Description | | DISCLAIMER:
At U.S. PATRIOT ARMORY, we by no means provide legal advice or legal counsel. Every builder needs to research their respective City, State and Federal laws in the area they are ordering from. We DO NOT provide gunsmithing advice. U.S. PATRIOT ARMORY is not responsible for improper builds, damage or injury due to user error.
* Our products are not sold or shipped to residents of New Jersey
WILL NOT SHIP 80% Lowers to the following areas: NAVADA, WASHINGTON DC, WASHINGTON, RHODE ISLAND, DELAWARE, NEW YORK, MASSACHUSETTS, CONNECTICUT, NEW JERSEY, HAWAII, MONTGOMERY COUNTY-MD, PHILADELPHIA-PA, SACRAMENTO-CA, SAN FRANSISCO-CA and LOS ANGELES-CA | | | | |
Content | Description
Every AR build starts from the ground up with a good lower receiver. Start yours in style with this badass 80% lower receiver by Outdoor Ops. This beauty comes to you in graphite black, so you can make sure that aesthetically, your build will look as awesome as it performs. See below for additional details.
Specs:
- Machined from American-made Mil-Spec 6061 aluminum billet
- Graphite Matte Black Cerakote finish
- Threaded bolt catch hole (threaded pin not necessary for function)
- Armalite™ style (standard, mil-spec) lower parts kit compatible
- Accepts standard and PMAG™ magazines
| AR-15 JTE 80% LOWER RECEIVER - BLACK ANODIZED - NO LOGO
- Type 3 Black Anodized or raw finish.
- T6 Heat-Treated 6061 Billet Aluminum
- Completed weight: 8 ounces
- Integral winter trigger-guard for added strength
- Flared magwell to improve mag changes.
- Broached magwell
- Lifetime warranty against manufacture defects
| Description
(1) Blemished Black 80% Lower Receiver:
This receiver is blemished. Marks will vary.
The lower receiver is Fully-Functional.
This is a NON-REFUNDABLE product. These blems may or may not be Fire/Safe marked models.
Note: These are not covered under any warranty or guarantee.
- For AR-15 builds (5.56/.223/300 BLK/6.5 Grendel)
- Type III Hard Anodized
- Color: Anodized Black
- 100% Mil-Spec
- Quantity: 1
- Forged 7075-T6 Aluminum
- Broached Magwell
- NO FFL REQUIRED
| Product Description
The RL556v3™ features Polymer80’s proprietary polymer composite, a solid core design, flared magwell, and beefier mil-spec buffer tube housing. The pistol grip area features a unique threadless design specific to Polymer80 rifle lowers.
The kit includes:
- 80% Polymer AR15 Lower Receiver (Mil-spec)
- Polymer Jig
- Trigger Hole Drill Guide
- Drill Bits and End Mill
Available colors:
Black, White, FDE, OD Green, Gray
| Product Description
.308 80% Lower Receiver & Jig
Includes a jig and all the drill bits.
After two years of planning, design, engineering, and testing, we're proud to introduce the industry's first reinforced polymer receiver designed for the DPMS styled .308 in an 80% format.
- Industrial strength, finest reinforced polymer material....nothing held back.
- Feel the difference the second you pick it up.
- Rock solid frame, injection molded from a fully automated system that was two years in the making.
The .308 80% Lower Receiver Design features:
- Unique reinforced polymer design with solid core design
- ATF compliant design
- Beefed up buffer tube ring and ribbing across the entire upper surface area.
- No-thread design on pistol grip area.
- Stiffened magwell, ultra-light design.
- See product page for additional parts list
Is it legal?
YES! The 308 unit is well within the defined parameters of a "reciever blank" defined by the ATF and therefore has not yet reached a stage of manufacture that meets the definition of firearm frame or receiver found in the Gun Control Act of 1968 (GCA).
http://www.atf.gov/content/contact-us/pressroom/receiver-blanks-Q%26As
P80-308 Kit List: Each Lower and Jig Kit comes with the following:
|
Lower Description |
ITEM |
Qty per Lower |
|
308 Lower Receiver |
W308 Lower |
1 |
|
Pistol Grip Nut |
3/8in |
1 |
|
Pistol Grip Screw |
1.5in |
1 |
Jig Description |
ITEM |
Qty per Lower |
Warrhogg .308 Jig |
J100 |
1 |
End-Mill Bit with Laser Etched Depth Mark |
7/16" end mill bit |
1 |
Drill Bit, Safety Selector Switch Hole |
3/8" drill bit |
1 |
Drill Bit, Pin Holes for Trigger & Hammer |
5/32" drill bit |
1 |
Drill Bit, for Trigger Hole |
5/16" drill bit |
1 |
Trigger Guide |
TG100 |
1 |
| Description
(1) Raw 80% Lower Billet Receiver:
- Color: Raw - no anodization
- 100% Mil-Spec
- Quantity: 1
- Fire/Safe Marked: Yes
- Oversized built-in trigger guard
- Rear takedown lug is pre-milled
- Billet 6061-T6 Aluminum
- 100% Made in the USA
- NO FFL REQUIRED
No FFL is required to purchase this lower receiver. This Billet 6061-T6 Aluminum 80% lower receiver is not considered a firearm and is compliant with the gun control act of 1968 and not classified as a firearm as defined in 18 U.S.C. 921(a)(3).
Shipping Restrictions
AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.
|
Reviews
There are no reviews yet.