| Content | Wanting to make the dive into building your own firearms, but aren't sure where to start? You've came to the right place. Not everyone has powertool or gunsmithing experience, and tackling both at once for a new project can seem a bit daunting. So we've made things as easy as possible for you to get started, but everything you need in one simple package. With a lower included, all you need to do is turn your router on, and get milling. It's really that easy.
The threaded bolt catch screw that is required with our .308 lowers does not come with our lower. However, it does come standard in our .308 Lower Parts Kit.
Here's what comes in the Starter Kit:
- (1) 80% Raw 308 Lower
- Easy Jig® GEN 3 Multi-Platform Jig (Handheld Router Compatible)
- Easy Jig® Official Tool Kit, which includes:
- Solid Carbide End mill
- Optimized Fluting for Aluminum
- Extremely Rigid Support
- Direct-Thread to your Router
- Longer Lasting, Averaging 5-7 Lowers per bit for Experienced Users
- Made in the USA
LOWER FEATURES:
- Full mil-spec part compatibility ensures maximum rifle customization
- Withstands the harshest punishment from any situation using ultra-tough design, precision machined from aircraft-grade billet aluminum for superior strength.
- Broached, flared mag well aids with faster, easier magazine reloads
- Heavy-duty, integral trigger guard enables winter use with gloves
- Unique, breakthrough design for easy bolt catch installation with a regular punch eliminates need for an expensive, special tool
- Rear takedown lug pocket completed
The patented Easy Jig® Gen 3 Multiplatform™ replaces the Gen 2 as the world's easiest to use, fully universal, 80% lower jig capable of finishing AR-15, AR-9, AR-45 and DPMS gen 1 pattern .308 80% lower receivers without the need for any additional adapter pieces. The jig converts between AR-15 and .308 by quickly adjusting the rear buffer support, making it easier than ever before to mill any platform you desire.
The Easy Jig® Gen 3 is the culmination of our years of experience gained from manufacturing the world’s first router jig and the best selling 80% lower jig in history, the Easy Jig® Gen 1, and then the revolutionary Easy Jig Gen 2. We thought through every possible detail to improve the user experience with Easy Jig® Gen 3 and took into account hundreds of suggestions from our customers. No detail was too small to be overlooked. The result is quite simply the finest 80% lower jig ever produced. This is the first jig in the world to account for tolerance variances across any possible lower, allowing them to mount at their true datum points. An all-new mounting surface with our "Trident" front pin completely eliminates yaw, pitch, and roll of the lower while in the milling process. We invite side by side comparison to any other 80% lower jig on the market, nothing else compares.
Universal
- The only jig known to fit every known AR-15, AR-9, AR-45, and DPMS Gen 1 .308 lower
- Converts between AR-15 and .308 in seconds
- No adapter pieces are required to convert, adjustment is fast and easy.
- Self centering mechanism ensures perfection even with exotic billet lower designs
- Tested to work with over 23 of the most common handheld routers
- Completely compatible with full size routers (adapter required). Click to view list of compatible routers.
Fast
- Less drilling, drill only 1 hole prior to milling
- World’s fastest jig, can complete an 80% lower in under 30 minutes
- Jig requires no disassembly of side walls to insert or remove 80% lowers
- 80% lowers can be inserted or removed in under 10 seconds
Easy
- Built-in measuring gauges. No measuring tools needed
- No drill press needed, only a hand drill and handheld router
- Included Shop Vac Attachment means less mess!
Durable
- End mill never makes contact with jig, no wear surfaces
- End mill supported by premium quality bearing with extended service life
- Drill block made with hardened steel
- Hardened steel bushings in the sidewalls for durability
Note: Router not included, it is required to use this jig.
80% LOWER REPLACEMENT PROGRAM: IN THE REMOTE CHANCE YOU MAKE A MISTAKE WHILE USING AN 80% ARMS JIG THAT CAUSES FUNCTIONAL DAMAGE TO YOUR 80% ARMS LOWER, WE WILL REPLACE YOUR LOWER AT A 50% DISCOUNT OFF OF THE LIST PRICE. PLEASE SEE TERMS & CONDITIONS!
Shipping Restrictions: This item is restricted from shipping to New Jersey, New York, Hawaii, Connecticut, Rhode Island and Washington D.C. | This Elite Builder 80% Lower Jig is compatible with our Forged 80% Lowers and our Premium Fire/Safe Marked Billet 80% Lowers!Other manufacturer's billet 80% lowers may be compatible with this 80% lower jig, provided their lower receiver design adheres to mil-spec specifications.
The fast, accurate, bombproof 80% Lower Jig from Elite Builder now ships with equally high-quality drill bits and end
mill bits. This gunsmithing combo kit allows you to confidently cut and drill multiple AR-15 and AR-9 80% lower receivers without losing speed or accuracy. Hardened steel template plates and a self-aligning design make machining quick and free of guesswork. Thanks to its reinforced design, the Elite Builder jig can reliably handle any polymer, billet, or forged 80% lower with a standard (mil-spec) configuration.
You can also now choose to include the enhanced drill plate to further make it easier for you to drill and hollow out your fire control group pocket.
PLEASE NOTE: Tooling for this jig is optional. You'll need to select whether you would like accompanying tooling with your jig.
See the Elite Builder Jig's instructions here!
Drill Bits & End Mill Bits Included
To make cutting and drilling as quick and easy as possible, Elite Builder included HSS bits: High-speed steel bits designed specially for gunsmithing and machining aluminium firearm receivers. The tool kit includes:
- (1) ⅜ Drill Bit - 5”
- (1) 5/32 Drill Bit - 3”
- (1) ⅜ Short End Mill - 3”
- (1) 5/16 Short End Mill - 4”
- (1) ⅜ Long End Mill - 4”
Jig Features & Specs:
- Self-aligning jig requires no special fitting during setup
- Compatible with any standard AR-15 or AR-9 80% lower
- Black anodized finish protects against rust and corrosion
- Pre-drilled holes for hammer, trigger, and safety pin holes
- Reinforced steel template plates for completing multiple lowers
*Important - This jig was designed with a drill press in mind for completing your 80% lower and is not designed to be used with a router/laminate trimmer.
Shipping Restrictions
AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily. | This Elite Builder 80% Lower Jig is DISCONTINUED.
Compatible with our Forged 80% Lowers and our Premium Fire/Safe Marked Billet 80% Lowers! Other manufacturers' billet 80% lowers may be compatible with the Elite Builder 80% lower jig, provided their lower receiver design adheres to mil-spec specifications. However, we cannot guarantee that other manufacturers' lowers, including 9mm calibers, will absolutely fit into the jig without modification unless they meet mil-spec parameters.
The Elite Builder 80% Lower Jig and tool kit combo is the key to cutting and drilling multiple 80% lower receivers for the AR-15 or AR-9 without losing efficiency or accuracy. Made from hardened steel plates, the Elite Builder jig can machine any standard (mil-spec) forged, billet, or polymer receiver without breaking a sweat, with results as accurate as one-thousandth (0.001”) of an inch.
You can also now choose to include the enhanced drill plate to further make it easier for you to drill and hollow out your fire control group pocket.
PLEASE NOTE: Tooling for this jig is optional. You'll need to select whether you would like accompanying tooling with your jig.
Quality HSS Bits
The jig’s only as good as the bits you use it with. Choose to add on the optional tooling - quality industrial-grade HSS (high-speed steel) drill bits and end mill bits to cut through all that aluminum in no time. All you need to complete your receiver blank is a basic drill press and about two hours’ time. The tool kit includes:
- (1) ⅜ Drill Bit - 5”
- (1) 5/32 Drill Bit - 3”
- (1) ⅜ Short End Mill - 3”
- (1) 5/16 Short End Mill - 4”
- (1) ⅜ Long End Mill - 4”
Jig Features & Specs:
- Self-aligning jig requires no special fitting during setup
- Compatible with any standard AR-15 or AR-9 80% lower
- Black anodized finish protects against rust and corrosion
- Pre-drilled holes for hammer, trigger, and safety pin holes
- Reinforced steel template plates for completing multiple lowers
| The Easy Jig® Gen 1 is a patented AR-308 80% lower jig that makes machining your 80% lower receiver easier, faster, and safer. Lower receivers finished with the .308 Easy Jig have a better finish and hold tolerances that could not be achieved using any other jig on the market today. You do not need to own a drill press or mill to use the Easy Jig®. It truly makes finishing your lower receiver a simple process. On top of all this, it’s extremely durable and can be reused for dozens of lowers. This product is proudly made in USA.
Fully compatible with our Black Anodized, Flat Dark Earth (FDE), or Raw 308 lowers.
The Easy Jig Gen 1 is NOT compatible with all other brands of .308 lowers. If you want full universal compatibility, please see our Gen 2 Easy Jig.
Easy Jig highlights:
- Easier
- Built in drill/end-mill depth gauge for the trigger and rear-shelf pockets
- Eliminates the need for expensive measurement tools
- Quick verification of depth setting – eliminates slippage issues that can ruin parts
- Eliminates constant measuring to determine depth while milling
- Safer
- End-mill downward force can’t separate the drill press taper chuck
- It is safer to move router by hand than to move the jig around on a drill press
- Uses Common Hand Tools
- The .308 Easy Jig is designed to hold tolerances using a common hand-drill
- No drill press is required, milling is done with a router
- Routers are much more portable than a drill press, easily borrowed from a friend
- Routers are made for cutting pockets using a template
- Routers are cheaper than a drill press.
- Faster
- Pocket drilling requires 10 holes drilled once – Traditional jigs require 42 holes to be drilled once, precisely aligned and clamped, then re-drilled to a larger diameter
- Trigger pocket can be cut in 6 to 11 passes vs 25 passes required with a drill press
- Router cuts pockets 5-6x faster
- Hand-drilling the trigger group/safety selector holes is faster to setup
- Lower can be completed in 1 hour (instead of 3 to 8 hours for the old drill press method)
- Durable
- The Easy Jig can be used to make dozens of lowers
- Components are Type III hard anodized for extra wear resistance
80% Lower Replacement Program: In the remote chance you make a mistake while using an 80% Arms AR-308 80% Lower Jig that damages your 80% Arms lower, we will replace your lower at a 50% discount off the list price.
*Router and tool kit are NOT included.
Shipping Restrictions: This item is restricted from shipping to New Jersey, Hawaii, Connecticut, Rhode Island and Washington D.C. | You love to build guns. You’ve heard about building an AR from scratch using little more than a drill press. This is the toolkit to get it done: The Liberty AR-15 Jig is designed to eliminate the need for expensive equipment like a router or mill. It uses simple, tough-as-Hell machining templates that allow you to fabricate the AR-15's forged or billet 80% lowers with nothing more than a drill press and vise. Of course, it does work just fine with any mill if you've got the equipment.
PLEASE NOTE: Tooling for this jig is optional. You'll need to select whether you would like accompanying tooling with your jig.
How the Liberty 80% Jig Works
The Liberty 80 Lower Jig takes a largely vertical approach to cutting your AR-15's receiver for the lower parts kit. Using the provided drill bits, you’ll first remove a large portion of aluminum from inside the main fire control cavity by drilling various pilot holes. Quick and easy. The jig tells you how far down to drill. All you need to do is control the press.
You’ll then use the end mill bits for light cutting and cleaning up the receiver’s walls before cutting a hole for the trigger. Lastly, reinforced drill bushings on the right side plate ensure your hammer, trigger, and safety pin holes are drilled perfectly through the receiver. No measurements required for these. Then you're done! The whole process takes about 1 to 2 hours for first-timers.
See the manufacturer's instructions here.
It’s All in The Bits
The secret to the Liberty 80 Lower Jig isn’t just the plates, templates, and guides. The included bits are made from quality high-speed steel (HSS). These are commercial-grade bits that can eat through forged or billet aluminum in seconds, making fabricating multiple receivers as quick as it is simple.
What’s Included
- (2) Side plates with drill bushings
- (5) Template plates for fabrication
- (1) Instruction manual
- (1) Set of drill bits (selectable option)
- (1) Set of end mill bits (selectable option)
What’s Required
- Drill Press
- Drilling Vise
- Machining Oil
- Eye Protection
- Ear Protection
With your receiver fabricated, you can install a lower parts kit and buttstock or brace, throw on an upper receiver of your choice, and hit the range in one day. | NOTE: This 80% Lower Jig comes with the regular router plate as seen in the picture.
The patented Easy Jig® Gen 2 is the world's easiest to use, fully universal, 80% lower jig capable of finishing AR-15, AR-9, and AR-45 lowers. Easy Jig® Gen 2 is the culmination of our years of experience gained from manufacturing the world’s first router jig and the best selling 80% lower jig in history, the Easy Jig® Gen 1.
We thought through every possible detail to improve the user experience with Easy Jig® Gen 2 and took into account hundreds of suggestions from our customers. No detail was too small to be overlooked. The result is quite simply the finest 80% lower jig ever produced. This may not be the absolute cheapest jig on the market, but it is arguably the very best. We invite side by side comparison to any other 80% lower jig on the market, nothing else compares.
Our AR-15 / AR-9 only version of Easy Jig® Gen 2 has all the amazing features of the Easy Jig® Gen 2 Multi-Platform, except it does not fit .308 lowers. If you want to complete AR-15, AR-9, and .308 in the same jig, Easy Jig® Gen 2 Multi-Platform is the best choice. The AR-15 / AR-9 only jig cannot be retrofitted to accommodate .308 lowers.
Click here to view Easy Jig® Gen 2 Multi-Platform, our combined AR-15 / AR-9 / .308 jig.
New! Optional Hardened Steel Hand Drill Stabilizers™ provide extra stability when using a hand drill instead of a drill press. Hand Drill Stabilizers™ are recommended although not required when using a hand drill. You can watch a short video about this exclusive feature and purchase them by clicking here.
Universal
- Fits all known AR-15, AR-9, and AR-45 Designs
- Self-centering mechanism ensures perfection even with exotic billet lower designs
- Tested to work with over 23 of the most common handheld routers
- The only jig that works with full-size routers.
Click to view list of compatible routers.
Fast
- Less drilling, drill only 1 hole prior to milling
- World’s fastest jig, can complete an 80% lower in under 30 min
- Jig requires no disassembly to insert or remove 80% lower
- 80% lowers can be inserted or removed in under 10 seconds
Easy
- Built-in measuring gauges. No measuring tools needed
- No drill press needed, only a hand drill and handheld router
- Included Shop Vac Attachment means less mess!
- Includes detailed manual, quick start guide, and video tutorial download
Durable
- End mill never makes contact with jig, no wear surfaces
- End mill supported by premium quality bearing with extended service life
- No reported bearing failures out of thousands of jigs sold
- Drill block made with hardened steel
- Solid Steel 3/4 inch thick side plates
- Jig weighs over 7 pounds
Note: Tool kit and 80% lower not included.
80% Lower Replacement Program: In the remote chance you make a mistake while using an 80% Arms Jig that damages your 80% Arms lower, we will replace your lower at a 50% discount off of the list price.
Made in USA |
Reviews
There are no reviews yet.