In Stock

Polymer80 PF940C™ 80% Compact Pistol Frame and Jig Kit (Glock® 19/23/32 Compatible)

$160.00

SKU: P80-PF940Cv1-BLK Categories: ,

Description

Description

NOTE: An end mill bit was deemed unnecessary by Polymer80 and is not included with this kit.

The Polymer80 PF940C™ 80% Compact Pistol Frame and Jig Kit includes an 80% pistol frame and the required jig to machine it for assembly with your choice of custom parts. The PF940C features a factory-style grip texture and is guaranteed to be compatible with Glock® Gen 3 components!

New builder? Read the intro guide to P80 pistols.

This frame features an extended beavertail and thumb ledge for better control. A double-undercut trigger guard enhances comfort, allowing for a firmer grip. Lastly, engineers upgraded the 22-degree grip angle to 18 degrees. This new angle provides better recoil control and quicker follow-up! Even with a new grip angle, the PF940C is still compatible with OEM and aftermarket Glock® magazines.

PF940C 80% Frame Features

  • Compatible with Glock® 19, 23 & 32 (3-Pin) Gen3 Components
  • Built for either 9mm Luger or .40 S&W
  • Improved ergonomics and finish
  • Reinforced, hardened polymer
  • Factory-style grip texture

Completing Your Frame

Download the PF940C’s tool list and instructions here.

In addition to the jig, fabricating your frame requires some basic tools. First-time fabricators should expect to spend one to two hours’ time cutting and drilling the frame. This kit does not include the other parts required to assemble your pistol once fabrication is complete. View P80 parts kits here.

What’s Included

  • 80% frame
  • 80% jig
  • Bits and instructions
  • Blank serialization plate
  • Stainless Steel Locking Block Rail
  • Stainless Steel Rear Rail Module
  • Hardened Pins for LBRS and RRM

Not a Firearm (State Laws Vary)

Because it isn’t drilled or machined and can’t be made to function in its current state, the ATF doesn’t consider the Polymer80 80% frame to be a firearm under federal law. The ATF describes 80% frames like these as “receiver blanks”. ATF says it is legal to build a firearm for personal use with no FFL under federal law. Some states have enacted additional restrictions against this practice. Other states have banned receiver blanks and other gun parts. Please check our Shipping Restrictions before placing an order. We cannot fulfill orders in restricted states for any reason.

 

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Reviews

There are no reviews yet.

Be the first to review “Polymer80 PF940C™ 80% Compact Pistol Frame and Jig Kit (Glock® 19/23/32 Compatible)”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsPolymer80 PF940C™ 80% Compact Pistol Frame and Jig Kit (Glock® 19/23/32 Compatible) removeAR-15 Anodized Forged 80% Lower Receiver remove308 80% LOWER RECEIVER AND JIG SYSTEM - OLIVE DRAB GREEN removeBlemished - Forged 80% Lower remove80% Lower Fire/Safe Marked (1-pack) removeBlack .308 80% Lower Billet Fire/Safe Engraved (1-Count) remove
ImagePlaceholder
SKUP80-PF940Cv1-BLKP80-308KIT-ODG-kit-DNU80-BLEML308A-E
Rating
Price$160.00$75.00$80.00$100.00$69.99$99.99$119.99
Stock

Out of stock

AvailabilityOut of stock
Add to cart

Add to cart

Select options

Read more

Add to cart

Add to cart

Add to cart

Description
  • 7075 T6 aircraft-grade aluminum
  • Accuracy to within one thousandth of an inch (+/- 0.001)
  • Broached Magwell
  • Hard coated, anodized black to MIL-A-8625 Type III Class 1
  • Optional Fire/Safe Engraving
  • 100% Mil-Spec.
  • Made in the USA
No FFL is required to purchase this lower receiver. This forged 7075 aluminum 80% lower receiver is not considered a firearm and is compliant with the gun control act of 1968 not classified as a firearm as defined in 18 U.S.C. 921(a)(3).

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.
Content

Description

NOTE: An end mill bit was deemed unnecessary by Polymer80 and is not included with this kit. The Polymer80 PF940C™ 80% Compact Pistol Frame and Jig Kit includes an 80% pistol frame and the required jig to machine it for assembly with your choice of custom parts. The PF940C features a factory-style grip texture and is guaranteed to be compatible with Glock® Gen 3 components! New builder? Read the intro guide to P80 pistols. This frame features an extended beavertail and thumb ledge for better control. A double-undercut trigger guard enhances comfort, allowing for a firmer grip. Lastly, engineers upgraded the 22-degree grip angle to 18 degrees. This new angle provides better recoil control and quicker follow-up! Even with a new grip angle, the PF940C is still compatible with OEM and aftermarket Glock® magazines.

PF940C 80% Frame Features

  • Compatible with Glock® 19, 23 & 32 (3-Pin) Gen3 Components
  • Built for either 9mm Luger or .40 S&W
  • Improved ergonomics and finish
  • Reinforced, hardened polymer
  • Factory-style grip texture

Completing Your Frame

Download the PF940C's tool list and instructions here. In addition to the jig, fabricating your frame requires some basic tools. First-time fabricators should expect to spend one to two hours' time cutting and drilling the frame. This kit does not include the other parts required to assemble your pistol once fabrication is complete. View P80 parts kits here. What's Included
  • 80% frame
  • 80% jig
  • Bits and instructions
  • Blank serialization plate
  • Stainless Steel Locking Block Rail
  • Stainless Steel Rear Rail Module
  • Hardened Pins for LBRS and RRM

Not a Firearm (State Laws Vary)

Because it isn't drilled or machined and can't be made to function in its current state, the ATF doesn't consider the Polymer80 80% frame to be a firearm under federal law. The ATF describes 80% frames like these as "receiver blanks". ATF says it is legal to build a firearm for personal use with no FFL under federal law. Some states have enacted additional restrictions against this practice. Other states have banned receiver blanks and other gun parts. Please check our Shipping Restrictions before placing an order. We cannot fulfill orders in restricted states for any reason.   DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
DESCRIPTION Product proudly made in the USA on CNC machines made in the USA.  Let’s keep America working! We know the 80 percent lower receiver is the life-blood of any AR rifle build. Without a proper lower receiver, your weapon won’t perform up to your standards. That is why every American Made Tactical 80 lower we produce is CNC-machined or forged with the highest precision possible to ensure each 80 lower meets our high performance standards on the range or in the field. In addition, we pride ourselves on customer service, our goal is to deliver every 80 lower, upper, jig kit, or accessory to your door faster than our competitors. Feel free to contact us at [email protected] or reach out to us on Facebook or Twitter. Please note: This 80% AR-15 Anodized Forged Lower Receiver does not come with the 80% AR-15 Lower Receiver Jig or High End Tooling Kit required for finishing.

Product Description

.308 80% Lower Receiver & Jig Includes a jig and all the drill bits. After two years of planning, design, engineering, and testing, we're proud to introduce the industry's first reinforced polymer receiver designed for the DPMS styled .308 in an 80% format.
  • Industrial strength, finest reinforced polymer material....nothing held back.
  • Feel the difference the second you pick it up.
  • Rock solid frame, injection molded from a fully automated system that was two years in the making.
The .308 80% Lower Receiver  Design features:  
  • Unique reinforced polymer design with solid core design
  • ATF compliant design
  • Beefed up buffer tube ring and ribbing across the entire upper surface area.
  • No-thread design on pistol grip area.
  • Stiffened magwell, ultra-light design.
  • See product page for additional parts list
  Is it legal? YES! The 308 unit is well within the defined parameters of a "reciever blank" defined by the ATF and therefore has not yet reached a stage of manufacture that meets the definition of firearm frame or receiver found in the Gun Control Act of 1968 (GCA). http://www.atf.gov/content/contact-us/pressroom/receiver-blanks-Q%26As P80-308 Kit List: Each Lower and Jig Kit comes with the following:
Lower Description ITEM Qty per Lower
308 Lower Receiver W308 Lower 1
Pistol Grip Nut 3/8in 1
Pistol Grip Screw 1.5in 1
Jig Description ITEM Qty per Lower
Warrhogg .308 Jig J100 1
End-Mill Bit with Laser Etched Depth Mark 7/16" end mill bit 1
Drill Bit, Safety Selector Switch Hole 3/8" drill bit 1
Drill Bit, Pin Holes for Trigger & Hammer 5/32" drill bit 1
Drill Bit, for Trigger Hole 5/16" drill bit 1
Trigger Guide TG100 1

Description

(1) Blemished Black 80% Lower Receiver: This receiver is blemished. Marks will vary. The lower receiver is Fully-Functional. This is a NON-REFUNDABLE product. These blems may or may not be Fire/Safe marked models. Note: These are not covered under any warranty or guarantee.
  • For AR-15 builds (5.56/.223/300 BLK/6.5 Grendel)
  • Type III Hard Anodized
  • Color: Anodized Black
  • 100% Mil-Spec
  • Quantity: 1
  • Forged 7075-T6 Aluminum
  • Broached Magwell
  • NO FFL REQUIRED

Description

(1) Black Fire/Safe Marked AR15 Forged 80% Lower Receiver:

  • For AR-15 builds (5.56/.223/300 BLK/6.5 Grendel)
  • Color: Anodized Black
  • Type III Hard Anodized
  • 100% Mil-Spec
  • Quantity: 1
  • Fire/Safe Marked: Yes
  • Forged 7075-T6 Aluminum
  • Broached Magwell
  • 100% Made in the USA
  • NO FFL REQUIRED

Description

Grab this billet, .308-chambered 80 percent lower to complete your own LR-308 build at home! CNC-machined right here in the U.S.A and backed by a Lifetime Warranty. This lower's compatible with DPMS Gen 1 and CMMG Mk3 .308 components.

LR-308 80 Percent Lower Features:

  • Integrated, one-piece trigger guard
  • Broached magwell for faster reloads
  • 100% Made in the USA
  • Lifetime Warranty
  • No FFL required

Specifications:

  • Caliber: .308 Winchester/7.62x51mm NATO
  • Construction: Billet 6061 T6 aluminum
  • Magazine: DPMS Gen 1/SR-25
  • Finish: Type III Hardcoat anodized
  • Engraving: "FIRE", "SAFE"
  • Buffer: Mil-spec

Parts Compatibility:

  • Upper: DPMS Gen 1, CMMG Mk3
  • Parts Kit: DPMS Gen 1, CMMG Mk3
  • Magazine: DPMS Gen 1, SR-5

Jig Compatibility

This LR-308 80% lower is not compatible with .308 80% lowers jigs from other manufacturers. This lower is compatible with the Elite Builder 308 Jig and Router Jigs. No FFL is required to purchase this 80 percent lower. This .308 80% lower receiver is not considered a firearm and is compliant with the Gun Control Act of 1968. Not classified as a firearm as defined in 18 U.S.C. 921(a)(3).
Weight1
DimensionsN/A9 × 2 × 3 cmN/AN/AN/AN/A
Additional information
Weight 1 kg
Dimensions 9 × 2 × 3 cm
Fire/Safe Engraving Option

Yes, I want the Fire/Safe Engraving, No, I do not want the Fire/Safe Engraving