In Stock

Polymer80 80% Lower Receiver and Jig Kit (AR-15) – Black

$75.00

SKU: P80-NKIT-BLK Categories: ,

Description

Description

The AR-15 market continues to evolve, introducing innovative and lightweight solutions for a rifle platform that was always intended to be nimble, quick, and simple. We’re excited to introduce that latest innovation in partnership with Polymer80! Introducing the ultralight polymer G150 Phoenix AR-15 80% Lower. Let’s take a look:

This featherweight polymer 80% lower has been through extensive testing to ensure it’s strong enough to handle the rigors of abuse and long days at the range or the next three-gun competition. After testing and revision, Polymer80 reinforced this lower’s initial design by 15% before final production. The result is a tried-and-true AR-15 80% lower with a final weight of just 0.3 pounds!

For instructions on the G150 Phoenix, click here.

G150 Phoenix Polymer 80% Lower Features:

  • Weighs just 0.3 pounds
  • Composite solid core design
  • Stiffened magazine well
  • Reinforced buffer tube housing
  • Integrated trigger guard
  • Metal inserts for pistol grip, bolt catch pin
  • Includes proprietary 80% Lower Jig
  • Works with any other 80% Jig!

Why a Polymer AR-15 80% Lower?

Polymer 80% lowers have been well-tested and proven among the AR-15 and 80% lower community. This ultralight lower affords the same ruggedness as any aluminum lower, yet its construction also affords many unique benefits.

If you’re nervous about machining an 80% lower, this polymer lower will be the perfect way to ease into the practice. Polymer is incredibly simple to drill and mill, and the material is forgiving.

The G150 Phoenix Includes Its Jig – and it’s the most affordable!

Many aluminum 80% lowers cost at least $50 to $100 with no jig. The G150 Phoenix Polymer 80% lower includes its own jig and all the tooling needed to complete it! The G150 Phoenix’s affordability and simple construction make it the perfect 80% lower for your first build, or for simple practice!

Made in the USA Lifetime Warranty

Reviews

There are no reviews yet.

Be the first to review “Polymer80 80% Lower Receiver and Jig Kit (AR-15) – Black”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsPolymer80 80% Lower Receiver and Jig Kit (AR-15) - Black removeANODIZED AR15 80% Lower Receiver - Optional Safety Engraving removePolymer80 RL556v3™ 80% Lower Receiver and Jig Kit (AR-15) - Black removePolymer80 80% Lower Receiver and Jig Kit (LR-308) remove80% Forged Lower Receiver for AR-15 removeAR-15 Anodized Forged 80% Lower Receiver remove
ImagePlaceholder
SKUP80-NKIT-BLKP80-RL556v3-BLKP80-308KIT-BLK80-LOWER-RECEIVER
Rating
Price$75.00 $95.00$79.99$75.00 $49.99$75.00$80.00
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Select options

DescriptionPlease note: We are not able to legally ship to NY, NJ, CT, RI, or DC. If you place an order with a shipping address for one of these states, the order will be canceled.
  • 7075 T6 aircraft-grade aluminum
  • Accuracy to within one thousandth of an inch (+/- 0.001)
  • Broached Magwell
  • Hard coated, anodized black to MIL-A-8625 Type III Class 1
  • Optional Fire/Safe Engraving
  • 100% Mil-Spec.
  • Made in the USA
Content

Description

The AR-15 market continues to evolve, introducing innovative and lightweight solutions for a rifle platform that was always intended to be nimble, quick, and simple. We’re excited to introduce that latest innovation in partnership with Polymer80! Introducing the ultralight polymer G150 Phoenix AR-15 80% Lower. Let’s take a look: This featherweight polymer 80% lower has been through extensive testing to ensure it’s strong enough to handle the rigors of abuse and long days at the range or the next three-gun competition. After testing and revision, Polymer80 reinforced this lower’s initial design by 15% before final production. The result is a tried-and-true AR-15 80% lower with a final weight of just 0.3 pounds! For instructions on the G150 Phoenix, click here.

G150 Phoenix Polymer 80% Lower Features:

  • Weighs just 0.3 pounds
  • Composite solid core design
  • Stiffened magazine well
  • Reinforced buffer tube housing
  • Integrated trigger guard
  • Metal inserts for pistol grip, bolt catch pin
  • Includes proprietary 80% Lower Jig
  • Works with any other 80% Jig!

Why a Polymer AR-15 80% Lower?

Polymer 80% lowers have been well-tested and proven among the AR-15 and 80% lower community. This ultralight lower affords the same ruggedness as any aluminum lower, yet its construction also affords many unique benefits. If you’re nervous about machining an 80% lower, this polymer lower will be the perfect way to ease into the practice. Polymer is incredibly simple to drill and mill, and the material is forgiving.

The G150 Phoenix Includes Its Jig – and it’s the most affordable!

Many aluminum 80% lowers cost at least $50 to $100 with no jig. The G150 Phoenix Polymer 80% lower includes its own jig and all the tooling needed to complete it! The G150 Phoenix’s affordability and simple construction make it the perfect 80% lower for your first build, or for simple practice!
Made in the USA Lifetime Warranty

Cerro Anodized 80 Percent Lower with Optional Safety Engraving

This Cerro-forged 80 percent lower is not an FFL item; classified by the ATF as a non-firearm. It's made from T6 heat-treated 7075 aluminum with a Type III hardcoat anodized finish to protect against wear and tear and corrosion. Its magwells have been flared and broached, and all it needs is a machined trigger and safety well in order to be a fully functional, mil-spec lower receiver. Review some of the graphics that can be engraved by clicking on the Magwell and Safety tabs above, and customize the look of your 80 percent lower. Shop at RightToBear.com and save with great discount pricing on your AR15 parts without sacrificing quality. Don't forget to select 1 of the 28 different safety markings from the drop down menu. The safety engraving reference chart can be seen under the "CHART A" tab above. Engraving will be on both sides of lower.
  • 80% machined (just needs trigger and safety well machined)
  • 7075 aluminum
  • Cerro forged
  • T6 Heat treated
  • Magwells are flared and broached
  • Type III Hardcoat anodized finish
  • Cerro Forge (Key hole may or may not be machined off)
Please note: We will not ship 80% blanks to the following states: NY, NJ, D.C., and RI. Some states such as: CT and HI may require 80% frames to be serialized. This is not legal advice, and we encourage you to check your local and state laws prior to ordering.  IF YOUR STATE DOES REQUIRE SERIALIZATION, YOU CAN FOLLOW THIS LINK TO ORDER A PRE-ENGRAVED LOWER RECEIVER.

Description

Keep your AR build "light in the lower" while retaining its strength and integrity with the RL556v3 by Polymer80. This polymer made 80% lower receiver features a solid core design, flared magwell, and beefier mil-spec buffer tube housing to ensure your AR can take everyday wear and tear. For instructions on using the 80% Lower Receiver Jig, click here.

The RL556v3 Kit Includes:

  • 80% Polymer AR15 Lower Receiver (Mil-spec)
  • Polymer Jig
  • Trigger Hole Drill Guide
  • Drill Bits and End Mill

Why a Polymer AR-15 80% Lower?

Polymer 80% lowers have been well-tested and proven among the AR-15 and 80% lower community. This ultralight lower affords the same ruggedness as any aluminum lower, yet its construction also affords many unique benefits. If you’re nervous about machining an 80% lower, this polymer lower will be the perfect way to ease into the practice. Polymer is incredibly simple to drill and mill, and the material is forgiving.
Made in the USA Lifetime Warranty

Description

Polymer80 has attacked the AR-10 80% lower with a new, ultralight approach! Introducing the Warrhogg .308 AR-10 Polymer 80% lower, the world’s lightest DPMS-platform .308 lower on the market. This new contender addresses a big problem for AR-15s chambered in .308, and that’s weight. Lightweight and maneuvrability have always plagued the AR-10 and .308 AR-15 platform, until now. Weighing less than half a pound, the Warrhogg .308 80% lower promises to change the game – but is it strong enough? Made from weapons-grade polymer! The Warrhogg AR-10 80% lower is constructed from the same reinforced material that all current-production, off-the-shelf polymer firearms are built from. Polymer80 took the same to repeatedly test and re-develop their polymer lowers until they achieved a unit capable of handling thousands of rounds without failure. The Warrhogg comes reinforced, ready for battle! The Warrhogg .308 lower features plenty of reinforcements based on real testing to guarantee reliability. Polymer80 beefed up the buffer tube ring, reinforced the receiver with a solid core, added ribbing across the entire top surface, and developed a no-thread pistol grip mount. Lastly, the mag well has been stiffened, all while retaining a featherweight profile. For instructions on the Warrhogg, click here.

Warrhogg .308 AR-10 Polymer 80% Lower features:

  •         Weighs less than half a pound!
  •         Includes 80% lower jig
  •         Includes all necessary tooling
  •         Includes pistol grip nut and screw
  •         Reinforced Polymer Construction
  •         Integrated trigger guard
  •         Gripped mag well for ergonomics
  •         Compatible with all 80% lower Jigs
  •         Compatible with DPM Gen 1 Lower Parts Kit
Made in the USA Lifetime Warranty
DESCRIPTION
  • Manufactured in our own precision machine shop right here in Greer, South Carolina.
    • Raw (Non-Anodized)
    • Forged in 7075-T6 Aluminum
    • Broached and Flared Magwell
    • Tumbled and Hand De-Burred
    • ATF Approved
      ALL PAID ORDERS WILL BE SHIPPED ASAP! FORGINGS ON HAND AND MACHINING 24/7!

    What is an 80% Lower Receiver?

    This 80% lower receiver is manufactured in the USA in our precision machine shop in Greer, South Carolina. Sometimes referred to as a “paperweight”, the 80% lower is not considered a firearm or a complete receiver until you finish it. Therefore, no FFL is required in order to buy or ship the product. When you are looking to build out your AR, buy the American-made 80% forged lower from Palmetto State. Nothing leaves our machine shop that doesn’t meet our precision standards for quality. You can be assured of a highly accurate and aligned lower. Made with forged 7075 aluminum, your 80% lower is built with the strongest aluminum and provides a slight advantage in weight compared to a billet option. Some manufacturers use cheaper aluminum and are not as concerned with precision machining, leaving you dissatisfied with an inferior product. At Palmetto State Defense, we stand behind the quality of our 80% lowers. With an 80% forged lower, there is no serial or registration required since it is not a firearm. If you live in a not-so-friendly gun state, be sure you are well aware of the laws before purchasing.
DESCRIPTION Product proudly made in the USA on CNC machines made in the USA.  Let’s keep America working! We know the 80 percent lower receiver is the life-blood of any AR rifle build. Without a proper lower receiver, your weapon won’t perform up to your standards. That is why every American Made Tactical 80 lower we produce is CNC-machined or forged with the highest precision possible to ensure each 80 lower meets our high performance standards on the range or in the field. In addition, we pride ourselves on customer service, our goal is to deliver every 80 lower, upper, jig kit, or accessory to your door faster than our competitors. Feel free to contact us at [email protected] or reach out to us on Facebook or Twitter. Please note: This 80% AR-15 Anodized Forged Lower Receiver does not come with the 80% AR-15 Lower Receiver Jig or High End Tooling Kit required for finishing.
Weight1
DimensionsN/AN/AN/AN/AN/A9 × 2 × 3 cm
Additional information
Weight 1 kg
Dimensions 9 × 2 × 3 cm
Fire/Safe Engraving Option

Yes, I want the Fire/Safe Engraving, No, I do not want the Fire/Safe Engraving