In Stock

DPMS 308 80% Lower Receiver

$154.00$184.00

The JT-10 is precision CNC-machined from solid aerospace billet aluminum. It is not a cheap forging. This is a top-tier DPMS 308 lower receiver perfect for any high quality 308 build.

SKU: N/A Categories: ,

Description

The JT-10 is precision CNC-machined from solid aerospace billet aluminum. It is not a cheap forging. This is a top-tier DPMS 308 lower receiver perfect for any high quality 308 build.

  • JUGGERNAUT TACTICAL applies its own Cerakote: ceramic-based thermoset epoxy finish in 4 color selections, which include Magpul FDE, Sniper Grey, Magpul OD Green, and Burnt Bronze.
  • The non-Cerakote finish options include Black Anodized and Pink Anodized.
  • T6 Heat-Treated 6061 Billet Aluminum
  • Completed weight: 10 ounces
  • Integral winter trigger-guard for added strength
  • Flared magwell to improve mag changes.
  • Laser engraved JTAC logo
  • Broached magwell
  • DPMS .308 AR-10
  • Threaded bolt catch • Upper tensioning screw
  • Bolt catch assembly screw
  • No roll pins need for assembly
  • Ambi Bolt Release/hardware
  • Lifetime warranty against manufacture defects
  • Threaded rear takedown pin detent hole
  • Semi safe engraved on both sides

If you would like to finish your JT-10 80% Lower at home, we offer a jig-kit here. Because 80% Lowers are not considered firearms by ATF, we can ship them right to your front door with no FFL required… but finished rifles must meet all applicable laws and you must be able to legally own a firearm. Compliance with all laws is YOUR responsibility.

Additional information

Type of Finish

None, Raw, Black Anodized (+$5.00), Cerakote Burnt Bronze (+$30.00), Cerakote Magpul OD Green (+$30.00), Cerakote Magpul FDE (+$30.00), Cerakote Sniper Grey (+$30.00)

Reviews

There are no reviews yet.

Be the first to review “DPMS 308 80% Lower Receiver”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsDPMS 308 80% Lower Receiver remove80% 308 CNC Lower Receiver FDE removeLR308 Billet Lower Receiver removeBlack 80% DPMS AR-10/308 lower WITH Lower Parts Kit remove80% 308 CNC Lower Receiver RAW removeAR 10 80 Percent Lower DPMS Gen 1 Anodized Billet Receiver remove
Image
SKU80-308-fdeQD10L80-308-raw
Rating
Price$154.00$184.00$144.00 $175.00 $199.95$119.00$115.00$120.50
Stock
Availability
Add to cart

Select options

Add to cart

Add to cart

Add to cart

Add to cart

Select options

DescriptionThe JT-10 is precision CNC-machined from solid aerospace billet aluminum. It is not a cheap forging. This is a top-tier DPMS 308 lower receiver perfect for any high quality 308 build.
Weight 1.12 lbs
Dimensions 9.75 × 4.25 × 2.25 in
Billet .308 lower receiver manufactured by Quentin Defense, made in Gilbert, Arizona.
Black Anodized 80% DPMS 308 lower with Lower Parts Kit
Weight 1.12 lbs
Dimensions 9.75 × 4.25 × 2.25 in
  • NEW rear take-down slot!
  • Gen 1 DPMS 80% Lower Receiver
  • 7075 T6 aircraft-grade aluminum
  • Accuracy to within one thousandth of an inch (+/- 0.001)
  • Broached Magwell
  • Integrated Trigger Guard
  • Hard coated, anodized black to MIL-A-8625 Type III Class 1
ContentThe JT-10 is precision CNC-machined from solid aerospace billet aluminum. It is not a cheap forging. This is a top-tier DPMS 308 lower receiver perfect for any high quality 308 build.
  • JUGGERNAUT TACTICAL applies its own Cerakote: ceramic-based thermoset epoxy finish in 4 color selections, which include Magpul FDE, Sniper Grey, Magpul OD Green, and Burnt Bronze.
  • The non-Cerakote finish options include Black Anodized and Pink Anodized.
  • T6 Heat-Treated 6061 Billet Aluminum
  • Completed weight: 10 ounces
  • Integral winter trigger-guard for added strength
  • Flared magwell to improve mag changes.
  • Laser engraved JTAC logo
  • Broached magwell
  • DPMS .308 AR-10
  • Threaded bolt catch • Upper tensioning screw
  • Bolt catch assembly screw
  • No roll pins need for assembly
  • Ambi Bolt Release/hardware
  • Lifetime warranty against manufacture defects
  • Threaded rear takedown pin detent hole
  • Semi safe engraved on both sides
If you would like to finish your JT-10 80% Lower at home, we offer a jig-kit here. Because 80% Lowers are not considered firearms by ATF, we can ship them right to your front door with no FFL required... but finished rifles must meet all applicable laws and you must be able to legally own a firearm. Compliance with all laws is YOUR responsibility.
80% 308 CNC Lower Receiver FDE
  • Matches with Aero Precision M5 upper receiver.
  • Works with DPMS parts & magazines
  • Flat Dark Earth Cerakote (Magpul H-267Q)
  • Fully CNC machined from solid 6061 aircraft grade aluminum
  • We ONLY purchase raw aluminum manufactured in USA
  • Broached magwell
  • Integrated trigger guard
  • 6-32 threaded pin/screw, for the bolt catch.   (replaces roll pin)
  • Added nylon tipped torsion screw in rear of lower.
Quentin Defense Billet Lower Receiver. LR308 Style. -Manufactured from a solid billet block of aerospace grade 6061-T6 aluminum. -Accepts most upper receivers designed from the LR308 platform. -Accepts all standard mil-spec AR15 internals. -Will accept mil-spec or commercial receiver extension. -Must ship to a licensed firearms dealer (FFL) in your state of residence. -AZ residents are welcome to pick up at our facility in Gilbert, Arizona Select local pickup at check out.   This is a firearm purchase and all firearm purchases require an FFL to ship to.  Please include your desired FFL for transfer in the comments section when making your purchase and we will contact the dealer on your behalf. **We are a licensed firearms dealer (FFL Holder), all firearm sales require a federal background check. Local firearms transactions can be completed in person at our store in Gilbert, AZ or we can ship to your desired FFL holder for transfer. Buyer assumes all shipping costs, transfer fees may be incurred at time of transfer, check with your FFL Dealer for details. All State and Federal Laws apply to every firearm transaction. Check your local laws to ensure the legality of your purchase prior to making said purchase. All applicable taxes apply.**  

Additional information

Weight 28 oz
MANUFACTURER: Quentin Defense
Color Black (BLK)
Material: 6061 T6 Aluminum
Coating: Type III Class 2 Hard Coat Anodize
Specification: DPMS Style

80% Black DPMS AR-10/308 Lower Receiver with Lower Parts Kit

The 80% Black Anodized DPMS 308 Lower receiver and  LPK  Value Buy has been put together with 7075-T6 Hardcoat Anodized Lower.  Along with our AR-10/308 Lower comes with a complete AR-10 LPK ready to complete the internal workings of your lower once it has been machined to completion. The operations left to be completed on our 80% lower is as follows:
  • fire control group
  • trigger pin
  • hammer pin
  • trigger slot
  • safety selector hole.
Features of the 308 Lower and LPK value Pack:
  • DPMS 80% Lower and Lower Parts Kit
  • Lower Hardcoat Type III Anodized
  • Complete LPK including fire control Group
  • Savings of Approx. 10% off buying separately

The 80% Lower Receiver is not a Federal Firearms License item. This receiver is machined to 80 percent and still requires machining to be completed.

Weight 6 lbs
Color Black
Platform AR-10
Lower Material 7075 T6 Aluminum
80% 308 CNC Lower Receiver RAW
  • Matches with Aero Precision M5 upper receiver.
  • Works with DPMS parts & magazines
  • Fully CNC machined from solid 6061 aircraft grade aluminum
  • We ONLY purchase raw aluminum manufactured in USA
  • Broached magwell
  • Integrated trigger guard
  • 6-32 threaded pin/screw, for the bolt catch.   (replaces roll pin)
  • Added nylon tipped torsion screw in rear of lower.
At American Made Tactical, we know the lower receiver is the lifeblood of any AR build, which is why we designed our anodized billet receiver for your AR10 80% lower Gen 1 DPMS build. Our receiver is made from 7075 T6 aircraft-grade aluminum and features a new rear take-down slot. This lower receiver was made to fit most gen 1 AR10 80 lower DPMS builds and was fabricated to meet our high-performance standards for the range or field.  Purchase a new black anodized billet lower receiver to finish your AR10 build today.

What is the difference between DPMS Gen 1 and 2?

There are few differences between the gen 1 DPMS AR 10 lower that we’ve come to love and the newer gen 2 rifle. The most significant difference between these two is that gen 1 AR10 80 lower DPMS has been around a lot longer, which means you’ll find much more third-party support for supplies and products when building and upgrading your gen 1 rifle than with a gen 2. To those on a budget, this could be a huge factor. The gen 1 AR10 lower is also a very substantial gun in size and weight, while gen 2 shaves off a few pounds and is significantly shorter. This added mobility and a new design will help with options such as handguards but keep in mind that if you’re going to be building or upgrading any gen 2 rifles, you’ll most likely be stuck with proprietary options.

Are DPMS lowers any good?

While there are a lot of options in the market for a new AR10 lower, the key to truly getting the rifle you want is with a DPMS lower. With a DPMS AR 10 Lower, you have much higher compatibility for parts and upgrades to your DPMS lower build vs. Armalite, and the parts are more readily available. You’ll also be able to interchange magazine types, styles, and brands with DPMS 80% lower. While a lower may take a little bit of work to build, the end result of building an AR10 80% Lower is a rifle that is 100% yours and usually a much more cost-effective alternative to buying a brand new DPMS with the same high-performance shooting capabilities.  

ADDITIONAL INFORMATION:

WEIGHT 1 lbs
DIMENSIONS 9 × 2 × 3 in
WEAPON TYPE AR-10
MAKE Billet
FINISH Anodized
QUANTITY 1
FIRE/SAFE ENGRAVING OPTION Yes, I want the Fire/Safe Engraving, No, I do not want the Fire/Safe Engraving
ADD BOLT CATCH SCREW? Yes, No
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Type of Finish

None, Raw, Black Anodized (+$5.00), Cerakote Burnt Bronze (+$30.00), Cerakote Magpul OD Green (+$30.00), Cerakote Magpul FDE (+$30.00), Cerakote Sniper Grey (+$30.00)

Fire/Safe Engraving Option

Yes, I want Fire/Safe Engraving, No, I do not want Fire/Safe Engraving

Add Bolt Catch Screw?

Yes, No