In Stock

Iconic Industries Ultralite Gen2 Instigator Billet 80% Lower Receiver (Options)

$194.99$224.99

Utilizing many of the innovative features from the original Instigator, the Iconic Industries Instigator Ultralite reaches the pinnacle of design and function. This AR 80% Lower is crafted from a single block of 6061 billet aluminum and has an exceptional strength to weight ratio.

Description

Description

Included Features:

  • Bolt Catch Set Screw
  • Upper/Lower Fit Tension Screw
  • Black Anodized
  • Improved CQB grip retention features on the magazine well

Operations Left to be completed:

  • Fire Control Pocket
  • Trigger Slot
  • Trigger Pin Hole
  • Hammer Pin Hole
  • Safety Selector

Note for the AR-9 (9mm) Version only: These are compatible with Glock Small Frame Magazines. Magazine Release Included.

Note for the .308 AR Version: These lowers are DPMS Gen 1 (LR308) Patterned.

*These lowers are compatible with 5D Tactical Router Jig Systems. Other manufacturers’ jigs may not accommodate the flared mag-well and trigger guard.

* MSR Arms does it’s best to provide high-quality merchandise at great prices. As such, some of the products we offer cannot be discounted further than the listed price using a general discount code. Products such as the one you are viewing can only be discounted further with a product-specific discount code. Please contact us if you have any questions regarding this pricing policy. We are always happy to answer any questions. *

Additional information

Platform

.308 AR, AR-15, AR-9

Color

Black, Silver

Reviews

There are no reviews yet.

Be the first to review “Iconic Industries Ultralite Gen2 Instigator Billet 80% Lower Receiver (Options)”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsIconic Industries Ultralite Gen2 Instigator Billet 80% Lower Receiver (Options) removeAR-15 Anodized Forged 80% Lower Receiver removeANODIZED AR15 80% Lower Receiver - Optional Safety Engraving removeAR-15 Skeleton 80% Lower – BLACK removePACKAGED AM-15 80% LOWER RECEIVER, UNFINISHED, OPEN TRIGGER removePolymer80 80% Lower Receiver and Jig Kit (LR-308) remove
ImagePlaceholder
SKUSKU-764D2-K067-U000-0PP80-308KIT-BLK
Rating
Price$194.99$224.99$75.00$80.00 $95.00 $99.99$48.29$75.00
Stock
Availability
Add to cart

Select options

Select options

Add to cart

Add to cart

Add to cart

Add to cart

Description
Utilizing many of the innovative features from the original Instigator, the Iconic Industries Instigator Ultralite reaches the pinnacle of design and function. This AR 80% Lower is crafted from a single block of 6061 billet aluminum and has an exceptional strength to weight ratio.
  • 7075 T6 aircraft-grade aluminum
  • Accuracy to within one thousandth of an inch (+/- 0.001)
  • Broached Magwell
  • Hard coated, anodized black to MIL-A-8625 Type III Class 1
  • Optional Fire/Safe Engraving
  • 100% Mil-Spec.
  • Made in the USA
Content

Description

Included Features:
  • Bolt Catch Set Screw
  • Upper/Lower Fit Tension Screw
  • Black Anodized
  • Improved CQB grip retention features on the magazine well
Operations Left to be completed:
  • Fire Control Pocket
  • Trigger Slot
  • Trigger Pin Hole
  • Hammer Pin Hole
  • Safety Selector
Note for the AR-9 (9mm) Version only: These are compatible with Glock Small Frame Magazines. Magazine Release Included. Note for the .308 AR Version: These lowers are DPMS Gen 1 (LR308) Patterned. *These lowers are compatible with 5D Tactical Router Jig Systems. Other manufacturers’ jigs may not accommodate the flared mag-well and trigger guard. * MSR Arms does it’s best to provide high-quality merchandise at great prices. As such, some of the products we offer cannot be discounted further than the listed price using a general discount code. Products such as the one you are viewing can only be discounted further with a product-specific discount code. Please contact us if you have any questions regarding this pricing policy. We are always happy to answer any questions. *
DESCRIPTION Product proudly made in the USA on CNC machines made in the USA.  Let’s keep America working! We know the 80 percent lower receiver is the life-blood of any AR rifle build. Without a proper lower receiver, your weapon won’t perform up to your standards. That is why every American Made Tactical 80 lower we produce is CNC-machined or forged with the highest precision possible to ensure each 80 lower meets our high performance standards on the range or in the field. In addition, we pride ourselves on customer service, our goal is to deliver every 80 lower, upper, jig kit, or accessory to your door faster than our competitors. Feel free to contact us at [email protected] or reach out to us on Facebook or Twitter. Please note: This 80% AR-15 Anodized Forged Lower Receiver does not come with the 80% AR-15 Lower Receiver Jig or High End Tooling Kit required for finishing.

Cerro Anodized 80 Percent Lower with Optional Safety Engraving

This Cerro-forged 80 percent lower is not an FFL item; classified by the ATF as a non-firearm. It's made from T6 heat-treated 7075 aluminum with a Type III hardcoat anodized finish to protect against wear and tear and corrosion. Its magwells have been flared and broached, and all it needs is a machined trigger and safety well in order to be a fully functional, mil-spec lower receiver. Review some of the graphics that can be engraved by clicking on the Magwell and Safety tabs above, and customize the look of your 80 percent lower. Shop at RightToBear.com and save with great discount pricing on your AR15 parts without sacrificing quality. Don't forget to select 1 of the 28 different safety markings from the drop down menu. The safety engraving reference chart can be seen under the "CHART A" tab above. Engraving will be on both sides of lower.
  • 80% machined (just needs trigger and safety well machined)
  • 7075 aluminum
  • Cerro forged
  • T6 Heat treated
  • Magwells are flared and broached
  • Type III Hardcoat anodized finish
  • Cerro Forge (Key hole may or may not be machined off)
Please note: We will not ship 80% blanks to the following states: NY, NJ, D.C., and RI. Some states such as: CT and HI may require 80% frames to be serialized. This is not legal advice, and we encourage you to check your local and state laws prior to ordering.  IF YOUR STATE DOES REQUIRE SERIALIZATION, YOU CAN FOLLOW THIS LINK TO ORDER A PRE-ENGRAVED LOWER RECEIVER.

Skeleton 80% Lower

  • This 80 percent lower receiver is machined to mil-spec tolerances.
  • The magwell on this 80 percent lower receiver is full broached for the perfect fit every time.
  • Building your own AR-15? This 80 percent lower receiver is a great choice for any DIY gunsmith looking to build his or her own AR-15.
  • 80 percent machined to mil-spec tolerances. You get to go hands on with this lower, completing the machining for the fire control group, trigger pin, hammer pin, trigger slot, and safety selector hole yourself.
  • We hope you enjoy your build. Keep shopping rifle parts and AR-15 parts here to find an AR-15 jig kit and everything else you will need to complete your AR-15.
  • Machined to mil-spec tolerances
  • Forged from 7075-T6 aluminum
  • Black Anodized
AM-15 80% Lower Receiver, Unfinished, Open Trigger No FFL is required to purchase this item. California requires 80% Receivers to be serialized before fabrication. California residents must submit to a background before building. Other states have banned the sale, ownership, manufacture, and use of 80% Receivers. Because of changing firearm laws, this list may not be all-inclusive. The following are the states that have banned 80% receivers: NJ, NY, CT, HI, DC and RI.

Description

Polymer80 has attacked the AR-10 80% lower with a new, ultralight approach! Introducing the Warrhogg .308 AR-10 Polymer 80% lower, the world’s lightest DPMS-platform .308 lower on the market. This new contender addresses a big problem for AR-15s chambered in .308, and that’s weight. Lightweight and maneuvrability have always plagued the AR-10 and .308 AR-15 platform, until now. Weighing less than half a pound, the Warrhogg .308 80% lower promises to change the game – but is it strong enough? Made from weapons-grade polymer! The Warrhogg AR-10 80% lower is constructed from the same reinforced material that all current-production, off-the-shelf polymer firearms are built from. Polymer80 took the same to repeatedly test and re-develop their polymer lowers until they achieved a unit capable of handling thousands of rounds without failure. The Warrhogg comes reinforced, ready for battle! The Warrhogg .308 lower features plenty of reinforcements based on real testing to guarantee reliability. Polymer80 beefed up the buffer tube ring, reinforced the receiver with a solid core, added ribbing across the entire top surface, and developed a no-thread pistol grip mount. Lastly, the mag well has been stiffened, all while retaining a featherweight profile. For instructions on the Warrhogg, click here.

Warrhogg .308 AR-10 Polymer 80% Lower features:

  •         Weighs less than half a pound!
  •         Includes 80% lower jig
  •         Includes all necessary tooling
  •         Includes pistol grip nut and screw
  •         Reinforced Polymer Construction
  •         Integrated trigger guard
  •         Gripped mag well for ergonomics
  •         Compatible with all 80% lower Jigs
  •         Compatible with DPM Gen 1 Lower Parts Kit
Made in the USA Lifetime Warranty
Weight1
DimensionsN/A9 × 2 × 3 cmN/AN/AN/AN/A
Additional information
Platform

.308 AR, AR-15, AR-9

Color

Black, Silver

Weight 1 kg
Dimensions 9 × 2 × 3 cm
Fire/Safe Engraving Option

Yes, I want the Fire/Safe Engraving, No, I do not want the Fire/Safe Engraving

You're viewing: Iconic Industries Ultralite Gen2 Instigator Billet 80% Lower Receiver (Options) $194.99$224.99
Select options
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
Shopping cart close