Out of Stock

Universal Drill Press 80% AR-15 Jig

$99.99

Out of stock

Categories: ,

Description

The 80% Arms universal drill press AR-15 jig consists of 5 individually replaceable plates that show you where to drill or mill your lower. We recommend it as a more cost effective option for more experienced users who already own a drill press. For those looking for the simplest, fastest system to complete a lower, we highly recommend our router based Easy Jig® system.

Our universal drill press 80% AR-15 jig makes finishing your 80% lower at home with a drill press or mill much easier. Every part of this drill jig is reusable and can be used to make dozens of lowers. This AR-15 jig is NOT compatible with our .308 lowers or Easy Jig® tool kit.

*Please note, the standard finish for this jig is silver, not anodized gray. 

*We guarantee our Gen 1 AR-15 Drill 80% Lower Jig Press will fit all forged and billet AR-15 lowers except for New Frontier Armory, Iconic Industries, and lowers with a Ambidextrous Bolt Release.

80% LOWER REPLACEMENT PROGRAM: IN THE REMOTE CHANCE YOU MAKE A MISTAKE WHILE USING AN 80% ARMS JIG THAT DAMAGES YOUR 80% ARMS LOWER, WE WILL REPLACE YOUR LOWER AT A 50% DISCOUNT OFF OF THE LIST PRICE.

This jig is NOT compatible with an AR9 lower due to the sidewall dimensions, and it to be used with AR-15 only. 

Shipping Restrictions: This item is restricted from shipping to New Jersey, Hawaii, Connecticut, Rhode Island and Washington D.C.

Reviews

There are no reviews yet.

Be the first to review “Universal Drill Press 80% AR-15 Jig”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsUniversal Drill Press 80% AR-15 Jig removeElite Builder 80% Lower Jig - AR15/AR9 remove308 Lower Receiver Jig removePolymer80 RJ556U - Universal 80 Lower Jig for Mil-spec AR-15/AR9 80% Lower Receivers removeAll You Need Kit + (3) .308 80% Lowers removeEasy-Jig® Gen 3 Starter Kit - 308 remove
ImageAR15 JIG
SKUjig-308P80-RJ556U
Rating
Price$99.99$159.00$39.99
Stock

Out of stock

Out of stock

Out of stock

Out of stock

Out of stock

Out of stock

AvailabilityOut of stockOut of stockOut of stockOut of stockOut of stockOut of stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
ContentThe 80% Arms universal drill press AR-15 jig consists of 5 individually replaceable plates that show you where to drill or mill your lower. We recommend it as a more cost effective option for more experienced users who already own a drill press. For those looking for the simplest, fastest system to complete a lower, we highly recommend our router based Easy Jig® system. Our universal drill press 80% AR-15 jig makes finishing your 80% lower at home with a drill press or mill much easier. Every part of this drill jig is reusable and can be used to make dozens of lowers. This AR-15 jig is NOT compatible with our .308 lowers or Easy Jig® tool kit. *Please note, the standard finish for this jig is silver, not anodized gray.  *We guarantee our Gen 1 AR-15 Drill 80% Lower Jig Press will fit all forged and billet AR-15 lowers except for New Frontier Armory, Iconic Industries, and lowers with a Ambidextrous Bolt Release.

80% LOWER REPLACEMENT PROGRAM: IN THE REMOTE CHANCE YOU MAKE A MISTAKE WHILE USING AN 80% ARMS JIG THAT DAMAGES YOUR 80% ARMS LOWER, WE WILL REPLACE YOUR LOWER AT A 50% DISCOUNT OFF OF THE LIST PRICE.

This jig is NOT compatible with an AR9 lower due to the sidewall dimensions, and it to be used with AR-15 only. 
Shipping Restrictions: This item is restricted from shipping to New Jersey, Hawaii, Connecticut, Rhode Island and Washington D.C.

This Elite Builder 80% Lower Jig is DISCONTINUED. 

Compatible with our Forged 80% Lowers and our Premium Fire/Safe Marked Billet 80% Lowers! Other manufacturers' billet 80% lowers may be compatible with the Elite Builder 80% lower jig, provided their lower receiver design adheres to mil-spec specifications. However, we cannot guarantee that other manufacturers' lowers, including 9mm calibers, will absolutely fit into the jig without modification unless they meet mil-spec parameters. The Elite Builder 80% Lower Jig and tool kit combo is the key to cutting and drilling multiple 80% lower receivers for the AR-15 or AR-9 without losing efficiency or accuracy. Made from hardened steel plates, the Elite Builder jig can machine any standard (mil-spec) forged, billet, or polymer receiver without breaking a sweat, with results as accurate as one-thousandth (0.001”) of an inch. You can also now choose to include the enhanced drill plate to further make it easier for you to drill and hollow out your fire control group pocket. PLEASE NOTE: Tooling for this jig is optional. You'll need to select whether you would like accompanying tooling with your jig.

Quality HSS Bits

The jig’s only as good as the bits you use it with. Choose to add on the optional tooling - quality industrial-grade HSS (high-speed steel) drill bits and end mill bits to cut through all that aluminum in no time. All you need to complete your receiver blank is a basic drill press and about two hours’ time. The tool kit includes:
  • (1) ⅜ Drill Bit - 5”
  • (1) 5/32 Drill Bit - 3”
  • (1) ⅜ Short End Mill - 3”
  • (1) 5/16 Short End Mill - 4”
  • (1) ⅜ Long End Mill - 4”

Jig Features & Specs:

  • Self-aligning jig requires no special fitting during setup
  • Compatible with any standard AR-15 or AR-9 80% lower
  • Black anodized finish protects against rust and corrosion
  • Pre-drilled holes for hammer, trigger, and safety pin holes
  • Reinforced steel template plates for completing multiple lowers
 

Description

308 & AR15 jig top plates are interchangeable. This jig ONLY fits Broken Arms 308 lower receiver. Broken Arms 308 Lower Receiver jig, tooling kit, and a drill press is all you need to turn your 80% receiver into a fully functional 100% 308 receiver.
  • CNC machined
  • Hard anodized type III
  • Hardened drill bushings
  • Integrated depth chart
  • All parts are individually engraved with drill diameters and depths
KIT CONTENTS:
  • 2) side plates
  • 5) top plates
  • 4) 1/4-20 x 3/4 screws
  • 2) 1/4-20 x 2 screws
Receiver not included
This jig is compatible with our Forged 80% Lowers. Our Premium Fire/Safe Marked Billet 80% Lowers are not compatible with this 80% lower jig. Other manufacturer's billet 80% lowers may compatible with this 80% lower jig, provided their lower receiver design adheres to mil-spec specifications. Looking for the perfect affordable alternative to the expensive and more complicated metal jigs? You’ve come to the right place! This low-cost 80 lower jig by Polymer80 is a perfect choice, especially if you’re just planning on finishing a few AR15 or AR9 80 lowers. Why pay more, right? The Polymer80 RJ556U AR15/AR9 Universal Jig is an excellent addition to the very popular Polymer80 line. This Polymer80 jig wasn’t only designed for polymer lowers in mind. This 80 lower jig was created for compatibility with all mil-spec 80% AR15 lower receivers and AR9 80 lowers, whether they are polymer OR metal. The Polymer80 AR15 Universal Jig is designed with a super rigid long-fiber nylon composite, which will allow you to utilize the 80% lower jig up to 3 times. The  Polymer80 RJ556U AR15/AR9 Universal Jig is designed to provide a stable platform for milling, and therefore encompasses the entire AR15 or AR9 lower receiver. Other competing 80 lower jigs are typically more expensive and difficult to secure the 80 lower in the vise and more likely to damage the 80 lower receiver while milling.

The Polymer80 P80RJ556U AR15/AR9 Universal Jig includes:

  • 2 sided jig
  • 3 trigger guides
  • 9mm HSS end mill
  • 5/16ths drill bit
  • 3/8ths drill bit
  • 5/32nd drill bit

Example Tools Needed:

Extremely expensive or high-end tools are not required to use this jig to finish your lower.  All of the suggested tools mentioned below can be utilized for other popular Polymer80 receiver projects, including .308 80 lower receivers and 80% Glock® compatible pistol frames, so it’s easy to justify the expense!
  • Vise For Drill Press - 6” inch jaws
  • Drill Press -1850-2250 RPM
  • Digital Calipers
  • Dremel Bit #9904
  • Level
  • Round Machinists File
  • Non-marring vice jaws
  • Lower Receiver Vice Block
  • Upper Receiver Vice Block
The complete list of suggested tools can also be found in the instruction guide What are you waiting for?  Your build awaits!
If you're looking for a one-stop shopping experience, this is for you. Packaged to be everything you need, and nothing you don't, this makes starting your own personal gun factory a breeze. No measuring spindle sizes or figuring out the optimum bit speed on your router, we have it all covered for you. Keeping in tradition with making the easiest router-jigs on the market, we've also made it as easy as possible to get started. The threaded bolt catch screw that is required with our .308 lowers does not come with our lower. However, it does come standard in our .308 Lower Parts Kit. This Kit Includes:
  • The Easy Jig® Gen 3 Multiplatform
  • Three 80% Lowers of your choice
  • Freedom Router
  • Complete Toolkit (with optional upgrade)
What Makes the Easy Jig® Gen 3 Special? Universal
  • The only jig known to fit every known AR-15, AR-9, AR-45, and DPMS Gen 1 .308 lower
  • Converts between AR-15 and .308 in seconds
  • No adapter pieces are required to convert, adjustment is fast and easy.
  • Self centering mechanism ensures perfection even with exotic billet lower designs
  • Tested to work with over 23 of the most common handheld routers
  • Completely compatible with full size routers (adapter required). Click to view list of compatible routers.
Fast
  • Less drilling, drill only 1 hole prior to milling
  • World’s fastest jig, can complete an 80% lower in under 30 minutes
  • Jig requires no disassembly of side walls to insert or remove 80% lowers
  • 80% lowers can be inserted or removed in under 10 seconds
Easy
  • Built-in measuring gauges. No measuring tools needed
  • No drill press needed, only a hand drill and handheld router
  • Included Shop Vac Attachment means less mess!
Durable
  • End mill never makes contact with jig, no wear surfaces
  • End mill supported by premium quality bearing with extended service life
  • Drill block made with hardened steel
  • Hardened steel bushings in the sidewalls for durability

80% LOWER REPLACEMENT PROGRAM: IN THE REMOTE CHANCE YOU MAKE A MISTAKE WHILE USING AN 80% ARMS JIG THAT CAUSES FUNCTIONAL DAMAGE TO YOUR 80% ARMS LOWER, WE WILL REPLACE YOUR LOWER AT A 50% DISCOUNT OFF OF THE LIST PRICE. PLEASE SEE TERMS & CONDITIONS!

Made in USA

Appearance may vary based on availability

Shipping Restrictions: This item is restricted from shipping to New Jersey, New York, Hawaii, Connecticut, Rhode Island and Washington D.C.

 
Wanting to make the dive into building your own firearms, but aren't sure where to start? You've came to the right place. Not everyone has powertool or gunsmithing experience, and tackling both at once for a new project can seem a bit daunting. So we've made things as easy as possible for you to get started, but everything you need in one simple package. With a lower included, all you need to do is turn your router on, and get milling. It's really that easy. The threaded bolt catch screw that is required with our .308 lowers does not come with our lower. However, it does come standard in our .308 Lower Parts Kit. Here's what comes in the Starter Kit:
  • (1) 80% Raw  308 Lower
  • Easy Jig® GEN 3 Multi-Platform Jig (Handheld Router Compatible)
  • Easy Jig® Official Tool Kit, which includes:
    • Solid Carbide End mill
    • Optimized Fluting for Aluminum
    • Extremely Rigid Support
    • Direct-Thread to your Router
    • Longer Lasting, Averaging 5-7 Lowers per bit for Experienced Users
    • Made in the USA

LOWER FEATURES:
  • Full mil-spec part compatibility ensures maximum rifle customization
  • Withstands the harshest punishment from any situation using ultra-tough design, precision machined from aircraft-grade billet aluminum for superior strength.
  • Broached, flared mag well aids with faster, easier magazine reloads
  • Heavy-duty, integral trigger guard enables winter use with gloves
  • Unique, breakthrough design for easy bolt catch installation with a regular punch eliminates need for an expensive, special tool
  • Rear takedown lug pocket completed
  The patented Easy Jig® Gen 3 Multiplatform™ replaces the Gen 2 as the world's easiest to use, fully universal, 80% lower jig capable of finishing AR-15, AR-9, AR-45 and DPMS gen 1 pattern .308 80% lower receivers without the need for any additional adapter pieces. The jig converts between AR-15 and .308 by quickly adjusting the rear buffer support, making it easier than ever before to mill any platform you desire.

The Easy Jig® Gen 3 is the culmination of our years of experience gained from manufacturing the world’s first router jig and the best selling 80% lower jig in history, the Easy Jig® Gen 1, and then the revolutionary Easy Jig Gen 2. We thought through every possible detail to improve the user experience with Easy Jig® Gen 3 and took into account hundreds of suggestions from our customers. No detail was too small to be overlooked. The result is quite simply the finest 80% lower jig ever produced. This is the first jig in the world to account for tolerance variances across any possible lower, allowing them to mount at their true datum points. An all-new mounting surface with our "Trident" front pin completely eliminates yaw, pitch, and roll of the lower while in the milling process. We invite side by side comparison to any other 80% lower jig on the market, nothing else compares.

  Universal
  • The only jig known to fit every known AR-15, AR-9, AR-45, and DPMS Gen 1 .308 lower
  • Converts between AR-15 and .308 in seconds
  • No adapter pieces are required to convert, adjustment is fast and easy.
  • Self centering mechanism ensures perfection even with exotic billet lower designs
  • Tested to work with over 23 of the most common handheld routers
  • Completely compatible with full size routers (adapter required). Click to view list of compatible routers.
Fast
  • Less drilling, drill only 1 hole prior to milling
  • World’s fastest jig, can complete an 80% lower in under 30 minutes
  • Jig requires no disassembly of side walls to insert or remove 80% lowers
  • 80% lowers can be inserted or removed in under 10 seconds
Easy
  • Built-in measuring gauges. No measuring tools needed
  • No drill press needed, only a hand drill and handheld router
  • Included Shop Vac Attachment means less mess!
Durable
  • End mill never makes contact with jig, no wear surfaces
  • End mill supported by premium quality bearing with extended service life
  • Drill block made with hardened steel
  • Hardened steel bushings in the sidewalls for durability
Note: Router not included, it is required to use this jig.

80% LOWER REPLACEMENT PROGRAM: IN THE REMOTE CHANCE YOU MAKE A MISTAKE WHILE USING AN 80% ARMS JIG THAT CAUSES FUNCTIONAL DAMAGE TO YOUR 80% ARMS LOWER, WE WILL REPLACE YOUR LOWER AT A 50% DISCOUNT OFF OF THE LIST PRICE. PLEASE SEE TERMS & CONDITIONS!

Shipping Restrictions: This item is restricted from shipping to New Jersey, New York, Hawaii, Connecticut, Rhode Island and Washington D.C.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Include Tooling?: *

Choose Options, Yes, No

Include Enhanced Drill Plate?: *

Choose Options, Yes, No

Select Your First Lower:

308 – RAW, 308 – BLACK

Select Your 2nd Lower:

308 – RAW, 308 – BLACK

Select Your 3rd Lower:

308 – RAW, 308 – BLACK

Ready Mill Upgrade?:

No Thank You, Yes – Add Speed Coat [Add $40]

Choose SpeedMill Size:

1/A, 2/B, 3/C, 4/D

Select Your Lower:

308 – RAW, 308 – BLACK