In Stock

Pistol Build Parts Kit w/ Front & Rear Serrated Slide (GlockĀ® 17 Compatible)

$449.99

SKU: N/A Categories: ,

Description

Description

Got your own GlockĀ® 17 frame or Polymer80 mid-size frame but need to revamp, restore, or just give it a fresh look? Then check out this slide and parts kit. This sucker’s like our GlockĀ® 17 (gen 3)-compatible build kit but without the 80% frame and necessary jig and tooling. If you’ve got a fabricated frame, here’s your final assembly kit. Breathe some life into your gen 3 GlockĀ® 17 or completed G17-compatible 80% frame with this slide, barrel and parts kit.

Front and Rear Serration Slide:

The included front- and rear-cut slide allows for quick and easy completion of your 80% full-sized pistol build with a serrated, customized, high-quality slide. Wrap-around serrations allow for easy handling and control, while a 416 stainless steel billet construction features machining to factory specifications.

  • Front- and rear-cut slide serrations
  • Heat treated to 41-44 on the Rockwell C scale
  • Matte black nitride finish
  • OEM internal dimensions
  • OEM GlockĀ®-compatible sight cuts
  • For Gen3 pistols

Choose Your Barrel:

Made with proper US craftsmanship, these Gen3 barrel boasts the highest level of quality and accuracy you’ll ever find in any full-sized pistol. Manufactured from heat-treated 416R stainless, these Gen3 barrels will guarantee consistent shop shot groups and accuracy when it counts most.

  • Ā Ā Ā Ā Ā Ā Ā Ā Rifled with 1:10 rate of twist
  • Ā Ā Ā Ā Ā Ā Ā Ā Includes 11-degree target crown
  • Ā Ā Ā Ā Ā Ā Ā Ā Features nitride-treated finish (black option)

Barrel Options:

  • Option 1: Black Nitride
  • Option 2:Ā Stainless Steel Fluted

Includes Top-of-the-line Accessories

This kit includes the accessories and components you need to complete a frame and hit the range. This kit is compatible with Gen3 GlockĀ® 17 components for further customization. These are the accessories included:

  • Ā Ā Ā Ā Ā Ā Ā Ā OEM-spec slide parts kit
  • Ā  Ā  Ā  Ā  OEM-spec frame parts kit
  • Ā  Ā  Ā  Ā  OEM-spec Gen3 Spring and guide rod

DISCLAIMER: ā€œGLOCKā€ is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of ā€œGLOCKā€ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visitĀ www.glock.com.

Additional information

Choose Barrel Finish:

Black Nitride, Stainless Steel

Reviews

There are no reviews yet.

Be the first to review “Pistol Build Parts Kit w/ Front & Rear Serrated Slide (GlockĀ® 17 Compatible)”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsPistol Build Parts Kit w/ Front & Rear Serrated Slide (GlockĀ® 17 Compatible) removeGlock 19 Lower Parts Kit Gen 3 removeP80 PF940C 80 Percent Compact Pistol Frame Kit – OD Green removeG19 V1 BBK BUILDERS KIT 9mm removePolymer 80 PF940C Build Kit w/ Skeletonized Slide – Blue Titanium removePolymer 80 Glock 19 PF940C 80% Compact Pistol Frame Kit remove
ImageLower Parts KitP80 PF940C 80 Percent Compact Pistol Frame Kit – OD GreenPolymer-80-Build-Kit-w-Skeletonized-Slide-Blue-Titanium
SKUPF940C-BLK
Rating
Price$449.99 $59.99 $119.99$499.69 $449.99$109.99$209.97
Stock
Availability
Add to cart

Select options

Add to cart

Add to cart

Select options

Add to cart

Select options

Description
Content

Description

Got your own GlockĀ® 17 frame or Polymer80 mid-size frame but need to revamp, restore, or just give it a fresh look? Then check out this slide and parts kit. This sucker's like our GlockĀ® 17 (gen 3)-compatible build kit but without the 80% frame and necessary jig and tooling. If you've got a fabricated frame, here's your final assembly kit. Breathe some life into your gen 3 GlockĀ® 17 or completed G17-compatible 80% frame with this slide, barrel and parts kit.

Front and Rear Serration Slide:

The included front- and rear-cut slide allows for quick and easy completion of your 80% full-sized pistol build with a serrated, customized, high-quality slide. Wrap-around serrations allow for easy handling and control, while a 416 stainless steel billet construction features machining to factory specifications.
  • Front- and rear-cut slide serrations
  • Heat treated to 41-44 on the Rockwell C scale
  • Matte black nitride finish
  • OEM internal dimensions
  • OEM GlockĀ®-compatible sight cuts
  • For Gen3 pistols

Choose Your Barrel:

Made with proper US craftsmanship, these Gen3 barrel boasts the highest level of quality and accuracy you’ll ever find in any full-sized pistol. Manufactured from heat-treated 416R stainless, these Gen3 barrels will guarantee consistent shop shot groups and accuracy when it counts most.
  • Ā Ā Ā Ā Ā Ā Ā Ā Rifled with 1:10 rate of twist
  • Ā Ā Ā Ā Ā Ā Ā Ā Includes 11-degree target crown
  • Ā Ā Ā Ā Ā Ā Ā Ā Features nitride-treated finish (black option)

Barrel Options:

  • Option 1: Black Nitride
  • Option 2:Ā Stainless Steel Fluted

Includes Top-of-the-line Accessories

This kit includes the accessories and components you need to complete a frame and hit the range. This kit is compatible with Gen3 GlockĀ® 17 components for further customization. These are the accessories included:
  • Ā Ā Ā Ā Ā Ā Ā Ā OEM-spec slide parts kit
  • Ā  Ā  Ā  Ā  OEM-spec frame parts kit
  • Ā  Ā  Ā  Ā  OEM-spec Gen3 Spring and guide rod
DISCLAIMER: ā€œGLOCKā€ is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of ā€œGLOCKā€ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visitĀ www.glock.com.

Description

Glock 19 Lower Parts Kit Gen 1-3
  • Connector
  • Slide Stop Release with Spring
  • Locking Block Pin
  • Extended Magazine Release
  • Magazine Release Spring
  • Slide Lock
  • Slide Lock Spring
  • Trigger Housing Pin
  • Trigger Housing with Ejector
  • Trigger Pin
  • Trigger Spring
  • Trigger with Trigger Bar
Shipment Not Available to:Ā California, Connecticut, District of Columbia, Hawaii, Maryland, Massachusetts, New Jersey, New York, Pennsylvania, Rhode Island, Washington.

PF940Cā„¢ Compact Frame

PLEASE NOTE WHEN USING LONE WOLF DIST. COMPLETION PARTS, NOT ALL PARTS MAY BE GEN 3, YOU MUST USE GEN 3 ONLY, ANY OTHER PARTS INSTALLED MAY CAUSE DAMAGE AND WILL IMMEDIATELY VOID THE LIFETIME WARRANTY OF YOUR POLYMER80 PRODUCT. CHECK ALL COMPONENTS PRIOR TO INSTALLATION. POLYMER80, INC. IS NOT RESPONSIBLE FOR DAMAGES CAUSED BY INCORRECT PARTS INSTALLATION. Polymer80 is pleased to present the PF940Cā„¢ 80% Compact Pistol Frame. OfferingĀ compatibility withĀ GlockĀ® 19/23 Gen3 components,Ā the PF940Cā„¢ is an industry first. The frame comes with an aggressive texture that emulates a stippled pattern.Ā  Features like the extended beaver tail, double undercut trigger guard, and a thumb ledgeĀ considerablyĀ enhance the ergonomics allowing for an effective grip and improved recoil mitigation. Product Overview:
  • Enhanced Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Aggressive and Adaptable Grip Texture
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRSā„¢)
  • Stainless Steel Rear Rail Module (RRMā„¢)
  • Hardened Pins for LBRS ā„¢ and RRMā„¢
  • Complete Finishing Jig, Drill bits
  • Compatible with GlockĀ® 19/23 Gen3 Components
 
V1 G19 SLIDE SHADOW SYSTEMS INTERNALS MATCH GRADE BARREL OEM GLOCK SIGHTS RECOIL SPRING GLOCK EQUIVALENT LPK POLYMER 80 FRAME WITH JIG/TOOLING THIS IS A BUILDERS KIT AND REQUIRES ASSEMBLY
Shipment Not Available to:Ā California, Connecticut, District of Columbia, Hawaii, Maryland, Massachusetts, New Jersey, New York, Pennsylvania, Rhode Island, Washington

Description

This is a Polymer 80 Build Kit. Looking to build an awesome 9MM handgun? This is a Polymer 80 Complete Build Kit w GlockĀ  Compatable Slide with RMR cut is a great self defense or range handgun. Highly customizable and comfortable. This kit includes: UPPER:
  • Glock 19 Compatible Slide w/ RMR cut
  • Glock Compatible 19 Upper Parts Kit
  • Glock Compatible 19 Guide Rod
  • 9MM 4″ Glock Compatible barrel
LOWER:
  • Polymer 80 PF940Cā„¢ 80% COMPACT PISTOL FRAME KIT
  • Polymer 80 PF940C Jig Kit + Drill Bits
  • Glock Compatible 19 Lower Parts Kit

The Polymer 80 Compact Pistol Frame PF940C kit is designed to replace the frame of a compact size Glock pistol such as the Glock 19 or 23. It can be built for either 9mm luger or 40 S&W caliber with only a few parts difference. The kit is easy to complete with the jig and bits included. The only required tools are aĀ drillĀ andĀ files. However, this process is made easier with the use of a few extra tools:Ā dremel,Ā end snipsĀ andĀ C-Clamps. See the video in the picture section above for more details.

Works with Generation 1 - 3 Glock Compatible Parts. Product Overview:
  • Enhanced Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Aggressive Grip Texture
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRSā„¢)
  • Stainless Steel Rear Rail Module (RRMā„¢)
  • Hardened Pins for LBRS ā„¢ and RRMā„¢
  • Complete Finishing Jig and Drill bits Included
  • Compatible with GlockĀ® 19/23 Gen3 Components

ā€œGLOCKā€ is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Rockeybrass.comĀ is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H. DISCLAIMER: We do not provide legal advice or legal counsel. It is your responsibility to understand the respective State laws and Federal laws.Ā This product is to be installed by a competent gunsmith. No liability is expressed or implied for damage or injury which may result from installation or use of this product.Ā These frames require milling and possibly fitment of the various parts included. We do not provide build and/or gunsmithing advice. All issues and warranty for the Polymer 80 frames are handled by Polymer 80 directly. Due to the legal nature of these kits, we do not accept returns or exchanges on these frame kits for any reason. Please note that we cannot ship these to the state of New Jersey or DC. Washington state residents will need to provide a copy or photo of their Drivers License and Concealed Pistol License prior to shipping.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Choose Barrel Finish:

Black Nitride, Stainless Steel

Frame Color

Black, Gray, FDE, OD Green

Color *

Black, FDE, Grey, OD Green, Blue Titanium, Cobalt

Add Frame Parts Kit

None, Rockey Brass Frame Parts Kit (+$49.99)

Add Holster

None, Adaptive IWB Holster for PF940C Right Handed (+$49.99), Adaptive IWB Holster for PF940C Left Handed (+$49.99)