In Stock

Polymer 80 Glock 19 PF940C 80% Compact Pistol Frame Kit

$109.99$209.97

Description

The Polymer 80 Compact Pistol Frame PF940C kit is designed to replace the frame of a compact size Glock pistol such as the Glock 19 or 23. It can be built for either 9mm luger or 40 S&W caliber with only a few parts difference. The kit is easy to complete with the jig and bits included. The only required tools are a drill and files. However, this process is made easier with the use of a few extra tools: dremel, end snips and C-Clamps. See the video in the picture section above for more details.

Works with Generation 1 – 3 Glock Compatible Parts.

Product Overview:

  • Enhanced Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Aggressive Grip Texture
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Rear Rail Module (RRM™)
  • Hardened Pins for LBRS ™ and RRM™
  • Complete Finishing Jig and Drill bits Included
  • Compatible with Glock® 19/23 Gen3 Components

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Rockeybrass.com is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H.

DISCLAIMER: We do not provide legal advice or legal counsel. It is your responsibility to understand the respective State laws and Federal laws. This product is to be installed by a competent gunsmith. No liability is expressed or implied for damage or injury which may result from installation or use of this product. These frames require milling and possibly fitment of the various parts included. We do not provide build and/or gunsmithing advice.

All issues and warranty for the Polymer 80 frames are handled by Polymer 80 directly.

Due to the legal nature of these kits, we do not accept returns or exchanges on these frame kits for any reason.

Please note that we cannot ship these to the state of New Jersey or DC.

Washington state residents will need to provide a copy or photo of their Drivers License and Concealed Pistol License prior to shipping.

Additional information

Color *

Black, FDE, Grey, OD Green, Blue Titanium, Cobalt

Add Frame Parts Kit

None, Rockey Brass Frame Parts Kit (+$49.99)

Add Holster

None, Adaptive IWB Holster for PF940C Right Handed (+$49.99), Adaptive IWB Holster for PF940C Left Handed (+$49.99)

Reviews

There are no reviews yet.

Be the first to review “Polymer 80 Glock 19 PF940C 80% Compact Pistol Frame Kit”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsPolymer 80 Glock 19 PF940C 80% Compact Pistol Frame Kit removeMATRIX ARMS AR15 80% LOWER RECEIVER 5.56/.223 (ANODIZED) **IN STOCK NOW** removeANODIZED AR15 80% Lower Receiver - Optional Safety Engraving removeBLACK ANODIZED SKELETONIZED AR-15 80% LOWER RECEIVER removeAR-15 Anodized Forged 80% Lower Receiver removeType III Hard Anodized Billet AR-15 80% Lower Receiver remove
ImagePlaceholder
SKUPF940C-BLK
Rating
Price$109.99$209.97 $94.85 $95.00 $114.95$75.00$80.00$99.99
Stock
Availability
Add to cart

Select options

Add to cart

Add to cart

Add to cart

Select options

Add to cart

Description
  • 7075 T6 aircraft-grade aluminum
  • Accuracy to within one thousandth of an inch (+/- 0.001)
  • Broached Magwell
  • Hard coated, anodized black to MIL-A-8625 Type III Class 1
  • Optional Fire/Safe Engraving
  • 100% Mil-Spec.
  • Made in the USA
Content

The Polymer 80 Compact Pistol Frame PF940C kit is designed to replace the frame of a compact size Glock pistol such as the Glock 19 or 23. It can be built for either 9mm luger or 40 S&W caliber with only a few parts difference. The kit is easy to complete with the jig and bits included. The only required tools are a drill and files. However, this process is made easier with the use of a few extra tools: dremel, end snips and C-Clamps. See the video in the picture section above for more details.

Works with Generation 1 - 3 Glock Compatible Parts. Product Overview:
  • Enhanced Ergonomics and Features
  • High-Strength Reinforced Polymer Construction
  • Aggressive Grip Texture
  • Picatinny/STANAG Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System (LBRS™)
  • Stainless Steel Rear Rail Module (RRM™)
  • Hardened Pins for LBRS ™ and RRM™
  • Complete Finishing Jig and Drill bits Included
  • Compatible with Glock® 19/23 Gen3 Components

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Rockeybrass.com is not affiliated with nor endorsed by Glock, Inc. or Glock Ges.m.b.H. DISCLAIMER: We do not provide legal advice or legal counsel. It is your responsibility to understand the respective State laws and Federal laws. This product is to be installed by a competent gunsmith. No liability is expressed or implied for damage or injury which may result from installation or use of this product. These frames require milling and possibly fitment of the various parts included. We do not provide build and/or gunsmithing advice. All issues and warranty for the Polymer 80 frames are handled by Polymer 80 directly. Due to the legal nature of these kits, we do not accept returns or exchanges on these frame kits for any reason. Please note that we cannot ship these to the state of New Jersey or DC. Washington state residents will need to provide a copy or photo of their Drivers License and Concealed Pistol License prior to shipping.

DESCRIPTION

***80% LOWERS ARE NOW IN STOCK AND SHIP IN 0-2 DAYS FROM ORDER***

  NO FFL needed for shipping 80% lowers NO FFL needed for shipping 80% lowers   The Matrix Arms 80% lower receiver is one of the most popular and trusted receivers of any type on the market today! We manufacture thousands of receivers per week at our New Hampshire facility and have been for over 10 years! Machined from 7075 T-6 aluminum forgings, the Matrix Arms 80% lower receiver is the perfect foundation for your next DIY rifle build.  Simply machine out the hammer/trigger pocket to turn this 80% receiver into a fully functioning lower.  Utilizes standard .250 takedown holes and .156 fire control pins. NO FFL needed for shipping 80% lowers Features include:
  • FIRE/SAFE engraved
  • Takedown-lug pocket to check upper compatibility
  • Class 3 Type 2 matte black anodization
Key words: Ghost gun, Ghost guns, 80% lower, 80 lower, executive order, ban, biden sucks

Cerro Anodized 80 Percent Lower with Optional Safety Engraving

This Cerro-forged 80 percent lower is not an FFL item; classified by the ATF as a non-firearm. It's made from T6 heat-treated 7075 aluminum with a Type III hardcoat anodized finish to protect against wear and tear and corrosion. Its magwells have been flared and broached, and all it needs is a machined trigger and safety well in order to be a fully functional, mil-spec lower receiver. Review some of the graphics that can be engraved by clicking on the Magwell and Safety tabs above, and customize the look of your 80 percent lower. Shop at RightToBear.com and save with great discount pricing on your AR15 parts without sacrificing quality. Don't forget to select 1 of the 28 different safety markings from the drop down menu. The safety engraving reference chart can be seen under the "CHART A" tab above. Engraving will be on both sides of lower.
  • 80% machined (just needs trigger and safety well machined)
  • 7075 aluminum
  • Cerro forged
  • T6 Heat treated
  • Magwells are flared and broached
  • Type III Hardcoat anodized finish
  • Cerro Forge (Key hole may or may not be machined off)
Please note: We will not ship 80% blanks to the following states: NY, NJ, D.C., and RI. Some states such as: CT and HI may require 80% frames to be serialized. This is not legal advice, and we encourage you to check your local and state laws prior to ordering.  IF YOUR STATE DOES REQUIRE SERIALIZATION, YOU CAN FOLLOW THIS LINK TO ORDER A PRE-ENGRAVED LOWER RECEIVER.

Description

Shipping Status:  Ships in 3-5 Days! (See the Shipping/Returns webpage for updates) All machining processes for our Black Anodized Skeletonized AR 15 80% Lower are completed other than drilling/milling the FCG (Fire Control Group) pocket and trigger slot, and drilling the Selector switch, Trigger and Hammer pin holes. – Mates with any mil-spec AR-15 upper receiver – CNC Machined from 6061-T6 Billet Aluminum – Rear lug pocket already machined – ‘Pictogram’ style Fire-Safe Engravings – Integral trigger guard for added overall strength – Machined (not broached) skeleton Mag Well with wide flare – Ltd lifetime warranty against manufacturer defects Optional: – Bolt release pin hole Drilled and Tapped 6-32 – Cerakote Graphite Black Availability / Shipping: Our black anodized skeletonized AR 80 Percent Lowers are typically backordered, but please see our Shipping/Returns webpage for the latest shipping details.
DESCRIPTION Product proudly made in the USA on CNC machines made in the USA.  Let’s keep America working! We know the 80 percent lower receiver is the life-blood of any AR rifle build. Without a proper lower receiver, your weapon won’t perform up to your standards. That is why every American Made Tactical 80 lower we produce is CNC-machined or forged with the highest precision possible to ensure each 80 lower meets our high performance standards on the range or in the field. In addition, we pride ourselves on customer service, our goal is to deliver every 80 lower, upper, jig kit, or accessory to your door faster than our competitors. Feel free to contact us at [email protected] or reach out to us on Facebook or Twitter. Please note: This 80% AR-15 Anodized Forged Lower Receiver does not come with the 80% AR-15 Lower Receiver Jig or High End Tooling Kit required for finishing.
  • Full mil-spec part compatibility ensures maximum rifle customization
  • Withstands the harshest punishment from any situation using ultra-tough design, precision machined from aircraft-grade billet aluminum for superior strength
  • Broached, flared mag well aids with faster, easier magazine reloads
  • Heavy-duty, integral trigger guard enables winter use with gloves
  • Threaded Bolt Catch
  • Rear takedown lug pocket completed
Lifetime warranty against manufacturing defects guarantees impeccable quality. We can ship to your door because 80% lower receivers are not considered firearms by the ATF. No FFL required. Feel the rewarding satisfaction of creating your own lower receiver - secure yours today.

We manufacture Type III Hard Anodized AR-15 Lowers using US sourced aerospace grade 6061 aluminum which is more resistant to corrosion and is much easier to mill than any other alloy used to make lower receivers. Our 80% lower AR receivers carry a lifetime warranty.

Compatible with Gen 2 & Gen 3 Jig. Not compatible with Gen 1 AR-15 Easy Jig® & Drill Press Jig.

Shipping Restrictions: This item is restricted from shipping to New Jersey, New York, Hawaii, Connecticut, Rhode Island, and Washington D.C.

Weight1
DimensionsN/AN/AN/AN/A9 × 2 × 3 cmN/A
Additional information
Color *

Black, FDE, Grey, OD Green, Blue Titanium, Cobalt

Add Frame Parts Kit

None, Rockey Brass Frame Parts Kit (+$49.99)

Add Holster

None, Adaptive IWB Holster for PF940C Right Handed (+$49.99), Adaptive IWB Holster for PF940C Left Handed (+$49.99)

Weight 1 kg
Dimensions 9 × 2 × 3 cm
Fire/Safe Engraving Option

Yes, I want the Fire/Safe Engraving, No, I do not want the Fire/Safe Engraving