Content | Description
(1) Raw 80% Lower Billet Receiver:
- Color: Raw - no anodization
- 100% Mil-Spec
- Quantity: 1
- Fire/Safe Marked: Yes
- Oversized built-in trigger guard
- Rear takedown lug is pre-milled
- Billet 6061-T6 Aluminum
- 100% Made in the USA
- NO FFL REQUIRED
No FFL is required to purchase this lower receiver. This Billet 6061-T6 Aluminum 80% lower receiver is not considered a firearm and is compliant with the gun control act of 1968 and not classified as a firearm as defined in 18 U.S.C. 921(a)(3).
| The 80% Machined Lower isn't finished and comes in raw aluminum ready for your coating of choice. Made from 7075-T6 and features a 3/4 inch grip screw. These 80% Lowers are Designed off the AR-15 Platform.
No FFL is required to purchase this 80% Lower.
Please note that the rear lug pocket for the upper must be finished in the machining process in order to seat an upper
California requires 80% Receivers to be serialized before fabrication. California residents must submit to a background before building. Other states have banned the sale, ownership, manufacture, and use of 80% Receivers. Because of changing firearm laws, this list may not be all-inclusive. The following are the states that have banned 80% receivers: NJ, NY, CT, HI, DC and RI. | DESCRIPTION
***80% LOWERS ARE NOW IN STOCK AND SHIP IN 0-2 DAYS FROM ORDER***
NO FFL needed for shipping 80% lowers
NO FFL needed for shipping 80% lowers
The Matrix Arms 80% lower receiver is one of the most popular and trusted receivers of any type on the market today! We manufacture thousands of receivers per week at our New Hampshire facility and have been for over 10 years! Machined from 7075 T-6 aluminum forgings, the Matrix Arms 80% lower receiver is the perfect foundation for your next DIY rifle build. Simply machine out the hammer/trigger pocket to turn this 80% receiver into a fully functioning lower. Utilizes standard .250 takedown holes and .156 fire control pins.
NO FFL needed for shipping 80% lowers
Features include:
- FIRE/SAFE engraved
- Takedown-lug pocket to check upper compatibility
- Class 3 Type 2 matte black anodization
Key words: Ghost gun, Ghost guns, 80% lower, 80 lower, executive order, ban, biden sucks | The 80% Machined Lower isn't finished and comes in raw aluminum, ready for your coating of choice. Made from 7075-T6 and features a 3/4 inch grip screw. These 80% Lowers are Designed off the AR-15 Platform. No FFL is required to purchase this 80% Lower.
***Please note that the rear lug pocket for the upper must be finished in the machining process in order to seat an upper***
The Mil Spec AM-15 stripped Upper Receiver is machined from 7075 T6 Aluminum forging. Featuring M4 feed ramps, this upper receiver is machined to Military Specifications & Standards and can be used with multiple calibers on the AR-15 platform. This upper receiver comes not finished in raw aluminum, ready for your coating of choice to make it completely custom! Match this Upper with one of our Lower Receivers for a solid fit.
One 80% Lower & One Stripped Upper Receiver.
California requires 80% Receivers to be serialized before fabrication. California residents must submit to a background before building. Other states have banned the sale, ownership, manufacture, and use of 80% Receivers. Because of changing firearm laws, this list may not be all-inclusive. The following are the states that have banned 80% receivers: NJ, NY, CT, HI, DC and RI. | DESCRIPTION
- Manufactured in our own precision machine shop right here in Greer, South Carolina.
- Raw (Non-Anodized)
- Forged in 7075-T6 Aluminum
- Broached and Flared Magwell
- Tumbled and Hand De-Burred
- ATF Approved
ALL PAID ORDERS WILL BE SHIPPED ASAP! FORGINGS ON HAND AND MACHINING 24/7!
What is an 80% Lower Receiver?
This 80% lower receiver is manufactured in the USA in our precision machine shop in Greer, South Carolina. Sometimes referred to as a “paperweight”, the 80% lower is not considered a firearm or a complete receiver until you finish it. Therefore, no FFL is required in order to buy or ship the product.
When you are looking to build out your AR, buy the American-made 80% forged lower from Palmetto State. Nothing leaves our machine shop that doesn’t meet our precision standards for quality. You can be assured of a highly accurate and aligned lower. Made with forged 7075 aluminum, your 80% lower is built with the strongest aluminum and provides a slight advantage in weight compared to a billet option.
Some manufacturers use cheaper aluminum and are not as concerned with precision machining, leaving you dissatisfied with an inferior product. At Palmetto State Defense, we stand behind the quality of our 80% lowers.
With an 80% forged lower, there is no serial or registration required since it is not a firearm. If you live in a not-so-friendly gun state, be sure you are well aware of the laws before purchasing.
| Product Description
.308 80% Lower Receiver & Jig
Includes a jig and all the drill bits.
After two years of planning, design, engineering, and testing, we're proud to introduce the industry's first reinforced polymer receiver designed for the DPMS styled .308 in an 80% format.
- Industrial strength, finest reinforced polymer material....nothing held back.
- Feel the difference the second you pick it up.
- Rock solid frame, injection molded from a fully automated system that was two years in the making.
The .308 80% Lower Receiver Design features:
- Unique reinforced polymer design with solid core design
- ATF compliant design
- Beefed up buffer tube ring and ribbing across the entire upper surface area.
- No-thread design on pistol grip area.
- Stiffened magwell, ultra-light design.
- See product page for additional parts list
Is it legal?
YES! The 308 unit is well within the defined parameters of a "reciever blank" defined by the ATF and therefore has not yet reached a stage of manufacture that meets the definition of firearm frame or receiver found in the Gun Control Act of 1968 (GCA).
http://www.atf.gov/content/contact-us/pressroom/receiver-blanks-Q%26As
P80-308 Kit List: Each Lower and Jig Kit comes with the following:
|
Lower Description |
ITEM |
Qty per Lower |
|
308 Lower Receiver |
W308 Lower |
1 |
|
Pistol Grip Nut |
3/8in |
1 |
|
Pistol Grip Screw |
1.5in |
1 |
Jig Description |
ITEM |
Qty per Lower |
Warrhogg .308 Jig |
J100 |
1 |
End-Mill Bit with Laser Etched Depth Mark |
7/16" end mill bit |
1 |
Drill Bit, Safety Selector Switch Hole |
3/8" drill bit |
1 |
Drill Bit, Pin Holes for Trigger & Hammer |
5/32" drill bit |
1 |
Drill Bit, for Trigger Hole |
5/16" drill bit |
1 |
Trigger Guide |
TG100 |
1 |
|
Reviews
There are no reviews yet.