Content | This Elite Builder 80% Lower Jig is compatible with our Forged 80% Lowers and our Premium Fire/Safe Marked Billet 80% Lowers!Other manufacturer's billet 80% lowers may be compatible with this 80% lower jig, provided their lower receiver design adheres to mil-spec specifications.
The fast, accurate, bombproof 80% Lower Jig from Elite Builder now ships with equally high-quality drill bits and end
mill bits. This gunsmithing combo kit allows you to confidently cut and drill multiple AR-15 and AR-9 80% lower receivers without losing speed or accuracy. Hardened steel template plates and a self-aligning design make machining quick and free of guesswork. Thanks to its reinforced design, the Elite Builder jig can reliably handle any polymer, billet, or forged 80% lower with a standard (mil-spec) configuration.
You can also now choose to include the enhanced drill plate to further make it easier for you to drill and hollow out your fire control group pocket.
PLEASE NOTE: Tooling for this jig is optional. You'll need to select whether you would like accompanying tooling with your jig.
See the Elite Builder Jig's instructions here!
Drill Bits & End Mill Bits Included
To make cutting and drilling as quick and easy as possible, Elite Builder included HSS bits: High-speed steel bits designed specially for gunsmithing and machining aluminium firearm receivers. The tool kit includes:
- (1) ⅜ Drill Bit - 5”
- (1) 5/32 Drill Bit - 3”
- (1) ⅜ Short End Mill - 3”
- (1) 5/16 Short End Mill - 4”
- (1) ⅜ Long End Mill - 4”
Jig Features & Specs:
- Self-aligning jig requires no special fitting during setup
- Compatible with any standard AR-15 or AR-9 80% lower
- Black anodized finish protects against rust and corrosion
- Pre-drilled holes for hammer, trigger, and safety pin holes
- Reinforced steel template plates for completing multiple lowers
*Important - This jig was designed with a drill press in mind for completing your 80% lower and is not designed to be used with a router/laminate trimmer.
Shipping Restrictions
AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily. | This Elite Builder 80% Lower Jig is DISCONTINUED.
Compatible with our Forged 80% Lowers and our Premium Fire/Safe Marked Billet 80% Lowers! Other manufacturers' billet 80% lowers may be compatible with the Elite Builder 80% lower jig, provided their lower receiver design adheres to mil-spec specifications. However, we cannot guarantee that other manufacturers' lowers, including 9mm calibers, will absolutely fit into the jig without modification unless they meet mil-spec parameters.
The Elite Builder 80% Lower Jig and tool kit combo is the key to cutting and drilling multiple 80% lower receivers for the AR-15 or AR-9 without losing efficiency or accuracy. Made from hardened steel plates, the Elite Builder jig can machine any standard (mil-spec) forged, billet, or polymer receiver without breaking a sweat, with results as accurate as one-thousandth (0.001”) of an inch.
You can also now choose to include the enhanced drill plate to further make it easier for you to drill and hollow out your fire control group pocket.
PLEASE NOTE: Tooling for this jig is optional. You'll need to select whether you would like accompanying tooling with your jig.
Quality HSS Bits
The jig’s only as good as the bits you use it with. Choose to add on the optional tooling - quality industrial-grade HSS (high-speed steel) drill bits and end mill bits to cut through all that aluminum in no time. All you need to complete your receiver blank is a basic drill press and about two hours’ time. The tool kit includes:
- (1) ⅜ Drill Bit - 5”
- (1) 5/32 Drill Bit - 3”
- (1) ⅜ Short End Mill - 3”
- (1) 5/16 Short End Mill - 4”
- (1) ⅜ Long End Mill - 4”
Jig Features & Specs:
- Self-aligning jig requires no special fitting during setup
- Compatible with any standard AR-15 or AR-9 80% lower
- Black anodized finish protects against rust and corrosion
- Pre-drilled holes for hammer, trigger, and safety pin holes
- Reinforced steel template plates for completing multiple lowers
| NOTE: This 80% Lower Jig comes with the regular router plate as seen in the picture.
The patented Easy Jig® Gen 2 is the world's easiest to use, fully universal, 80% lower jig capable of finishing AR-15, AR-9, and AR-45 lowers. Easy Jig® Gen 2 is the culmination of our years of experience gained from manufacturing the world’s first router jig and the best selling 80% lower jig in history, the Easy Jig® Gen 1.
We thought through every possible detail to improve the user experience with Easy Jig® Gen 2 and took into account hundreds of suggestions from our customers. No detail was too small to be overlooked. The result is quite simply the finest 80% lower jig ever produced. This may not be the absolute cheapest jig on the market, but it is arguably the very best. We invite side by side comparison to any other 80% lower jig on the market, nothing else compares.
Our AR-15 / AR-9 only version of Easy Jig® Gen 2 has all the amazing features of the Easy Jig® Gen 2 Multi-Platform, except it does not fit .308 lowers. If you want to complete AR-15, AR-9, and .308 in the same jig, Easy Jig® Gen 2 Multi-Platform is the best choice. The AR-15 / AR-9 only jig cannot be retrofitted to accommodate .308 lowers.
Click here to view Easy Jig® Gen 2 Multi-Platform, our combined AR-15 / AR-9 / .308 jig.
New! Optional Hardened Steel Hand Drill Stabilizers™ provide extra stability when using a hand drill instead of a drill press. Hand Drill Stabilizers™ are recommended although not required when using a hand drill. You can watch a short video about this exclusive feature and purchase them by clicking here.
Universal
- Fits all known AR-15, AR-9, and AR-45 Designs
- Self-centering mechanism ensures perfection even with exotic billet lower designs
- Tested to work with over 23 of the most common handheld routers
- The only jig that works with full-size routers.
Click to view list of compatible routers.
Fast
- Less drilling, drill only 1 hole prior to milling
- World’s fastest jig, can complete an 80% lower in under 30 min
- Jig requires no disassembly to insert or remove 80% lower
- 80% lowers can be inserted or removed in under 10 seconds
Easy
- Built-in measuring gauges. No measuring tools needed
- No drill press needed, only a hand drill and handheld router
- Included Shop Vac Attachment means less mess!
- Includes detailed manual, quick start guide, and video tutorial download
Durable
- End mill never makes contact with jig, no wear surfaces
- End mill supported by premium quality bearing with extended service life
- No reported bearing failures out of thousands of jigs sold
- Drill block made with hardened steel
- Solid Steel 3/4 inch thick side plates
- Jig weighs over 7 pounds
Note: Tool kit and 80% lower not included.
80% Lower Replacement Program: In the remote chance you make a mistake while using an 80% Arms Jig that damages your 80% Arms lower, we will replace your lower at a 50% discount off of the list price.
Made in USA | Wanting to make the dive into building your own firearms, but aren't sure where to start? You've came to the right place. Not everyone has powertool or gunsmithing experience, and tackling both at once for a new project can seem a bit daunting. So we've made things as easy as possible for you to get started, but everything you need in one simple package. With a lower included, all you need to do is turn your router on, and get milling. It's really that easy.
The threaded bolt catch screw that is required with our .308 lowers does not come with our lower. However, it does come standard in our .308 Lower Parts Kit.
Here's what comes in the Starter Kit:
- (1) 80% Raw 308 Lower
- Easy Jig® GEN 3 Multi-Platform Jig (Handheld Router Compatible)
- Easy Jig® Official Tool Kit, which includes:
- Solid Carbide End mill
- Optimized Fluting for Aluminum
- Extremely Rigid Support
- Direct-Thread to your Router
- Longer Lasting, Averaging 5-7 Lowers per bit for Experienced Users
- Made in the USA
LOWER FEATURES:
- Full mil-spec part compatibility ensures maximum rifle customization
- Withstands the harshest punishment from any situation using ultra-tough design, precision machined from aircraft-grade billet aluminum for superior strength.
- Broached, flared mag well aids with faster, easier magazine reloads
- Heavy-duty, integral trigger guard enables winter use with gloves
- Unique, breakthrough design for easy bolt catch installation with a regular punch eliminates need for an expensive, special tool
- Rear takedown lug pocket completed
The patented Easy Jig® Gen 3 Multiplatform™ replaces the Gen 2 as the world's easiest to use, fully universal, 80% lower jig capable of finishing AR-15, AR-9, AR-45 and DPMS gen 1 pattern .308 80% lower receivers without the need for any additional adapter pieces. The jig converts between AR-15 and .308 by quickly adjusting the rear buffer support, making it easier than ever before to mill any platform you desire.
The Easy Jig® Gen 3 is the culmination of our years of experience gained from manufacturing the world’s first router jig and the best selling 80% lower jig in history, the Easy Jig® Gen 1, and then the revolutionary Easy Jig Gen 2. We thought through every possible detail to improve the user experience with Easy Jig® Gen 3 and took into account hundreds of suggestions from our customers. No detail was too small to be overlooked. The result is quite simply the finest 80% lower jig ever produced. This is the first jig in the world to account for tolerance variances across any possible lower, allowing them to mount at their true datum points. An all-new mounting surface with our "Trident" front pin completely eliminates yaw, pitch, and roll of the lower while in the milling process. We invite side by side comparison to any other 80% lower jig on the market, nothing else compares.
Universal
- The only jig known to fit every known AR-15, AR-9, AR-45, and DPMS Gen 1 .308 lower
- Converts between AR-15 and .308 in seconds
- No adapter pieces are required to convert, adjustment is fast and easy.
- Self centering mechanism ensures perfection even with exotic billet lower designs
- Tested to work with over 23 of the most common handheld routers
- Completely compatible with full size routers (adapter required). Click to view list of compatible routers.
Fast
- Less drilling, drill only 1 hole prior to milling
- World’s fastest jig, can complete an 80% lower in under 30 minutes
- Jig requires no disassembly of side walls to insert or remove 80% lowers
- 80% lowers can be inserted or removed in under 10 seconds
Easy
- Built-in measuring gauges. No measuring tools needed
- No drill press needed, only a hand drill and handheld router
- Included Shop Vac Attachment means less mess!
Durable
- End mill never makes contact with jig, no wear surfaces
- End mill supported by premium quality bearing with extended service life
- Drill block made with hardened steel
- Hardened steel bushings in the sidewalls for durability
Note: Router not included, it is required to use this jig.
80% LOWER REPLACEMENT PROGRAM: IN THE REMOTE CHANCE YOU MAKE A MISTAKE WHILE USING AN 80% ARMS JIG THAT CAUSES FUNCTIONAL DAMAGE TO YOUR 80% ARMS LOWER, WE WILL REPLACE YOUR LOWER AT A 50% DISCOUNT OFF OF THE LIST PRICE. PLEASE SEE TERMS & CONDITIONS!
Shipping Restrictions: This item is restricted from shipping to New Jersey, New York, Hawaii, Connecticut, Rhode Island and Washington D.C. | For our customers who want it all - this is your kit! Purchase everything you'll need from us to quickly and easily finish AR-15 and AR-308 80% Lower Receivers.
A complete breakdown of what's included in the Freedom Kit:
The Router Jig PRO
(1) Universal AR-15, AR-9, .308 and AR-10 Multiplatform Jig
AR-15 Billet 6061-T6 80% Lower Receiver:
(1) 5D Tactical Billet AR-15 80% Lower Receiver - FIRE/SAFE Engraved - Type III Black Anodized Finish
AR-308 Billet 6061-T6 80% Lower Receiver:
(1) 5D Tactical AR-308 Lower 80% Receiver - FIRE/SAFE Engraved - Type III Black Anodized Finish
Pro Jig Tool Kit (Select the ReadyMILL™ size required for your router by referencing the chart below):
(1) 5D Tactical ReadyMILL™
(1) 3/8" HSS Black and Gold Drill Bit
(1) 21/64" HSS Black and Gold Drill Bit
(1) 5/32" HSS Black and Gold Drill Bit
D (Requires Full-Size Router Plate - Buy Here)
United States Patent #9,982,958
Other Patents Pending | Description
308 & AR15 jig top plates are interchangeable.
This jig ONLY fits Broken Arms 308 lower receiver.
Broken Arms 308 Lower Receiver jig, tooling kit, and a drill press is all you need to turn your 80% receiver into a fully functional 100% 308 receiver.
- CNC machined
- Hard anodized type III
- Hardened drill bushings
- Integrated depth chart
- All parts are individually engraved with drill diameters and depths
KIT CONTENTS:
- 2) side plates
- 5) top plates
- 4) 1/4-20 x 3/4 screws
- 2) 1/4-20 x 2 screws
Receiver not included |
Reviews
There are no reviews yet.