Cerro Anodized 80 Percent Lower with Optional Safety Engraving
This Cerro-forged 80 percent lower is not an FFL item; classified by the ATF as a non-firearm. It's made from T6 heat-treated 7075 aluminum with a Type III hardcoat anodized finish to protect against wear and tear and corrosion. Its magwells have been flared and broached, and all it needs is a machined trigger and safety well in order to be a fully functional, mil-spec lower receiver. Review some of the graphics that can be engraved by clicking on the Magwell and Safety tabs above, and customize the look of your 80 percent lower. Shop at RightToBear.com and save with great discount pricing on your AR15 parts without sacrificing quality.
Don't forget to select 1 of the 28 different safety markings from the drop down menu. The safety engraving reference chart can be seen under the "CHART A" tab above. Engraving will be on both sides of lower.
- 80% machined (just needs trigger and safety well machined)
- 7075 aluminum
- Cerro forged
- T6 Heat treated
- Magwells are flared and broached
- Type III Hardcoat anodized finish
- Cerro Forge (Key hole may or may not be machined off)
Please note: We will not ship 80% blanks to the following states: NY, NJ, D.C., and RI. Some states such as: CT and HI may require 80% frames to be serialized. This is not legal advice, and we encourage you to check your local and state laws prior to ordering.
IF YOUR STATE DOES REQUIRE SERIALIZATION, YOU CAN FOLLOW THIS LINK TO ORDER A PRE-ENGRAVED LOWER RECEIVER.
|The 80% Machined Lower isn't finished and comes in raw aluminum ready for your coating of choice. Made from 7075-T6 and features a 3/4 inch grip screw. These 80% Lowers are Designed off the AR-15 Platform.
No FFL is required to purchase this 80% Lower.
Please note that the rear lug pocket for the upper must be finished in the machining process in order to seat an upper
California requires 80% Receivers to be serialized before fabrication. California residents must submit to a background before building. Other states have banned the sale, ownership, manufacture, and use of 80% Receivers. Because of changing firearm laws, this list may not be all-inclusive. The following are the states that have banned 80% receivers: NJ, NY, CT, HI, DC and RI.|
Every AR build starts from the ground up with a good lower receiver. Start yours in style with this badass 80% lower receiver by Outdoor Ops. This beauty comes to you in graphite black, so you can make sure that aesthetically, your build will look as awesome as it performs. See below for additional details.
- Machined from American-made Mil-Spec 6061 aluminum billet
- Graphite Matte Black Cerakote finish
- Threaded bolt catch hole (threaded pin not necessary for function)
- Armalite™ style (standard, mil-spec) lower parts kit compatible
- Accepts standard and PMAG™ magazines
Lifetime warranty against manufacturing defects guarantees impeccable quality. We can ship to your door because 80% lower receivers are not considered firearms by the ATF. No FFL required. Feel the rewarding satisfaction of creating your own lower receiver - secure yours today.
- Full mil-spec part compatibility ensures maximum rifle customization
- Withstands the harshest punishment from any situation using ultra-tough design, precision machined from aircraft-grade billet aluminum for superior strength
- Broached, flared mag well aids with faster, easier magazine reloads
- Heavy-duty, integral trigger guard enables winter use with gloves
- Threaded Bolt Catch
- Rear takedown lug pocket completed
We manufacture Type III Hard Anodized AR-15 Lowers using US sourced aerospace grade 6061 aluminum which is more resistant to corrosion and is much easier to mill than any other alloy used to make lower receivers. Our 80% lower AR receivers carry a lifetime warranty.
Compatible with Gen 2 & Gen 3 Jig. Not compatible with Gen 1 AR-15 Easy Jig® & Drill Press Jig.
Shipping Restrictions: This item is restricted from shipping to New Jersey, New York, Hawaii, Connecticut, Rhode Island, and Washington D.C.
What is an Anodized 80% Lower Receiver?
You can rest assured of quality with this Anodized 80% Lower Receiver. All of our products are made in Greer, SC in our precision machine shop.
With an 80% lower, it is often referred to as a “paperweight” or a “ghost gun”. Until you complete your build, the 80% lower is not considered a firearm or a complete receiver. Because it’s not a firearm, no FFL is necessary to buy, ship, or receive the product.
When the lower comes anodized, as ours does here, it has had a protective coat created by oxidizing the aluminum. This is sometimes also referred to as a hard coat. The anodization helps to protect the lower from wear and tear, as well as any potential corrosion.
If you are considering building out an AR-15, buy the made in the USA Anodized 80% Forged Lower from Palmetto State. We stand behind the quality of our products and don’t let anything leave our shop without meeting our quality and precision standards.
We guarantee the accuracy and alignment of our lowers. Your 80% lower is built with the strongest aluminum (7075) and provides a slightly lighter feel compared to a billet option.
With an 80% forged lower, there is no serial or registration required since it is not a firearm. If you live in a not-so-friendly gun state, be sure you are well aware of the laws before purchasing.
Please note: We are not able to legally ship to NY, NJ, CT, RI, or DC. If you place an order with a shipping address for one of these states, the order will be canceled.
|This AR-15 Skeleton 80% lower is to the same standard of quality and performance, skeletonized in an appealing geometric design.
Where Can’t we ship? : Shipping to New Jersey, New York, Hawaii, Connecticut, Rhode Island and Washington D.C. is not possible due to state regulations against 80% lowers.
NOTE: If you have any questions or concerns our world-class customer support is here for you. Please give us a call, email us or message our live support chat.
If you are looking to purchase more than one. The bulk option is available at: 80% Lower Bulk Receivers (5-Pack) – Black
No FFL Required! This product listing is an 80% lower, meaning that it is not a firearm, and therefore requires no FFL transfer in order to be shipped.
If no “Add to Cart” button is visible, it means we do not have any stock of this product. Keep checking back to see if the item is in stock, or join the waiting list for this product and be notified via email when the product comes back in stock! This option is only available for members with valid emails!
Here at AR-15 Site, strive to give our customers the highest quality 80% lower AR-15 and polymer 80 parts on the market! Give us a call or visit our support with any products you might be having trouble with. Any reviews we receive on our 80% Lower products will be taken into account with great care.
- The product specs:
- Full mil-spec part compatibility ensures maximum rifle customization
- Forged from 7075-T6 aluminum
- Black anodized finish
- This is NOT a complete receiver and therefore not an FFL item
- The Magwell on this 80 percent lower receiver is is skeletonized for appearance, but does not hinder performance at all!
- Withstands harsh punishment from any situation using tough design, precision machined from aircraft-grade aluminum for optimal strength
- Made in the USA