to ensure no unwanted buttstock movement during operation. In addition, it allows for any desired 6 position placement with zero restrictions giving you the most comfortable fit and versatility.
➲ Bolt Carrier Group
There is nothing more crucial to the performance of your AR-10 than the bolt carrier group. Manufactured to DPMS and finished with a a superior quality parkerized finish that protects against corrosion and heat, our BCG will not let you down. To ensure that it will provide superior performance in your AR-10, each bolt carrier group undergoes high-pressure testing (HPT) and magnetic particle inspection (MPI). Whether you’re looking for a drop-in DPMS quality replacement for your current AR, or are going for a new build, this bolt carrier group provides you with the reliability and performance you expect from a premium product.
➲ Standard AR-10 Charging Handle
A central component of your AR-10, the charging handle not only assists in chambering a round, but is your main tool to clear a round that won’t eject cleanly. The 7075-T6 aluminum design results in a rugged and capable charging handle for your AR-10. With lightweight aluminum construction and a traditional snag-free latch design, this charging handle provides superior function and reliability.
➲ .750 Low Profile Gas Block
The gas block is a critical link in the chain that is too often overlooked. This component ensures that your AR runs reliably. Made from high-quality steel with a smooth nitride finish, this .750 low-profile gas block is efficiently designed to stay put with the percussion of gunfire. With its low profile this gas block allows it to fit under the most ergonomically designed handguards and rails on the market.
➲ A2 Flash Hider
The muzzle device is designed to perform a specific task, like suppress flash intensity or reduce felt recoil. This A2 Flash Hider is machined from quality steel and finished with an exceptionally corrosion resistant salt bath nitride for a lifetime of service. It provides effective flash suppression that preserves the shooter’s night vision by disrupting the muzzle flash when firing in low light conditions. While its closed bottom with top and side ports offers reduced dust signature when shooting from the prone position while additionally acting as a compensator.
||.308 / 7.62×51 NATO, .308 WIN
This kit will include everything to finish your AR-15 pistol except the STRIPPED lower receiver
- Either mil spec upper receiver or upgraded billet upper receiver (depending on availability) FDE cerakote
- Nitride bcg
- Standard charging handle
- 10″ free float quad rail FDE
- Forward assist and dust cover include (where applicable)
- 10″- 300 Blackout
- Steel gas block
- Stainless steel gas tube
- Steel Flash hider (design will depend on caliber choice) pictured is 5.56 kit
- 100% USA made Lower parts kit
- Pistol buffer tube kit – may or may not have foam depending on availability
KIT notice as of March 1st 2020.
All build kits are subject to change slightly in this time of EXTREME demand. We are not currently able to fill specific spec requests.. the kit parts will fall into the general specs above but items such as stocks, handguards, and muzzle devices are changing daily.
Due to extreme order volume the handguard may NOT be a quad rail.. it will be either a quad rail, mlok or keymod depending on availability. You can still attach rail sections to mlok and keymod for your accessories
|The AM-10 .308 Kit comes with the following parts for you to build your own AM-10:
The AM-10 Stripped Lower Receiver is American made with superior quality for less! Our lower Receivers are CNC machined from a high-strength, 7075 T6 aluminum forging for reliable performance and outstanding durability.
This AM-10 Lower is marked .308 Cal. and comes in type III black hard anodize with a Closed Trigger.
Make sure to pair your Anderson AM-10 Lower Receiver with one of our .308 Uppers for a solid fit for your AM-10 build!
You will receive an AM-10 stripped Upper Receiver that is machined from 7075 T6 Aluminum forging. Can be used with multiple calibers on the AR-10 platform. This upper receiver comes in type III black hard anodize. Flattop uppers feature a MIL-STD 1913 Picatinny rail.
The 18" .308 Win. barrel is the perfect barrel to start your next build and add to your AM-10 collection. This barrel is made from 4150 Chrome Moly Vanadium Steel with a Parkerized finish. Featuring a mid length gas system with a .750" gas port and a 1:7 twist, this barrel provides top accuracy and precision for your .308 Win. build.
Lower Parts Kit includes all parts to build your Lower Receiver and comes with a Magpul Pistol Grip.
The .308 EXT 11.5" Free Float Kit provides ultimate strength and durability while also providing comfort and functionality. The Length of this free float is 11.5" long. Featuring continuous top picatinny rail and bottom and sides designed to accept picatinny rails. Made from 6061-T6 Aluminum, and finished to Mil Spec with type III Hard Coat Anodizing. This Kit includes a steel barrel nut (1Â¼ "-18 thread), an 2 allen head bolts. Will need the Anderson's AM-10 Barrel Nut Wrench *Rail on Free Float will line up with an Anderson MFG 308 Upper
Comes with a Ti7 Butt Stock and Am-10 buffer Tube Kit. Our Aluminum 6 Position Anodized Buffer Tube Kit contains the correct weight Spring, End Plate, Buffer, Buffer Spacer and Castle Nut.
The .308 Complete Bolt and Carrier Group is Phosphate coated and Chrome Lined. The Carrier is made from 8620 steel, and the Bolt is made from 9310 steel and Phosphate coated, MPI Tested. The .308 Bolt and Bolt Carrier Assembly comes complete with Cam Pin, Firing Pin and Firing Pin Retainer. This BCG works on the SR25 platform.
Mid Length Gas Tube is 12.0625" and Made From 304 Stainless Steel. Low profile .750 Aluminum Gas Block and screws.
Standard Charging Handle and .308 knight Stalker Flash Hider Included.
Accepts DPMS-pattern magazines, including the Magpul .308 PMAG.
A Federal Firearms License (FFL) is required to purchase this item.
Email your FFL for transfer to [email protected]
Or click here to submit your FFL through our website.
- AM-10 .308 Lower Receiver
- AM-10 .308 Upper Receiver, 18"
- .308 Winchester, 1-10 Twist Barrel
- Magpul Pistol Grip & Lower Parts Kits (Not Installed)
- 11.5 EXT Forearm Kit
- Knight Stalker Flash Hider
- AM-10 Buffer Tube Kit
- Ti7 Butt Stock
- Charging Handle
- AM-10 Bolt Carrier Group - .308 Winchester
- Low Profile Gas Block
- Mid Length Gas Tube.
- Billet 6061 upper receiver
- Standard Charging Handle
- Glock cut 9mm bcg
- 7″ Nitride 9mm barrel
- 7″ Free Float handguard (keymod or mlok depending on availability A2 muzzle device or better)
- Mil spec lower parts kit USA MADE
- 9MM Pistol buffer kit – may or may not have foam depending on availability
AR-9 9MM 4.5" ENHANCED PISTOL BUILD KIT W/ SBA3 BRACE
AR-9 9MM 4.5" ENHANCED PISTOL BUILD KIT W/ SBA3 BRACE - Glock Style kit contains all the components to complete your AR-9 project. This kit is based on Mil Spec upper and designed to work with both Colt/RR and Glock style lowers. The kit comes with everything you need to complete your AR-9 pistol EXCEPT 80% lower receiver. Can be purchased separately. All components are Mil Spec and made in USA.
Barrel: 4.5″ 4150 Chrome Moly Vanadium, Government Profile
Twist: 1 in 10”
Blowback Gas System - No Gas Block
AR-15 upper receiver, complete with dust cover and forward assist, anodized
A2 Flash Hider
Free Float Keymod Handguard
9mm Hybrid Bolt Carrier Group
AR-15 Charging Handle
AR-15 Mil Spec Lower Parts Kit
SBA3 Adjustable Pistol Brace Assembly
Please Note: Comes unassembled. BCG will fit with Glock or Colt style lowers and mags. Mil Spec upper is guaranteed for outstanding performance with dedicated AR-9 lowers. If you are using mag adapter to accept Colt mags in your standard AR15 lower, some machining will be required.
DUE TO A HUGE INCREASE IN ORDERS - PLEASE EXPECT AT LEAST 4-6 WEEKS DELAY BEFORE YOUR ORDER SHIPS. YOU WILL RECEIVE A TRACKING NUMBER ONCE WE GET YOUR ORDER OUT THE DOOR.